Reviews Special Steels

Champion Cutting Tool Heavy Duty Spiral Point Tap:XL22-5/16-18-Made in USA (12 per pack)

  • Heavy Duty Spiral Point Taps thread quickly, accurately, and last longer when tapping steel and other tough alloys. Made in USA.
  • Ideal for through holes applications since spiral point quickly shears and ejects chips ahead of the tap.
  • Special necked design for deeper, trouble free tapping and less tap breakage. Surface treated premium high speed steel for longer tool life..
  • For tapping all through hole applications in low and high carbon steel, stainless steel, alloyed steels, steel drop forgings, grey cast iron, titanium, nimonic alloys, manganese, sprint steels, and other tough alloys.
Check Stock

Champion Cutting Tool Heavy Duty Spiral Point Tap:XL22-3/8-16-Made in USA (12 per pack)

  • Heavy Duty Spiral Point Taps thread quickly, accurately, and last longer when tapping steel and other tough alloys. Made in USA.
  • Ideal for through holes applications since spiral point quickly shears and ejects chips ahead of the tap.
  • Special necked design for deeper, trouble free tapping and less tap breakage. Surface treated premium high speed steel for longer tool life..
  • For tapping all through hole applications in low and high carbon steel, stainless steel, alloyed steels, steel drop forgings, grey cast iron, titanium, nimonic alloys, manganese, sprint steels, and other tough alloys.
Check Stock

US Forge Welding Electrode E6011 1/8-Inch by 14-Inch 10-Pound Box #51134

  • Cold rolled steels, or other steels containing high sulfur or selenium.
  • Low alloy and mild steels when stress relieveing normally would be required but cannot be done.
Check Stock

JET Bi-Metal Bandsaw Blade, 3/4\ x .035\ x 93\ x 6-10VT (414304)

  • REPLACEMENT BLADE FOR JET 7" x 12" HORIZONTAL BANDSAWS.
  • COMPATIBILITY: Fits HVBS-7MW, J-3410, HVBS-710G/S, and HBS-812G..
  • VERSATILE CUTTING: Bi-Metal bandsaw blades are great for metal cutting (i.e., carbon steels, light alloy steels, mold steels, and tool steels)..
Check Stock

Professional Knife Steel Magnetized for Safety Our Honing Rod Has an Oval Handle for a Firm Grip Honing Steel Built For Daily Use Perfect for Chefs and Home Cooks! 10 3 Stripe

  • MAGNETIZED FOR SAFETY: While honing steels (sometimes referred to as sharpening steels) realign your knife’s edge for a sharper cut, they can also....
  • BUILT TO LAST THROUGH YEARS OF USE: Our honing steels are made of high quality, hardened carbon steel. Every material in our honing rods was....
  • NO RUSTING: Once hardened, our honing steels go through our proprietary chromium plating process, which prevents rust and corrosion..
  • RETAINS MORE METAL ON YOUR KNIFE EDGE: Honing steels are designed to be used often, but without taking off too much of your knife’s edge metal. This....
  • DISHWASHER SAFE: While it is not necessary to wash honing steels after each use, it is recommended you wipe the stropping steel down with a wet cloth....
Check Stock

Professional Knife Steel Magnetized for Safety Our Honing Rod Has an Oval Handle for a Firm Grip and is Built For Daily Use Perfect for Chefs and Home Cooks Alike! 10 Luxury

  • MAGNETIZED FOR SAFETY: While honing steels (sometimes referred to as sharpening steels) realign your knife’s edge for a sharper cut, they can also....
  • BUILT TO LAST THROUGH YEARS OF USE: Our honing steels are made of high quality, hardened carbon steel. Every material in our honing rods was....
  • NO RUSTING: Once hardened, our honing steels go through our proprietary chromium plating process, which prevents rust and corrosion..
  • RETAINS MORE METAL ON YOUR KNIFE EDGE: Honing steels are designed to be used often, but without taking off too much of your knife’s edge metal. This....
  • DISHWASHER SAFE: While it is not necessary to wash honing steels after each use, it is recommended you wipe the stropping steel down with a wet cloth....
Check Stock

Professional Knife Steel Magnetized for Safety Our Honing Rod Has an Oval Handle for a Firm Grip and is Built For Daily Use Perfect for Chefs and Home Cooks Alike! 12 3 Stripe

  • MAGNETIZED FOR SAFETY: While honing steels (sometimes referred to as sharpening steels) realign your knife’s edge for a sharper cut, they can also....
  • BUILT TO LAST THROUGH YEARS OF USE: Our honing steels are made of high quality, hardened carbon steel. Every material in our honing rods was....
  • NO RUSTING: Once hardened, our honing steels go through our proprietary chromium plating process, which prevents rust and corrosion..
  • RETAINS MORE METAL ON YOUR KNIFE EDGE: Honing steels are designed to be used often, but without taking off too much of your knife’s edge metal. This....
  • DISHWASHER SAFE: While it is not necessary to wash honing steels after each use, it is recommended you wipe the stropping steel down with a wet cloth....
Check Stock

E7018 3/32\ 1/8\ 5/32\ Premium Arc Welding Rods Carbon Steel Electrode 60 lb (10 lb x 6-pks) (1/8\ 60 lbs)

  • Cold rolled steels, or other steels containing high sulfur or selenium.
  • Low alloy and mild steels when stress relieveing normally would be required but cannot be done.
Check Stock

Professional Knife Steel Magnetized for Safety. Our Honing Rod Has an Oval Handle for a Firm Grip and is Built For Daily Use, Perfect for Chefs and Home Cooks Alike! (10', 3 Dot)

  • MAGNETIZED FOR SAFETY: While honing steels (sometimes referred to as sharpening steels) realign your knife’s edge for a sharper cut, they can also cause tiny metal particles from your blade to become airborne. Our honing rods are magnetized to prevent those particles from being inhaled or landing on nearby food..
  • BUILT TO LAST THROUGH YEARS OF USE: Our honing steels are made of high quality, hardened carbon steel. Every material in our honing rods was meticulously chosen. You won’t find cheap plastic handles or soft, inexpensive steel. When you hold it, the weight immediately reveals how solid the construction is, and the design adds class to any kitchen..
  • NO RUSTING: Once hardened, our honing steels go through our proprietary chromium plating process, which prevents rust and corrosion..
  • RETAINS MORE METAL ON YOUR KNIFE EDGE: Honing steels are designed to be used often, but without taking off too much of your knife’s edge metal. This is contrary to knife sharpening steels or wet stone sharpeners, which should be used sparingly. (More details in product description.).
  • DISHWASHER SAFE: While it is not necessary to wash honing steels after each use, it is recommended you wipe the stropping steel down with a wet cloth to remove the metal particles. For....
Check Stock

EZARC Carbide Reciprocating Saw Blade R678HM Endurance for Thick Metal, Cast Iron, Alloy Steel 6-Inch 8TPI, 3-Pack

  • [Carbide Technology] Up to 50x longer life than bi-metal reciprocating saw blades.
  • [Heavy Metal Application] 8 teeth per inch teeth design is ideal for cutting all kinds of metal in tough applications, e.g. high-alloy construction steels, stainless steels, rebar and car beams.
  • [Ultimate cutting performance] Easy to cut advanced materials where bi-metal blades fail quickly, such as stainless steels, high-alloy steels or hardened steels..
  • [Design for Toughest Materials] Each carbide tooth is precision ground and individually welded, provides ultimate flexibility and impact strength needed for heavy duty demolition work.
  • [Blade Dimension] 6-inch 8 TPI metal cutting (3/16 in. -1/2 in. ), 1/2inch universal shank fits all major sawzall saws such as Bosch, Milwaukee, Black&Decker, Hitachi, Makita, Metabo, Dewalt, Porter Cable, Skil, Rockwell etc..
Check Stock

SPEED TIGER ITBTA Carbide Tapered End Mill- CNC Carving Bits, Ball Tip R0.5, 1/4\Shank 3\OVL for Wood/Alloy Steels/Hardened Steels-Made in Taiwan

  • GENERAL APPLICATION CUTTER - Speed Tiger carbide tools excel at working wood, aluminum, copper, carbon steels (~HB225), alloy steels (HB225~325), pre-hardened steels (up to HRC45), hardened Steels (HRC40~45), cast iron.
  • Tip Radius: 0.5mm, Cutting Length: 1-1/4.
Check Stock

SPEED TIGER ICSM Chamfer End Mill - CNC Carving Bits, V Groove, 60 Degree, 1/4\Shank 2\OVL for Wood/Alloy Steels/Hardened Steels-Made in Taiwan(1 Piece, 60 Degree)

  • GENERAL APPLICATION CUTTER - Speed Tiger carbide tools excel at working wood, aluminum, copper, MDF, carbon steels (~HB225), alloy steels (HB225~325), pre-hardened steels (up to HRC45), hardened Steels (HRC40~45), cast iron.
  • Ideal for Chamfering, Carving V Groove, Centering.
Check Stock

Forney 30810 Welding Rod, 1/8-Inch

  • All position welding, low hydrogen rod for general purpose AC applications requiring low penetration, can also be used on DC+.
  • Designed for welding head enable steels and projects involving hard to weld steels including thick sections and restrained joints with cracking issues.
  • Not recommended for use with low open circuit-Voltage OCV power sources.
  • Excellent for tack welds and out of position welding.
  • Ideal for general fabrication of cold roll steels.
Check Stock