Reviews Spec D Exhaust Brz

DBA 98-06 WRX Upgrade to STi Calipers w/ Standard 170mm Handbrake Rear Slotted 4000 Series Rotors Pair

  • DBA 12+ Compatible with Subaru/Compatible with Scion BRZ/FR-S (AU Spec) 10 Lug Slot Rear Drilled & Slotted 4000 Series Rotor.
  • 4000 Series Rotor - Cross Drilled/Slotted Uni-Directional Rotor.
Check Stock

PQY Billet Power Block Intake Manifold Spacer Compatible with 13+ Subaru BRZ 13-16 Scion FR-S 17+ Toyota 86 FA20 Engine 19hp / 15tq Black

  • ✿WOKR EXCELLENT:The lengthened intake runners enhance the volumetric efficiency of the engine which translated into an increase of 19 Horse Power, 15 Pound Feet of torque and narrowed up the torque dip by 300RP M on a totally stock BRZ..
  • ✿WHAT YOU GET: In this kit, you will find 2 BPB, 4 Delrin O-rings, 11 mounting bolts, 1 nut, 4 fuel rail shield risers, and 1 support bracket for the direct injection control unit.(as the picture shows).
  • ✿CHEAPER BUT SURDY: Made of high quality aluminum,textured and durable,it can also works with any aftermarket tune, exhaust and intake components..
  • ✿EASY TO INSTALL:The billet power block kit makes it a complete bolt on system which can be installed in under 30 min..
  • ✿COMPATIBLE WITH CAR MODEL:13+ Subaru BRZ 13-16 Scion FR-S 17+ Toyota 86 FA20 Engine..
Check Stock

Subaru Exhaust Manifold Stud & Nut Kit WRX STI Legacy Impreza Forester Crosstrek Outback Brz 800910550 902370029 Genuine Oem

  • Stud 800910550 X6 (10x41) Nut 902370029 x6.
  • 1990-2018 Legacy and Outback 1993-2018 IMPREZA 1998-2018 Forester.
  • 2002-2018 WRX 2004-2018 STI 2013-2019 CROSSTREK 2003-2006 Baja.
  • 2013-2019 brz 2006-2013 Tribeca 1992-1997 svx.
Check Stock

Mutazu Performance Axle-Back Exhaust Muffler For Mazda Miata NB 1999-2005 T-304 (CBE-043A)

  • Made of High Quality T-304 Stainless Steel with Computerized Mandrel-Bends for Strength and Durability.
  • i.e. Maximizing Smoothest High Exhaust Air Flow Rate / High Performance Racing Spec. Design.
  • Instantly Increases Horsepower/ Low End Torque / TIG Welded CNC Machine Flange for Resistance against Pressure and Corrosion.
  • Aggressive Deep Sound while Ensures Smooth Exhaust Gas Flow / Fitments: 1999-2005 Mazda Miata NB with 1.8 litter Engine.
  • Muffler Exhaust Tips: 3.5" Round / Piping Inlet Size: 2.5" OD.
Check Stock

Mutazu Stainless Steel Aggressive Axle-Back Exhaust Muffler For Mazda Miata NB 1999-2005 Longitude mounting (MX3-023)

  • Made of High Quality T-304 Stainless Steel with Computerized Mandrel-Bends for Strength and Durability.
  • i.e. Maximizing Smoothest High Exhaust Air Flow Rate / High Performance Racing Spec. Design.
  • Instantly Increases Horsepower/ Low End Torque / TIG Welded CNC Machine Flange for Resistance against Pressure and Corrosion.
  • Removable baffle / Aggressive Deep Sound while Ensures Smooth Exhaust Gas Flow / Fitments: 1999-2005 Mazda Miata NB with 1.8 litter Engine.
  • Muffler Exhaust Tips: 4" Round, Piping Inlet Size: 2.5" OD.
Check Stock

Replacement For Toyota 86 /for Scion FR-S/Compatible For Subaru BRZ 2013 2014 2015 2016 2017 2018 2019 2020 Euro-Spec Flip Open Arm Rest - Black PVC Leather w/Red Stitching Replace # PZ435-10340-00

  • Compatible For Toyota 86 /Compatible For Scion FR-S/Compatible For Subaru BRZ 2013 2014 2015 2016 2017 2018 2019 2020, For Left Hand Drive Models Only.
  • Replacement OEM ( Original Equipment Part) Number: PZ435-10340-00,PZ4351034000.
  • Full Black leather with custom RED stitch. Matches Interior materials. Includes mounting hardware.
  • This is the Euro-spec version that flips open/closed for an added hidden storage area underneath!.
  • Vehicle Tested. Perfect Fit. 1 Year Manufacturer Warranty.
Check Stock

12 Pack M16 Engine Oil Drain Plug Sealing Washers/Crush Gaskets 803916010 Fit Replacement for Subaru Outback Crosstrek Forester WRX BRZ Impreza Engine Oil Seals Rings Silver

  • Made to specific sizes and standards to ensure a proper fit/Designed and constructed to strict engineering quality standards.
  • Direct replacement gaskets and some universal gaskets available. Proper fit with the drain plug ensures a tight seal.
  • Easy to install, save your money. Leak free, great value for 12 pack. Spec: ID 16mm/ OD 21mm/ Thickness 2.5 mm.
  • This 16 mm / 0.63 inch oil drain plug gaskets crush washers is needed for every oil change, it helps to seal the drain plug and oil pan surfaces.
  • This oil drain plug gaskets crush washers is for Subaru Outback Legacy Impreza Forester BRZ XV Crosstrek, see more vehicle details in the description part.
Check Stock

HPS Performance 316 Marine Stainless Steel T-Bolt Hose Clamp, fit 1-1/8\ ID hose, Range: 1.38\ - 1.57\ (316-SSTC-35-40)

  • 100% marine grade 316 stainless steel band, bolt and nut. High strength superior welded construction..
  • Perform well in saltwater applications and offer better corrosion resistance than 304 T-bolt band clamp. Meets or exceeds SAE Spec. J1508 for T-Bolt clamps..
  • Effective range: 1. 38" - 1. 57" (35mm-40mm).
  • Rolled edges to protect soft hoses. 3/4 inch (19mm) band width..
  • Maximum Torque Spec 75 in. lbs. Recommend to use two clamps for wet exhaust application..
Check Stock

HPS Performance 316 Marine Stainless Steel T-Bolt Hose Clamp, fit 1.25\ ID Hose, Range: 1.5\ - 1.69\ (316-SSTC-38-43)

  • 100% marine grade 316 stainless steel band, bolt and nut. High strength superior welded construction..
  • Perform well in saltwater applications and offer better corrosion resistance than 304 T-bolt band clamp. Meets or exceeds SAE Spec. J1508 for T-Bolt clamps..
  • Effective range: 1. 5" - 1. 69" (38mm-43mm).
  • Floating bridge and rolled edges to protect soft hoses. 3/4 inch (19mm) band width..
  • Maximum Torque Spec 75 in. lbs. Recommend to use two clamps for wet exhaust application..
Check Stock

HPS Performance 316 Marine Stainless Steel T-Bolt Hose Clamp Size # 196, fit 6.75\ ID Hose, Range: 7\ - 7.31\ (316-SSTC-178-186)

  • 100% marine grade 316 stainless steel band, bolt and nut. High strength superior welded construction..
  • Perform well in saltwater applications and offer better corrosion resistance than 304 T-bolt band clamp. Meets or exceeds SAE Spec. J1508 for T-Bolt clamps..
  • Effective range: 7" - 7. 31" (178mm-186mm). SAE # 196..
  • Floating bridge and rolled edges to protect soft hoses. 3/4 inch (19mm) band width..
  • Maximum Torque Spec 75 in. lbs. Recommend to use two clamps for wet exhaust application..
Check Stock

HPS Performance 316 Marine Stainless Steel T-Bolt Hose Clamp Size # 68, fit 2.75\ ID Hose, Range: 3\ - 3.31\ (316-SSTC-76-84)

  • 100% marine grade 316 stainless steel band, bolt and nut. High strength superior welded construction..
  • Perform well in saltwater applications and offer better corrosion resistance than 304 T-bolt band clamp. Meets or exceeds SAE Spec. J1508 for T-Bolt clamps..
  • Effective range: 3" - 3. 31" (76mm-84mm). SAE # 68..
  • Floating bridge and rolled edges to protect soft hoses. 3/4 inch (19mm) band width..
  • Maximum Torque Spec 75 in. lbs. Recommend to use two clamps for wet exhaust application..
Check Stock

HPS Performance 316 Marine Stainless Steel T-Bolt Hose Clamp Size # 108, fit 4\ ID Hose, Range: 4.25\ - 4.57\ (316-SSTC-108-116)

  • 100% marine grade 316 stainless steel band, bolt and nut. High strength superior welded construction..
  • Perform well in saltwater applications and offer better corrosion resistance than 304 T-bolt band clamp. Meets or exceeds SAE Spec. J1508 for T-Bolt clamps..
  • Effective range: 4. 25" - 4. 57" (108mm-116mm). SAE # 108..
  • Floating bridge and rolled edges to protect soft hoses. 3/4 inch (19mm) band width..
  • Maximum Torque Spec 75 in. lbs. Recommend to use two clamps for wet exhaust application..
Check Stock

HPS Performance 316 Marine Stainless Steel T-Bolt Hose Clamp Size # 188, fit 6.5\ ID Hose, Range: 6.75\ - 7.06\ (316-SSTC-172-180)

  • 100% marine grade 316 stainless steel band, bolt and nut. High strength superior welded construction..
  • Perform well in saltwater applications and offer better corrosion resistance than 304 T-bolt band clamp. Meets or exceeds SAE Spec. J1508 for T-Bolt clamps..
  • Effective range: 6. 75" - 7. 06" (172mm-180mm). SAE # 188..
  • Floating bridge and rolled edges to protect soft hoses. 3/4 inch (19mm) band width..
  • Maximum Torque Spec 75 in. lbs. Recommend to use two clamps for wet exhaust application..
Check Stock