Reviews Solvent Based Coating

Chemicar Heavy Duty Siphon Undercoating Gun with Bonus Flexible 22 Undercoating Spray Wand

  • Featuring a large intake tube (9.5 mm) and wide mouth fill tank, the RA/M undercoating gun makes applying undercoating, rustproofing, bedliners and....
  • Designed with durability, comfort and ease in mind, this heavy duty siphon undercoating gun is equipped with an ergonomic solvent resistant handle and....
  • Spray many different products ranging from undercoating (wax, water or bitumen based), cavity coating (wax based) to stone chip protection (rubber,....
  • With its adjustable nozzle, the RA/M offers different spraying textures ranging from fine mist to more pronounced textured finishes. Included with the....
  • Ergonomic solvent resistant handle. Wide mouth fill tank. Body: Die cast: Zn + Al + Mg Alloy. Tank: Aluminum 1 Liter. Weight: 1.5 lbs. Noise level:....
Check Stock

Airbrush Spray Paint Clamping/Standing Base with 20 Wire Alligator Clips for Gundam/Hobby Modeling

  • In response to customer requests for marker type finishing clear coating materials, Mr. Hobby launched a GLOSS Gundam marker clear coat.
  • The ink is water-based with no solvents, so it does not melt the surface and can be applied over a surface that is painted with Gundam marker.
  • We recommend painting with Gundam marker airbrush, but you can also apply with a pen.
  • The clear ink is weaker than solvent-based coating materials, so the paint may easily peel off when the dried surface is rubbed. Please be careful when handling.
Check Stock

3M Scotch General Purpose Masking Tape 2020-24A-CP, 0.94-Inch by 60.1-Yards, 2 Set (9 Rolls)

  • Coating being applied – water-based, solvent-based.
  • For non-damageable surfaces such as – vinyl, carpet and wood.
Check Stock

Black Jack 6190 Roof and Foundation Liquid Asphalt Coating, 5-Gallon Pail

  • The product is 4.75 Gallon Non-Fibered Asphalt Emulsion Water Based Roof Coating - Odorless - Solvent-Free -Waterproofing/Resurfacing/Sealing Applications.
  • The product is manufactured in United States.
  • This coating will weatherproof and help seal surfaces.
  • Can also be used to seal and protect underground wood footings and metal surfaces.
Check Stock

West System 105A Epoxy Resin (32 fl oz) Bundle with 206A Slow Epoxy Hardener (7 fl oz) and 300 Mini Pumps Epoxy Metering 3-Pack Pump Set (3 Items)

  • ...is a versatile low-viscosity epoxy system. It is used for boat building, composite construction and repairs that require high-strength, waterproof coating, bonding, and filling. It readily wets out fabrics and porous materials, and is easily modified for a wide range of working conditions and applications.
  • NO STRONG SOLVENT ODOR: 105 Epoxy Resin is formulated without volatile solvents and does not shrink after curing. It has a relatively high flash point and no strong solvent odor, making it safer to work with than polyester or vinylester resins. Resin viscosity is approximately 1000 centipoise (cP) at 72-degree-F (22-degree-C).
  • FIVE-PART RESIN TO ONE-PART HARDENER RATIO: When combined with 105 Resin in a five-part epoxy resin to one-part hardener ratio, this cured resin/206 Slow Hardener mixture yields a rigid, high-strength, moisture-resistant solid with excellent bonding and barrier coating properties. The West System 206 Slow Hardener is not intended for clear coating.
  • GENERAL COATING AND BONDING APPLICATIONS: The 105/206 Epoxy Mixture is used for general coating and bonding applications when extended working and cure time are needed or to provide adequate working time at higher temperatures. This epoxy resin forms a high-strength, moisture-resistan....
Check Stock

West System 105B Epoxy Resin (126.6 fl oz) Bundle with 206B Slow Epoxy Hardener (27.5 fl oz) and 300 Mini Pumps Epoxy Metering 3-Pack Pump Set (3 Items)

  • ...is a versatile low-viscosity epoxy system. It is used for boat building, composite construction and repairs that require high-strength, waterproof coating, bonding, and filling. It readily wets out fabrics and porous materials, and is easily modified for a wide range of working conditions and applications.
  • NO STRONG SOLVENT ODOR: 105 Epoxy Resin is formulated without volatile solvents and does not shrink after curing. It has a relatively high flash point and no strong solvent odor, making it safer to work with than polyester or vinylester resins. Resin viscosity is approximately 1000 centipoise (cP) at 72-degree-F (22-degree-C).
  • FIVE-PART RESIN TO ONE-PART HARDENER RATIO: When combined with 105 Resin in a five-part epoxy resin to one-part hardener ratio, this cured resin/206 Slow Hardener mixture yields a rigid, high-strength, moisture-resistant solid with excellent bonding and barrier coating properties. The West System 206 Slow Hardener is not intended for clear coating.
  • GENERAL COATING AND BONDING APPLICATIONS: The 105/206 Epoxy Mixture is used for general coating and bonding applications when extended working and cure time are needed or to provide adequate working time at higher temperatures. This epoxy resin forms a high-strength, moisture-resistan....
Check Stock

Seymour 16-516 Reflective Water-Based Coatings, Yellow 12 Ounce (Pack of 1)

  • Water-based coating which produces a bright colored reflection when lit by flashlight or headlights.
  • These coatings must be applied over the aluminum base coat or clean, bright aluminum metal.
  • Seymour has developed coatings with waterborne and high-solids resins as an alternative to traditional solvent-based polymers.
  • Seymour products do not contain lead, cadmium, mercury, chromates or chlorinated solvents.
Check Stock

KastKing KastPro Braided Fishing Line,Black,150 Yds,8LB

  • ...astPro is coated to be color fast and has better abrasion resistance. Other brands use a water based coating which tends to merely rest on the surface of braid line and is naturally repelled by the braid material. This results in color fading and reduced abrasion resistance over time. The KastPro process uses a bio solvent based coating that penetrates and wicks into the braid for a more uniform coating with better color, coating life, and increased abrasion resistance..
  • GREAT CASTABILITY – KastPro Spectra braid’s round, smooth finish delivers long, easy casts for both freshwater and saltwater fishing. It leads the industry with the thinnest possible diameters per rated breaking strength in a 4-strand braided fishing line. Low stretch properties means faster hook sets and greater sensitivity..
  • BIOSPOOL –As an extra benefit to our environment, KastKing KastPro fishing lines are spooled on our KastKing BioSpools, which are made with wheat straw. Unlike plastic spools, BioSpool will decompose naturally to reduce landfill bulk. KastKing is an ICAST award-winning manufacturer..
Check Stock

3M CG3300 Transparency Film for Laser Printers 50 Sheets

  • Made from 50% Recycled Material & Recyclable.
Check Stock

Maskote Zinc Stop-Off 2 Quart Pack - Stops galvanizing in unwanted Areas

  • Allows both alkaline & acid cleaning after coating.
  • Easy-to use: applies like housepaints by brushing or dipping.
Check Stock

Maskote Aerosol Zinc Stop-Off

  • Stops galvanizing in unwanted areas such as threads, joints, and weld areas.
  • Allows both alkaline and acid cleaning after coating.
Check Stock

3M PP2950 Copier Transparency Film, 8-1/2-Inch X 11-Inch, 100 Per Box, Black on Clear

  • Made with a Water-based Coating, 99% Solvent Free.
  • Global Product Type: Transparency Films-Laser Copiers.
Check Stock

U-POL Raptor 1K Bed Liner Aerosol Black, 14.3 Ounce Truck Bed Bedliner Coating - 3 Pack

  • Ideal For Truck Beds, Tail Gates, Running Boards, Fender Flares & More.
  • Solvent-Based Coating Ideal For Protecting Truck Beds And All Other Metal, Aluminium, Fiberglass And Wood Surfaces..
  • Specifically Formulated To Offer Superior Adhesion, Impact And Abrasion Resistance And Flexibility, As Well As An Attractive, Texturized Finish That Provides The Ultimate In Truck Bed Protection.
  • For Optimum Results On Bare Metal, Galvanised Steel And Aluminium Surfaces, Apply After Sanding With 80-180 Grit Sandpaper, 1-2 Light Even Coats Of Raptor Acid Etch Primer Aerosol And Allow 30 Minutes Drying Time Before Applying Raptor 1K Truck Bed Coating.
Check Stock