Reviews Spiral Groove

SYHML-SHOP Multipurpose Manual Survival Drill Bit,Scotch Eye Wood Auger Drill Bit for Bushcraft and Camping 7/10/20/25mm (Size : 10mm)

  • Precision ground spiral groove for maximum drilling progress and tool life as well as excellent concentricity.
  • Made of high-speed steel (HSS) according to DIN 338 Right-hand cutting spiral groove type N, 118 ° point angle, Tapered section..
Check Stock

Rocaris 5 Pcs M3 M4 M5 M6 M8 Titanium Coated HSS Spiral Flute Metric Taps Set

  • High hardness, fast cutting, wear high temperature..
  • Spiral groove is conducive to remove crumbs, not easily broken tap..
  • Spiral Tap the crumbs into a spiral up chip evacuation, it is more suitable for the processing of.
Check Stock

CAIDU 5pcs HSS 6542 Titanium Coated Spiral Flute Metric Taps Set M3 M4 M5 M6 M8

  • Product Name: CAIDU 5pcs HSS 6542 Titanium Coated Spiral Flute Metric Taps Set M3 M4 M5 M6 M8.
  • ✔ Type Size: M3: 3 mm * 0.5 , M4: 4 mm * 0.7 , M5: 5 mm * 0.8 , M6: 6 mm * 1 , M8: 8mm * 1.25.
  • ✔ Material: HSS 6542 Titanium coating, cutting will not be left. Have good machinability. High hardness, fast cutting, wear high temperature.
  • ✔ Spiral groove is reduced to remove crumbs, not easily broken tap. Tap the crumbs into a spiral up chip evacuation, it is more suitable for the processing of blind holes and Sticky materials processing.
  • ✔Applicable Workpiece: tensile strength 750N / mm 2 or less the low-carbon steel, copper, aluminum, hardwood, plastic.
Check Stock

SpeTool CNC Router Bits Carving Set for Wood Profile V Groove Engraving Solid Carbide 1/4 Inch Shank

  • The Carving router bit sets of Tapered Ball Nose, Spiral, Cone End Mill Cutter.
  • For CNC,Engraving machine woodworking, Carving soft and hard wood, plywood, MDF, stainless steel, titanium alloy etc.
  • Long service life, Decreasing the times of changing cutters,Saving production time.
  • Include 2*carbide end mills ( 1 pc v-groove end mill, 1pcs tapered end mill ), 2*Spiral router bit (1 pc up cut, 1 pc down cut).
  • The Carbide End Mill Suit for CNC Router, xcarve and Makita, Bosch, and Any Brand Plunge Router with 1/4" Collet.
Check Stock

OCGIG 6-65mm Large Titanium Coated Step Drill HSS Spiral Groove Cone Drill Bit Hole Cutter

  • Material:：High Speed Steel(HSS) with Titanium Coated.
  • Self starting：no need for a pilot hole.Cobalt coated to reduce friction and run at cooler temperature..
  • Spiral Design：3 Flute spiral blade design makes the cutting faster and smoother, and automatically deburred from the hole when the drill bit is drilled.
  • Application：Suitable to cut holes in a variety of material like iron plate, aluminum plate, insulation boards, PVC sheet, ect.
  • Package includes：1 x 6-65mm HSS Groove Step Drill (13 Steps:6mm, 10mm, 15mm, 20mm, 25mm, 30mm, 35mm, 40mm, 45mm, 50mm, 55mm, 60mm, 65mm).
Check Stock

SpeTool CNC Router Bits Carving 8 Pcs Set for Wood Detail Profile V Groove Engraving Solid Carbide 1/4 Inch Shank

  • The Carving bits kits of Tapered Ball Nose, Spiral, Cone End Mill Cutter.
  • For CNC,Engraving machine.Carving Wood, plywood, MDF, plastics, acrylic, stainless steel, titanium alloy etc.
  • Long service life, Decreasing the times of changing cutters,Saving production time.
  • Include 3*carbide end mills ( 2 pc v-groove end mill, 1pcs tapered end mill ), 4*Spiral End Mill (3 pc up cut, 1 pc down cut), 1*ball end mill.
  • The Carbide End Mill Suit for CNC Router and Makita, Bosch, and Any Brand Plunge Router with 1/4" Collet.
Check Stock

Q Grips Earwax Remover, Ear Wax Removal, Silicone Ear Cleaner, Spiral Ear Wax Removal Kit with 16 Pcs Reusable Replacement Heads, Soft Ear Wax Remover Tool

  • Spiral Ear Wax Removal: This ear wax removal kit is designed with a spiral structure. The spiral groove makes it easy to collect and pull out ear wax from your ears, helping you maintain a clean, healthy ear canal..
  • Soft and Safe: The spiral head of this ear wax cleaner is made of soft and elastic silicone that matches the size of the ear hole and will not damage your ear canal and eardrum. Softer and more comfortable than traditional ear cleaners, and safer for adults and teenagers..
  • Easy to Use: This ear wax removal tool is not only easy to use, but also easy to clean. Simply twist the handle and follow the direction of the arrow on the handle and the soft tip with spiral grooves will easily remove ear wax. Please clean the tip with water after use..
  • Reusable Ear Wax Removal: The ear wax removal kit comes with 16 soft replacement heads and is perfect as an ear cleaning tool for the whole family. It is easy to carry and suitable for trave. Compared to disposable cleaners, the ear wax removal tool is more environmentally friendly and economical..
Check Stock

SpeTool Spiral Router Bits with UpCut 4 inch Extra Long1/4 inch Cutting Diameter 2 inch Cutting Length CNC Router Bit Carving Tool

  • Solid Carbide spiral router bit with 1/4inch shank and 1/4inch cutting diameter, 2 inch cutting length, 4 inch for total length.
  • The CNC End Mill For Plywood, OAK, MDF, and any hardwood working and Long service life for sharp.
  • Spiral bits used for smoothly upcut groove and slots, Plunge Mortises, Cycles and dado with clean edge and bottom, better than straight bits.
  • The route bit suit for CNC router and Makita, Bosch, and any brand plunge router with 1/4” collet.
  • Industrial quality control to ensure best performance.
Check Stock

EANOSIC Spiral Router Bits Up Down Compression Bit 1/2 inch Cutting Diameter with Nano Blue Coated 1/2 inch Shank Solid Carbide CNC End Mill for Wood Carving Engraver Milling Cutters Extra Long 4”

  • UP & DOWN cut spiral router bit with 1/2 inch shank and 1/2 inch cutting diameter, 1-1/2 inch cutting length, 4 inch for total length.
  • SOLID CARBIDE AND NANO BLUE COATED: The up and down cut spiral router bit is made of solid carbide. And Nano Blue Coating with high hardness and heat....
  • Spiral bits used for side milling, end milling, finish machining, etc. End Mill Bits can smoothly upcut and downcut groove and slots, mortises, cycles....
  • The CNC End Mill Router Bits apply to various wood: such as Plywood, OAK, MDF, and any hardwood working and Long service life for sharp. And also for....
  • The compression router bit suit for CNC router and any plunge routers with 1/2" collet..
Check Stock

SpeTool Spiral Router Bits with DownCut 1/8 inch Cutting Diameter, 1/4 inch Shank CNC Bits Solid Carbide End Mill for Wood Cut, Carving

  • Solid Carbide spiral Downcut router bit with 1/4inch shank and 1/4inch cutting diameter, 1/2 inch cutting length, 2 inch for total length.
  • The CNC End Mill For Plywood, OAK, MDF, and any hardwood working and Long service life for sharp.
  • Spiral bits used for smoothly downcut groove and slots, Mortises, Cycles and dados leave with clean edge and top surface, better than straight bits.
  • The route bit suit for CNC router and Makita, Bosch, and any brand plunge router with 1/4” collet.
  • Industrial quality control to ensure best performance.
Check Stock

SpeTool Spiral Downdcut Router Bits with 1/2 inch Shank, 1/2 inch Cutting Diameter Solid Carbide CNC End Mill for Wood Carving, Plunge Cut

  • Solid Carbide down cut spiral router bit with 1/2inch shank and 1/2inch cutting diameter, 1-1/4 inch cutting length, 3 inch for total length.
  • The CNC End Mill For Plywood, OAK, MDF, and any hardwood working and Long service life for sharp.
  • Spiral bits used for smoothly downcut groove and slots, Mortises, Cycles and dados leave with clean edge and top surface, better than straight bits.
  • The route bit suit for CNC router and Makita, Bosch, and any brand plunge router with 1/2” collet.
  • Industrial quality control to ensure best performance.
Check Stock

EANOSIC Upcut Spiral Router Bit 3-Flute with 1/2” Shank, Extra Long (4 inch), 1/2” Cutting Diameter, 2” Cutting Length, Carbide CNC Router Bits End Mill for Wood Mortises Carving Engraving

  • Up cut spiral router bit with 1/2 inch shank and 1/2 inch cutting diameter, 2 inch cutting length, 4 inch for total length.
  • PREMIUM QUALITY: The spiral upcut router bits Made of solid carbide (Tungsten steel), it is high-wearable and has a long life. You can decrease the times of changing cutters, save production time..
  • The CNC End Mill Router Bits apply to various wood: such as Plywood, OAK, MDF, and any hardwood working and Long service life for sharp. And also for carbon steel, soft alloy steel, tool steel, cast iron, aluminum alloy..
  • Spiral bits used for side milling, end milling, finish machining, etc. End Mill Bits can smoothly upcut groove and slots, Mortises, Cycles and dados with clean edge and bottom, better than straight bits..
  • The router bit suit for CNC router and any plunge routers with 1/2" collet..
Check Stock

OCGIG Large Spiral Groove Step Drill HSS Cone Bit Hole Cutter Stepped Up Unibit 6-60mm 12 Steps for Aluminium Metal Wood PVC

  • Material：HSS4241, High hardness, rustproof, solid and durable.
  • Split Point Tip：Increases cutting speed with self-centering and prevents walking.
  • Spiral Design：2 Flute spiral blade design makes the cutting faster and smoother, and automatically deburred from the hole when the drill bit is drilled.
  • Application：Suitable to cut holes in a variety of material like iron plate, aluminum plate, insulation boards, PVC sheet, ect.
  • Package includes：1 x 6-60mm HSS Groove Step Drill (12 Steps:6mm, 10mm, 15mm, 20mm, 25mm, 30mm, 35mm, 40mm, 45mm, 50mm, 55mm, 60mm).
Check Stock