Reviews Spiral Flute Tapered Chucking Reamer
7-Piece HSS Chucking Reamer Set, 1/8 Inch - 1/2 Inch
- Chucking Reamer: Size: 3mm, 4mm, 5mm, 6mm, 7mm, 8mm, 9mm, 10mm.
- tolerance: H7. Features just the base substrate without any additional coatings, good for wide ranges of applications.
- Material: High-speed steel tools are with combination of hardness and toughness for wear resistance, suitable for general purpose applications.
- Applications: Cut and remove the thin layer metal on hole surface that has been processed, mainly to improve the precision of holes and reduce the surface roughness.
- Features: Straight flute tools allow chips to collect in the flutes and can make shallow cuts in most applications.
- How to Use: Chucking reamers (machine reamers) are used on lathes, drill presses and screw machines. Designed for accurate reaming in stainless steel, aluminum, copper, alloy, plastic.
Check StockTTC .124 -.501 14 Pc Over/Under HSS Straight Flute RH Chucking Reamer Set
- Type- Straight Flute Chucking Reamer Bits.
- Application- Widely used for bore machining, installed in drilling machine, milling machine, etc.
- Processed surface of iron, plastic, wood, copper, aluminum and other soft materials.
- Quantity- 10 Pieces. Shank Diameter-3mm,4mm,5mm,6mm,7mm,8mm,9mm,10mm,11mm,12mm.
Check StockProlinemax 14 Pc 0.124-0.501\ HSS Chucking Reamer Set Straight Shank Flute Decimal Sizes
- Sizes: 0.124'' 0.126'', 0.1885'', 0.1865'', 0.251'', 0.249'', 0.3115'', 0.3135'', 0.374'', 0.376'', 0.4365'', 0.4385'', 0.499'', 0.501''.
- Wooden Case Overall Dimension: 9-3/4''L 8''W x 1-1/4''H *Estimate Only*.
Check Stockuxcell Chucking Reamer Set Lathe Machine Reamer Straight Flute Milling Cutter High Speed Steel H7 Tolerance (3mm 4mm 5mm 6mm 7mm 8mm 9mm 10mm 11mm 12mm) 10pcs
- 【High working efficiency】: This chucking machine reamer set has sharp cutting-edge, high efficiency cutting ability, high accuracy, so your work will become easier under the use of this tools set. Also, this set has a long-term using service life.
- 【High quality materials】: This set of cutter milling reamer is made of high quality and high speed steel materials, so these reamer cutters have high hardness.
- 【Specific and professional use】: This steel milling cutting tool set is designed for reaming to mold processing and handicraft processing.
- 【Wide using range】: This whole chucking reamer set can be widely used for bore machining, installed in drilling machine, milling machine, etc.
- 【Fine process】: This set of chucking reamer tools' surface has processed by iron, plastic, wood, copper, aluminum and other soft materials.
Check Stockuxcell 3/8\ 5/8\ 1/2\ 3/4\ Chucking Reamer H7 Accuracy High Speed Steel Lathe Machine Reamer 6 Straight Flutes Round Shank Milling Cutter Tool 4pcs
- Chucking Reamer: Size: 3mm, 4mm, 5mm, 6mm, 7mm, 8mm, 9mm, 10mm, 11mm, 12mm.
- tolerance: H7. Features just the base substrate without any additional coatings, good for wide ranges of applications.
- Material: High-speed steel tools are with combination of hardness and toughness for wear resistance, suitable for general purpose applications.
- Applications: Cut and remove the thin layer metal on hole surface that has been processed, mainly to improve the precision of holes and reduce the surface roughness.
- Features: Straight flute tools allow chips to collect in the flutes and can make shallow cuts in most applications.
- How to Use: Chucking reamers (machine reamers) are used on lathes, drill presses and screw machines. Designed for accurate reaming in stainless steel, aluminum, copper, alloy, plastic.
Check Stock5/8 Bridge Reamer Bridge/Construction Reamer 1/2 Shank M2 HSS Taper Chucking Reamer Bit Tool for Steel Metal Alloy Wood Plastic Drilling Hole
- Material: 5/8 bridge reamer is made of high-quality M2 HSS steel, with high toughness, high-temperature resistance, corrosion resistance and long service life. Compared to other commonly used low-grade high-speed steels, M2 has an increased content of tungsten and molybdenum, both key elements for improved durability.
- Wide Application: HSS bridge reamers can enlarge or align existing holes and are suitable for various materials such as aluminum, brass, bronze, cast iron, copper, iron, metal, nickel, plastic, steel and other structural materials Note: It requires existing holes Or a pilot hole is required.
- Size Infor: Length of chucking reamer is 6.5 inch.
- Safe to Use: Designed with helical flutes and safety stops to keep chips away from the operator. The safety collar stops to prevent over-penetration and loss of operator stability.
- Design: The tapered tip design allows the reamer to fit into unevenly overlapping holes, aligning the bolt holes. The 5/8" bridge reamer is not a drill, it just aligns the reamer with the pre-drilled hole.
Check Stock8pcs Reamer Set, HSS H8 Straight Shank Chucking Machine Cutter Milling Reamer Kit 3/4/5/6/7/8/9/10mm
- Type- Straight Flute Chucking Reamer Bits.
- Application- Widely used for bore machining, installed in drilling machine, milling machine, etc.
- Processed surface of iron, plastic, wood, copper, aluminum and other soft materials.
- Quantity- 10 Pieces. Shank Diameter-3mm,4mm,5mm,6mm,7mm,8mm,9mm,10mm,11mm,12mm.
Check StockBridge (Construction) Reamer 9/16\ Extra Long Magnetic
Check StockDrill America DWRRB15/16HEX - DWRRB-Series Bridge Reamer, Reamer Type: Bridge, Reamer Diameter: 15/16\
Check Stockuxcell Chucking Reamer Set Lathe Machine Reamer Straight Flute Milling Cutter High Speed Steel H8 Tolerance (2mm 3mm 4mm 5mm 6mm 7mm 8mm 9mm 10mm) 9pcs
- Chucking Reamer: Size: 2mm, 3mm, 4mm, 5mm, 6mm, 7mm, 8mm, 9mm, 10mm.
- tolerance: H8. Features just the base substrate without any additional coatings, good for wide ranges of applications.
- Material: High-speed steel tools are with combination of hardness and toughness for wear resistance, suitable for general purpose applications.
- Applications: Cut and remove the thin layer metal on hole surface that has been processed, mainly to improve the precision of holes and reduce the surface roughness.
- Features: Straight flute tools allow chips to collect in the flutes and can make shallow cuts in most applications.
- How to Use: Chucking reamers (machine reamers) are used on lathes, drill presses and screw machines. Designed for accurate reaming in stainless steel, aluminum, copper, alloy, plastic.
Check Stockuxcell Chucking Reamer Set Lathe Machine Reamer Straight Flute Milling Cutter High Speed Steel H8 Tolerance (3mm 4mm 5mm 6mm 7mm 8mm 9mm 10mm 11mm 12mm) 10pcs
- Chucking Reamer: Size: 3mm, 4mm, 5mm, 6mm, 7mm, 8mm, 9mm, 10mm, 11mm, 12mm.
- tolerance: H8. Features just the base substrate without any additional coatings, good for wide ranges of applications.
- Material: High-speed steel tools are with combination of hardness and toughness for wear resistance, suitable for general purpose applications.
- Applications: Cut and remove the thin layer metal on hole surface that has been processed, mainly to improve the precision of holes and reduce the surface roughness.
- Features: Straight flute tools allow chips to collect in the flutes and can make shallow cuts in most applications.
- How to Use: Chucking reamers (machine reamers) are used on lathes, drill presses and screw machines. Designed for accurate reaming in stainless steel, aluminum, copper, alloy, plastic.
Check StockReamer Set, 10Pcs HSS H7 Machine Cutter Straight Chucking Milling Reamer Kit, Reamer Metric, Milling Machine Cutter, Reamers for Metal 3mm 4mm 5mm 6mm 7mm 8mm 9mm 10mm 11mm 12mm
- 0.196" diameter (+.0003"/-0") carbide tipped chucking reamer.
- 1 1/8" length of flute with 1/2" carbide length.
Check StockViking Drill and Tool 12270 CR-4SP 4 piece Set Type 50-UB Standard Flute Magnum Super Premium Car Reamer
- 4 pc. Set Premium High Speed Steel Car Reamer Standard Flute 3-Flats on Shank.
- Includes: 3/8, 1/2, 5/8, 3/4 straight flute reamer.
- Reamers designed for enlarging previously formed or drilled holes.
- 4 pc. Set, HSS Car Reamer Standard Flute 3-Flats on Shank.
Check Stock