Reviews Specialty Tool Tray

Ice Cube Trays for Freezer 3 Pack - Mini Ice Cube Trays with Lid & Easy-Release Silicone Bottom, Stackable Small Ice Cube Molds

  • NICE SMALL ICE CUBE TRAYS: A must-have mini tiny ice tray, make ice once and run out once. After the ice tray cover is opened, the ice cubes placed in the refrigerator twice will be polluted by air, so it is recommended to use a mini ice tray.This set includes 3 mini ice trays for a total of 18 cubes. .
  • EASY TO USE: These small trays make a single glass of ice which work well when only 1-2 people live together and don’t want a full size ice tray or ice maker. Easy to use!.
  • LIFE SAVER: With the lids they’re stackable and don’t spill, unless you really slosh it around. The bottom of each cube hole is silicone. If you twist the tray, they pop right out..
  • EASY ICE RELEASE: Gently press the silicone at the bottom with your hand to release the ice cube easily, Let the ice cube tray sit out for a few minutes they are easier to get out. Under the water tap to wash after use, also can be washed by dishwasher..
  • A MUST-HAVE KITCHEN TOOL: The Stackable specialty kitchen tools save your kitchen room, buy it now and chill tomorrow!.
Check Stock

Elite Platinum ECT-200X Maxi-Matic 2-Slice Toaster, Brushed Stainless Steel

  • Cancel option, Bagel, Reheat and Defrost settings with LED indicators.
  • Advanced Toast Technology features self-centering guides for even toasting.
  • 2 extra wide slots for bagels and specialty breads with five adjustable toast shade settings.
  • Removable crumb tray for fast & easy clean up.
  • Cancel option, bagel, reheat and defrost settings with LED indicators.
  • 2 Extra wide slots for bagels and specialty breads.
Check Stock

iPhone Compatible Sim Card Tray Removal Tool (Pack of 10) | Sim Card Pin | Sim Card Tool Compatible with iPhone X, 8, 7, 6, iPads, Samsung Note 9, 8, S9, S8, S7 / Sony, Huawei, HTC & all smartphones

  • ✅ The sim pin makes a GOOD sim card eject tool REPLACeMENT. The sim card tray eject pin is a SUBSTITUTE for any LOST sim card EJECT TOOL. Sim tool GUARANTEES the EFFICIENT REMOVAL of the SIM from its tray. This sim opening tool OPENS and EJECTS the SIM card tray on your devices. This sim card ejector and sim card eject tool works for all Apple iPhone X, 8+, 8, 7, 7+, 6+, 6S, 6S+, 6, SE, sim eject tool iPhone 5, 5C, 5S, sim card eject tool iPhone 4S, 4, sim card eject tool for iPad/iPod series..
  • ✅ It is not easy to eject iPhone sim card without tool to use so, the sim extractor pin from Mobi Lock is the answer! The sim card eject pin for iPhone is EASY TO USE. To use this sim eject tool, just insert the straight end of the sim removal tool into the hole next to the SIM port and remove your SIM card from the tray. Furthermore, this Mobi Lock sim eject pin and sim card remover is known for its versatility because this pin also WORKS with OTHER SMARTPHONES of SIMILAR SIZE eject trays..
  • ✅ Mobi lock is dedicated in creating quality sim extractors. This sim card eject keys are well designed to ENSURE that this sim eject tool is NOT EASILY BENT or BROKEN. This iPhone sim card tray open eject pin is made using a fine metal alloy. Although these sim c....
Check Stock

Specialty Archery Verifier 1/4 in. No. 8

  • Specialty Archery - PXL Hunter Peep Aperture- 1/4. The most advanced peep system in the archery industry, completely designed for ultimate accuracy..
  • CST – Center String Technology – PXL Capture Aperture located on center of bowstring – no L and R misses. OCT – Optical Centered Technology – Improved centration of lenses for ultimate accuracy. PLT – Protected Lens Technology – Lenses protected by plastic on 2 sides prevents cracking..
  • DSAT – Dual String Angle technology – has both 37 and 45-degree string angles on the same peep housing. TAP – Tool-less Aperture Technology – Knurled Tool-less PXL Capture Aperture – eliminates the need for an aperture wrench..
  • NOTE: PXL Hunter Peep Apertures, PXL Hunter Peep Clarifiers, and PXL Hunter Peep Verifiers fit into Specialty Archery PXL Hunter Peep ONLY. NOT compatible with other Specialty Archery peeps..
  • PXL Hunter Peep and component weights: PXL Hunter Peep – 30.5 grains. PXL Hunter Peep Capture Aperture – 7.5 grains. PXL Hunter Peep Clarifiers/Verifiers – 3.5 grains. PXL Hunter Peep Shade Cap – 3.0 grains..
Check Stock

ABN Flexible Tool Tray - Silicone Rubber Tools Organizer, Non Slip Tool Holder Tray for Organizing Parts, 10in x 9in

  • [Organize Your Tools]: Whether you are performing maintenance on your vehicle or crafting a DIY project, use the ABN Orange Rubber Tool Tray Flexible Non Slip Tool Tray to hold parts and tools for you.
  • Use this silicone tool tray for your workshop and garage.
  • [No More Slippage]: Save time and energy using this parts tray to prevent the dropping of your parts and tools.
  • Non-slip smooth backing of tool tray holder allows you to place holder on curved or slanted surfaces.
  • Ridges in center compartment keep tools in place.
  • [Sections for Your Tools]: Keep your tools and small parts on hand while you work on your vehicle or are woodworking.
  • Flexible nonslip tool holder has space to hold your wrenches, nails, sockets, screws, and more in the included 4 notches, 2 large pockets, 3 small pockets, 5 socket holes.
  • [Flexible Silicone Rubber]: No need to worry about this non slip flexible tool organizer falling apart after extended, repeated use.
  • Silicone parts tray allows for the easy cleanup of grime, dirt, and oil.
  • [Perfect Size]: Silicone tool tray measures 10 x 9 x 1 inches (26 x 22 x 2cm).
  • Set rubber work tray in your toolbox, your car's engine compartment, or even the wing of your plane.
  • Package includes 1 flexible non slip tool holder for your workshop.
Check Stock

HP LaserJet P2055d Printer (CE457A)

  • Adjustable 50-sheet multipurpose input tray 1 for specialty pape.
  • 128 MB of memory and a 600 MHz processor perform complex tasks quickly.
Check Stock

ABN Flexible Tool Tray, 3pk - Silicone Rubber Tools Organizer, Non Slip Tool Holder Tray for Organizing Parts, 3 Sizes

  • [Organize Your Tools]: Whether you are performing maintenance on your vehicle or crafting a DIY project, use the ABN Orange Rubber Tool Tray Flexible Non Slip Tool Tray 3 Pack to hold parts and tools for you.
  • Use each silicone tool tray for your workshop and garage.
  • [No More Slippage]: Save time and energy using these parts tray containers to prevent the dropping of your parts and tools.
  • Non-slip smooth backing of tool tray holder allows you to place holder on curved or slanted surfaces.
  • [Sections for Your Tools]: Keep your tools and small parts on hand while you work on your vehicle or are woodworking.
  • Each flexible nonslip tool holder has space to hold your wrenches, nails, sockets, screws, and more in the included variety of pockets, notches, holes, and ridges for your tools and parts.
  • [Flexible Silicone Rubber]: No need to worry about these non slip flexible tool organizer caddies falling apart after extended, repeated use.
  • Silicone parts tray allows for the easy cleanup of grime, dirt, and oil.
  • [Perfect Size]: Set rubber work tray in your toolbox, your car's engine compartment, or even the wing of your plane.
  • Package includes 3 flexible non slip tool mats.
  • Mats included measure 10.5 x 5.5, 10 x 9, and 21 x 14 inches (26 x 13, 25 x 22, 53 x 35cm).
Check Stock

OEMTOOLS 25556 Flywheel Turner, Flexplate Tool, Flywheel Wrench, Sure Grip Flywheel Turning Tool, Flywheels Specialty Tools, Engine Rotating Tool

  • SIMPLE REMOVAL TOOL: Our flywheel locking tool grabs the teeth of your flywheel or flexplate providing torque to quickly remove or install the car flywheel or flexplate.
  • Our turner helps you apply proper torque to nuts during flywheel installation.
  • COMPLETE ENGINE ACCESS: Sometimes it takes a specialty tool to get all of your engine work done efficiently.
  • This flywheel removal tool will remove flexplates and flywheels so that you can service clutches, transmission, and rotate the crackshaft.
  • FLYWHEEL HOLDER: Removing your flywheel bolt or torquing the harmonic balancer bolts can be a nightmare without a flywheel key.
  • Lock your car’s flywheel sprocket or flexplate in position to get adequate nut torque for removal and installation jobs.
  • COMFORTABLE FLYWHEEL PULLER: Working beneath your vehicle is uncomfortable.
  • Let this flywheel turning wrench’s sure grip handle keep you locked on the flywheel teeth without hand slippage during torquing.
  • This flywheel tool folds for easy storage.
  • SPECIALTY WORKING TOOL: Other tools can’t handle the pressure of removing your flywheel.
  • Our spring tensioned flywheel remover keeps your flywheel turning wrench securely engaged while torquing the harmonic and car flywheel bolts.
Check Stock

Rabbit Clear Ice Cube Tray

  • This specialty ice tray makes 4 large crystal clear ice cubes, perfect for whiskey or scotch on the rocks.
  • Ice cubes are packed densely to melt slower than regular ice cubes, keeping your drink colder and stronger for longer.
  • An insulated base freezes ice from top to bottom, removing bubbles and impurities that make normal ice look cloudy.
  • Simply fill the blue silicone molds will tap water, freeze, and enjoy with your favorite cocktail or beverage.
  • The plastic ice tray insert is easily removable for quick and hassle-free cleaning.
Check Stock

Tool Sorter Pliers Organizer – Black

  • ROLLING TRAY: Our rolling trays keep your tools handy wherever you're working.
  • These tray tables are ideal tools for mechanics.
  • ADJUSTABLE HEIGHT: Portable tool tray is adjustable from 33.5 inches to 49.2 inches.
  • Features an EVA foam work surface (29 inches x 20 inches) with three built in small parts / tool organizers.
  • DURABLE FINISH: Portable work table features rubber bumper corners to prevent scratching to vehicles as the mechanics table is moved around your workspace, and a durable powder coated finish for additional longevity.
  • ALL STEEL CONSTRUCTION: Tool tray cart features an all steel construction that will help it stand up to challenging shop environments.
  • Durability, organization, portability, everything you could want in a mechanic's work table.
  • BUILT TO LAST: With an all-steel body, four rugged casters, a powder-coat finish, EVA foam work space, and high-quality welds, this mechanic tool tray is built to last.
Check Stock

Breville Duo Temp Pro Espresso Machine, Stainless Steel, BES810BSS

  • The Breville Duo Temp Pro lets you create third wave specialty coffee at home.
  • This espresso machine ensures balanced flavors from even extraction using low pressure pre-fusion, managing sweetness, acidity and bitterness for the perfect cup every time.
  • PRECISE ESPRESSO EXTRACTION: Low pressure pre-infusion helps ensure all the flavors are drawn out evenly during the extraction for a balanced tasting cup.
  • WATER TEMPERATURE: The 1600W Thermocoil–Integrated stainless steel water path accurately controls water temperature.
  • MANUAL MICROFOAM MILK TEXTURING: A high power 1600W element delivers sufficient steam to create microfoam that enhances flavor and enables you to produce latte art at home.
  • AUTO PURGE: The Duo-Temp Pro Espresso Machine automatically purges the heat system after steaming, ensuring your next espresso is extracted at the right temperature.
  • MAINTENANCE INDICATOR: Espresso Machine that lets you know when it needs a clean.
  • The cleaning and drip tray alerts make routine maintenance low-maintenance.
  • INCLUDED ACCESSORIES: Razor Dose Trimming Tool, 1 cup & 2 cup Single & Dual Wall Filter Baskets, Stainless Steel Milk Jug, Allen Key, Water Filter Holder and Water Filter.
  • WARRANTY: 1 Year Limited Product Warranty.
Check Stock

Metaltech CISTR Jobsite Series 6' Baker Tool Tray

  • UNCLUTTER YOUR TOOLBOX DRAWER – The Compact Tool Sorter Pliers Organizer holds up to 11 pliers. It helps unclutter your toolbox and create more room for even more tools.
  • ORGANIZE YOUR TOOLS – Tool Sorter Pliers Tray organizes your tool chest. Tools are easily visible and your tool box drawer will look clean and organized.
  • RECLAIM SPACE – The compact Tool Sorter Pliers Tray saves tons of space, creating more room for even more tools. Tray measures 13 x 10 x 1.25 inches.
  • STORE A VARIETY OF TOOLS – Tool Caddy holds a variety of tools, including adjustable wrenches, metal files, chisels, etc. Graduated compartments and open end give flexibility for tools of varying dimensions.
  • MADE IN THE USA – All Tool Sorter Organizers are tough built right here in the USA.
Check Stock

Tool Sorter Screwdriver Organizer – Black

  • ✅ SCREWDRIVERS ORGANIZED – This screwdriver tray organizes your screwdrivers in a logical way. Quickly and easily find the right tool. No more rifling through your tool drawer looking for the right tool.
  • ✅ CLEARLY SEE EACH SCREWDRIVER – This screwdriver organizer gives you easy identification without confusion over type and size. Each tool has its spot and you will see clearly if a tool is missing.
  • ✅ UNCLUTTER YOUR TOOLBOX DRAWER – The Compact Tool Sorter screwdriver tray holds up to 16 screwdrivers. It helps unclutter your toolbox and create more room for even more tools.
  • ✅ FITS MOST TOOLBOX DRAWERS – Low profile tray fits even shallow drawers giving you greater flexibility. Measures 13" x 10" x 1".
  • ✅ BUILT TOUGH IN USA – All Tool Sorter products are made of the highest quality materials and crafted right here in the USA. They will stand up to your projects.
Check Stock