Reviews Solvent System

3M PPS Mix Ratio Insert - Generic, 16067, 3 oz, 10 inserts per pack

  • Mix ratio inserts assist in the measuring process with 3M PPS (Legacy) paint preparation system.
  • 3M PPS is an allinone disposable solution for measuring, mixing, filtering, and spraying of paint materials.
  • System enables the painter the ability to consistently spray at 90° to the part, no matter the part orientation (even upside down).
  • The allinone solution reduces the chance of outside contamination and reduces paint consumption.
  • PPS reduces cleaning solvent consumption by up to 70% and reduces prep and cleanup time by up to 50%.
  • System delivers improved quality, lower material cost, less solvent consumption, improved productivity, less mess and easier use.
Check Stock

Welch Vacuum 142606 GelMaster Gel Dryer, 220V with UK Plug

  • Gel-drying vacuum system for laboratory applications.
  • Replaces the use of dry ice for convenience.
  • 1.5-liter tank with bottom drain for solvent.
  • Accepts 220V, 50Hz input power, United Kingdom (UK) plug.
Check Stock

SKB 6U iSeries Injection Molded Fly Rack-13 Mixer Accessory (3i-2317M146U)

  • SKB series Injection molded mil-standard waterproof cases are molded of Ultra high-strength polypropylene copolymer resin, featuring a gasket-sealed, water and dust tight, submersible design (MIL-C-4150J/ IP67). limited Lifetime.
  • Standard features include a molded-in hinge, patented trigger release latch system, comfortable, snap-down rubber over-molded cushion grip handle, automatic ambient pressure equalization valve (MIL-STD-648C), and resistance to UV, solvent, corrosion, and impact damage (MIL-STD-810F).
  • 6U removable Injection molded shock Rack cage, 13 inch rack depth, interior foam protection, Ultra high-strength polypropylene copolymer resin case construction, UV, solvent, corrosion and resistant (MIL-STD-810F).
  • Complete Gasket seal makes these cases absolutely watertight (MIL-STD-C-4150J), automatic ambient pressure equalization value (MIL-STD-648C & IP67).
  • Molded-in hinges, TSA acceptable trigger release latch system, rubber over-molded cushion grip handles, locking loops to accommodate a customer supplied lock.
Check Stock

Zep Dyna-Trap Filter Bag (Pack of 2) 903402 - Industrial Strength Solvent Part Washer Filter Bag

  • Intended for use in a continuous waste-minimizing program, not as a remedy for a badly contaminated system..
  • Selectively removes 1/2 to 1-1/2 quarts motor oil (depending on oil type) from dirty solvent.
  • Contains the same amount of filter media as the Dyna Reclaim Element.
  • Designed to trap and contain particulate matter. Limited amounts of greases and oils are removed from solvent as fluid percolates through the filter medium..
Check Stock

West System 105A Epoxy Resin (32 fl oz) Bundle with 206A Slow Epoxy Hardener (7 fl oz) and 300 Mini Pumps Epoxy Metering 3-Pack Pump Set (3 Items)

  • ...is a versatile low-viscosity epoxy system. It is used for boat building, composite construction and repairs that require high-strength, waterproof coating, bonding, and filling. It readily wets out fabrics and porous materials, and is easily modified for a wide range of working conditions and applications.
  • NO STRONG SOLVENT ODOR: 105 Epoxy Resin is formulated without volatile solvents and does not shrink after curing. It has a relatively high flash point and no strong solvent odor, making it safer to work with than polyester or vinylester resins. Resin viscosity is approximately 1000 centipoise (cP) at 72-degree-F (22-degree-C).
  • FIVE-PART RESIN TO ONE-PART HARDENER RATIO: When combined with 105 Resin in a five-part epoxy resin to one-part hardener ratio, this cured resin/206 Slow Hardener mixture yields a rigid, high-strength, moisture-resistant solid with excellent bonding and barrier coating properties. The West System 206 Slow Hardener is not intended for clear coating.
  • GENERAL COATING AND BONDING APPLICATIONS: The 105/206 Epoxy Mixture is used for general coating and bonding applications when extended working and cure time are needed or to provide adequate working time at higher temperatures. This epoxy resin forms a high-strength, moisture-resistan....
Check Stock

West System 105B Epoxy Resin (126.6 fl oz) Bundle with 206B Slow Epoxy Hardener (27.5 fl oz) and 300 Mini Pumps Epoxy Metering 3-Pack Pump Set (3 Items)

  • ...is a versatile low-viscosity epoxy system. It is used for boat building, composite construction and repairs that require high-strength, waterproof coating, bonding, and filling. It readily wets out fabrics and porous materials, and is easily modified for a wide range of working conditions and applications.
  • NO STRONG SOLVENT ODOR: 105 Epoxy Resin is formulated without volatile solvents and does not shrink after curing. It has a relatively high flash point and no strong solvent odor, making it safer to work with than polyester or vinylester resins. Resin viscosity is approximately 1000 centipoise (cP) at 72-degree-F (22-degree-C).
  • FIVE-PART RESIN TO ONE-PART HARDENER RATIO: When combined with 105 Resin in a five-part epoxy resin to one-part hardener ratio, this cured resin/206 Slow Hardener mixture yields a rigid, high-strength, moisture-resistant solid with excellent bonding and barrier coating properties. The West System 206 Slow Hardener is not intended for clear coating.
  • GENERAL COATING AND BONDING APPLICATIONS: The 105/206 Epoxy Mixture is used for general coating and bonding applications when extended working and cure time are needed or to provide adequate working time at higher temperatures. This epoxy resin forms a high-strength, moisture-resistan....
Check Stock

West System 105A Epoxy Resin (32 fl oz) Bundle with 205A Fast Epoxy Hardener (7 fl oz) and 300 Mini Pumps Epoxy Metering 3-Pack Pump Set (3 Items)

  • ...is a versatile low-viscosity epoxy system. It is used for boat building, composite construction and repairs that require high-strength, waterproof coating, bonding, and filling. It readily wets out fabrics and porous materials, and is easily modified for a wide range of working conditions and applications.
  • NO STRONG SOLVENT ODOR: 105 Epoxy Resin is formulated without volatile solvents and does not shrink after curing. It has a relatively high flash point and no strong solvent odor, making it safer to work with than polyester or vinylester resins. Resin viscosity is approximately 1000 centipoise (cP) at 72-degree-F (22-degree-C).
  • PRE-WARM THE RESIN AND HARDENER: Cold temperatures increase an epoxys viscosity, making it harder to dispense, mix and apply. Warming resin and hardener reduces their viscosity, so they flow easily through their dispensing pumps. To pre-warm, place the resin and hardener containers under a warming lamp or in a warm-water bath. Pre-warmed resins and hardeners will not cling as much to your mixing equipment.
  • FIVE-PART RESIN TO ONE-PART HARDENER RATIO: Mix 205 Fast Epoxy Hardener with 105 Epoxy Resin in a five-part resin to one-part hardener ratio. The resulting cured epoxy is a rigid, high-strength, moisture-resistant solid. The c....
Check Stock

West System 105B Epoxy Resin (126.6 fl oz) Bundle with 205B Fast Epoxy Hardener (27.5 fl oz) and 300 Mini Pumps Epoxy Metering 3-Pack Pump Set (3 Items)

  • ...is a versatile low-viscosity epoxy system. It is used for boat building, composite construction and repairs that require high-strength, waterproof coating, bonding, and filling. It readily wets out fabrics and porous materials, and is easily modified for a wide range of working conditions and applications.
  • NO STRONG SOLVENT ODOR: 105 Epoxy Resin is formulated without volatile solvents and does not shrink after curing. It has a relatively high flash point and no strong solvent odor, making it safer to work with than polyester or vinylester resins. Resin viscosity is approximately 1000 centipoise (cP) at 72-degree-F (22-degree-C).
  • PRE-WARM THE RESIN AND HARDENER: Cold temperatures increase an epoxys viscosity, making it harder to dispense, mix and apply. Warming resin and hardener reduces their viscosity, so they flow easily through their dispensing pumps. To pre-warm, place the resin and hardener containers under a warming lamp or in a warm-water bath. Pre-warmed resins and hardeners will not cling as much to your mixing equipment.
  • FIVE-PART RESIN TO ONE-PART HARDENER RATIO: Mix 205 Fast Epoxy Hardener with 105 Epoxy Resin in a five-part resin to one-part hardener ratio. The resulting cured epoxy is a rigid, high-strength, moisture-resistant solid. The c....
Check Stock

3M 16024 PPS Half Kit

  • 3M 16024 Half Kit is designed for use with 3M Paint Preparation System..
  • Half size refers to a paint mix volume of up to 28 fl oz (850mL), ideal for 4+panel repairs..
  • System enables the painter to consistently spray at 90 degrees to the part, no matter the part orientation (even upside down), often reducing paint consumption..
  • PPS available in 30 fl oz, 6 fl oz, 13.5 fl oz, 22 fl oz, and 28 fl oz sizes..
  • PPS reduces cleaning solvent consumption by 70%..
Check Stock

West System 105A Epoxy Resin (32 fl oz) Bundle with 207SA Special Clear Epoxy Hardener (10.6 fl oz) and 300 Mini Pumps Epoxy Metering 3-Pack Pump Set (3 Items)

  • ...is a versatile low-viscosity epoxy system. It is used for boat building, composite construction and repairs that require high-strength, waterproof coating, bonding, and filling. It readily wets out fabrics and porous materials, and is easily modified for a wide range of working conditions and applications.
  • NO STRONG SOLVENT ODOR: 105 Epoxy Resin is formulated without volatile solvents and does not shrink after curing. It has a relatively high flash point and no strong solvent odor, making it safer to work with than polyester or vinylester resins. Resin viscosity is approximately 1000 centipoise (cP) at 72-degree-F (22-degree-C).
  • STRONG PHYSICAL PROPERTIES: The 105/207 Epoxy Mixture has strong physical properties, so it can be used as a structural adhesive for gluing and laminating. It has excellent compatibility with paints and varnishes. An ultraviolet inhibitor in 207 Special Clear Hardener helps provide a beautiful, long-lasting finish when used with quality UV filtering varnish. The 105/207 Epoxy Mixture cures clear and colorless.
  • APPLICATIONS: Three coats or more can be applied in one day without additional surface preparation. Fewer coats are required to fill fiberglass weave and in most cases, the final coating can be sanded the following day. Bu....
Check Stock

West System 105B Epoxy Resin (126.6 fl oz) Bundle with 207SB Special Clear Epoxy Hardener (42.2 fl oz) and 300 Mini Pumps Epoxy Metering 3-Pack Pump Set (3 Items)

  • ...is a versatile low-viscosity epoxy system. It is used for boat building, composite construction and repairs that require high-strength, waterproof coating, bonding, and filling. It readily wets out fabrics and porous materials, and is easily modified for a wide range of working conditions and applications.
  • NO STRONG SOLVENT ODOR: 105 Epoxy Resin is formulated without volatile solvents and does not shrink after curing. It has a relatively high flash point and no strong solvent odor, making it safer to work with than polyester or vinylester resins. Resin viscosity is approximately 1000 centipoise (cP) at 72-degree-F (22-degree-C).
  • STRONG PHYSICAL PROPERTIES: The 105/207 Epoxy Mixture has strong physical properties, so it can be used as a structural adhesive for gluing and laminating. It has excellent compatibility with paints and varnishes. An ultraviolet inhibitor in 207 Special Clear Hardener helps provide a beautiful, long-lasting finish when used with quality UV filtering varnish. The 105/207 Epoxy Mixture cures clear and colorless.
  • APPLICATIONS: Three coats or more can be applied in one day without additional surface preparation. Fewer coats are required to fill fiberglass weave and in most cases, the final coating can be sanded the following day. Bu....
Check Stock

FOUR UNCLES IRONCUBE AC Flush Kit,A/C Air Conditioner System Flush Canister Kit Clean Tool Set R134a R12 R22 R410a R404a for Auto Car with 3.5 ft Hose American Interface

  • ...to Air Conditioning Flush Kit to flush your vehicle after compressor burnouts to remove moisture,acid,and contaminants.
  • VERSATILE FOR YOUR NEEDS:Quickly and efficiently remove old refrigerant oil and debris before replacing or retrofitting your compressor system.
  • Designed to work with any lightweight AC system flush solvent (not included).
  • Can even be used to clean out a refrigerator line or a line set on your home.
  • EASY TO USE FLUSHING SYSTEM:Simply fill your AC flush tool canister with a lightweight AC flush solvent then tighten the fittings to the canister.
  • Attach to your air compressor (not included), and turn on the valve switch and air pump.
  • Instructions included for your convenience.
  • Durable and Reusable:The air conditioner system flush kit is made of thickened stainless steel canister without leak.The canister is high pressure and corrosion resistant for a long service life,the canister is reusable, will stand up to years of wear and tear..
  • The package includes:1 X Empty Canister,1 X Hose(2.95ft),2 X Nozzles(1 x USA fitting and 1x Japanese fitting).We offer 365 days satisfaction service for our A/C flush kit. If there is any problem, our professional service team will provide you with the satisfactory solution within 24 hou....
Check Stock

Berryman Products 2630 4 Pack B-12 Chemtool Professional 3-Step Fuel System Maintenance Kit 16 oz./9 0z

  • Complete gasoline fuel system cleaning and maintenance program.
  • Maximizes drivability, fuel economy, and injector life.
  • Contains powerful detergents and high-energy solvent technology.
Check Stock