Reviews Solid State Latching Relay

SSR-100, DC-DC Solid State Relay 5-220V DC with Non-Contact Switch, SSR-100 DD

  • Control Method: The solid state relay uses DC-DC control method, which can provide stable performance..
  • Load Current: 100A, Load Voltage: 5-220VDC, Control Voltage: 3-32VDC, Control Current: DC: 5-50mA.
  • Installation: The solid state relay uses bolted installation method, easy to install and remove..
  • Heat Dissipation: The relay has pure aluminum heat sink base plate for fast heat dissipation..
  • Material: The solid state relay is made of thyristor and optoelectronic with non-contact switch..
Check Stock

Solid State Relay, 90 to 280VAC, 25A

  • Solid state relay module, long service life and high reliability, low drive voltage and current, widely used in many automatic control systems..
  • Model: XRE-1D4840 Solid State Relay 40A DC to AC..
  • Input voltage: 3-32V DC Output voltage: 24-480V AC.
  • Note: The current of this product is 40A for a long time. A large heat sink or fan need to be added..
  • Package Content: 2 x 40A Solid State Relay, ideal for automatic process control application, a must component for temperature controller and other machinery control system..
Check Stock

4pcs Solid State Relay SSR-25DA DC to AC Input 3-32VDC to Output 24-480VAC 25A 250V Solid State Relay Module

  • 【Model】SSR-25DA 25A 250V Solid State Relay Module.
  • 【SSR-25DA Parameter】solid state module relay SSR-25DA, 3-32VDC/24-480VAC.
  • 【Relay Size】(L*W*H)62×45×24mm/2.48 x 1.73 x 0.94".
  • 【SSR Application】No electric spark, no noise, high switching speed, especially suitable for corrosion, moisture, dust resistant and other harsh environments. Widely used in many automatic control systems.
  • 【Package Included】4pcs SSR-25DA solid state relay module.
Check Stock

SparkFun Qwiic Quad Solid State Relay Kit - Attach 4 Solid State relays to a Single PCB - Control Some serious Power All from The Easy-to-use Qwiic Connect System - configurable I2C

  • This kit allows you to assemble up to four of these solid state relays on a single PCB and control them all via I2C from your favorite microcontroller..
  • The Quad Solid State Relay Kit comes with four solid state relays rated up to 40A at voltages between 28-380 VAC so you can switch some serious power with this board all from a single Qwiic connector attached to a low-powered microcontroller..
  • Features: Operating Voltage: 2.5-3.6V (3.3V recommended). I2C Address: 0x08 (Default), 0x09 (Alternate via jumper). Max Current (Through Relay): 40A (24-380VAC). Zero Cross Trigger. Normally Open Circuit Only.
  • Includes: 1x Qwiic Quad Solid State PCB. 4x Solid State Relay - 40A (3-32V DC Input). 8x 4-40 Hex Nut. 8x 3/8in. Phillips Machine Screw - 4-40 Thread. Hook-up Wire 8" - 22 AWG (Red). Hook-up Wire 8" - 22 AWG (Black).
  • Assembly required. Tools are not included. You will need a screwdriver and wire clippers/strippers..
Check Stock

Two Position Low V Actuator w/End Switch

  • Output: fan relay, alarm relay and 4-20ma current loop.
  • Controls: buzzer, Digital display, latching relay, relay Delay, relay minimum runtime.
  • Mounts on a standard 4” x 4” electrical box.
  • 5 a spdt fan relay controls starters of exhaust fans.
Check Stock

Inkbird SSR Solid State Relay SSR 40DA for PID Thermostat Temperature Controller

  • Model No.: SSR-80DA；If you want to reach 80A, you need to add a large heat sink and fan.
  • output Voltage : 24-480vac；Special attention:This relay cannot be used for more than 30A for a long time.If that actual use current exceeds 15A，It is necessary to separately configure the heat sink..
  • Total size (approximate) : 58 x 45 x 32Mm/2.3" x 1.8" x 1.26" (l*w*t).
  • material : metal, plastic, electronic parts.
Check Stock

Macurco TX-12-HS White Hydrogen Sulfide H2S (Line Voltage) Fixed Gas Detector Controller Transducer with White Housing

  • Output: fan relay, alarm relay and 4-20ma current loop.
  • Controls: buzzer, Digital display, latching relay, relay Delay, relay minimum runtime.
  • Mounts on a standard 4” x 4” electrical box.
  • 5 a spdt fan relay controls starters of exhaust fans.
Check Stock

SainSmart 5V 2A 4 Channel Solid State Relay Module High Level Trigger Black for Arduino Uno Duemilanove MEGA2560 MEGA1280 ARM DSP PIC

Check Stock

RF Remote Control Reverse Polarity 12VDC Motor Control with Auxiliary Switch Input

  • ...y for its low repetitive rate and re-learn mode, by which it can delete the old code and re-learn a new code when a remote control get lost, so you are always in control of it..
  • 3. Remote Relay with 3 Modes of Operation – Use a jumper to configure 3 modes of operating selection pulse / momentary, hold / toggle and latching mode. 4 independent relay channels can either work together (in latching) for polarity reversing or individually (in pulse / hold) to control different electronics, such as two channels for garage door controller motor, the other two for entry lights..
  • 4. Easy and Flexible Switch Relay – The wireless relay kit is a perfect remote switch for those hobbyists with home automation DIY projects or business Industrial electrical. The power input voltage is 12V, and each receiver’s relay capacity is up to [email protected] and [email protected]..
  • 5. Wide Applications – The wireless remote control switch can be widely used in short and long range turn devices on / off wirelessly, anti-theft alarm control panels, lifts, boats, motor-driven curtain, roller blinds, garage door openers, gate barriers, motorcycles, vehicles, cars, trucks, RVs, electric generator, electric door release locks, windows, manual switches extender, LED lighting ....
Check Stock

Twidec/Output Single Phase SSR Solid State Relay 80A 3-32V DC to 24-480V AC SSR-80DA

  • Model No.: SSR-80DA；If you want to reach 80A, you need to add a large heat sink and fan.
  • output Voltage : 24-480vac；Special attention:This relay cannot be used for more than 30A for a long time.If that actual use current exceeds 15A，It is necessary to separately configure the heat sink..
  • Total size (approximate) : 58 x 45 x 32Mm/2.3" x 1.8" x 1.26" (l*w*t).
  • material : metal, plastic, electronic parts.
Check Stock

Solid State Relay SSR-40AA 40A AC to AC Input 80-250V AC and Output 24-380V AC (SSR-40 AA)

Check Stock

uxcell BEM-14840DA 3-32V DC to 24-480V AC 40A Output Single Phase SSR Solid State Relay

  • Total Size (Approx.) : 58 x 45 x 32mm / 2.3" x 1.8" x 1.26" (L*W*T).
Check Stock

Opto 22 DC60MP MP Model DC Control Solid State Relay, 60 VDC, 3 Amps, 4000 VRMS Isolation Voltage

  • Special attention: the current of this product is 10A for a long time.A large heat sink or fan need to be added.Model: SSR-40DA Solid State Relay 40A DC to AC.
  • Input voltage: 3-32V DC Output voltage: 24-380V AC.
  • Item size: 6.2 x 4.5 x 2.3cm/ 2.4 x 1.8 x 0.9inch(L*W*H).
Check Stock