Reviews Solid Carbide Saw Blanks

4\ Carbide Grit Hole Saw with Arbor & Drill bit for Brick, Stucco

• This Carbide grit hole saw bit includes 4” 102mm hole saw cutter, 1 of 0.43”(11mm) hex shank mandrel, 1 of 3.5”(89mm) carbide tipped pilot drill bit , Extra 1 of 3m tape measure..
• This Carbide hole saw bit is your ideal choice for Hardy Plank, Drywall, fiber cement siding , backer board, stucco, Plasterboard.
• The carbide grit edge hardness overs 80HRC.It is more hard, sharp . It’s a longer life in abrasive material. The Carbide hole saw bit cuts through a wide range of abrasive materials.
• The specially designing edge cuts more clean ,smooth . It is more fast than tradition hole saw up to 50%..

IRWIN Tools Polycrystalline Diamond-Tipped Fiber Cement Circular Saw Blade, 7 1/4-inch, 4-Tooth (4935473)

• Polycrystalline, diamond-tipped teeth provide longer circular saw blade life.
• Circular saw blades last up to 15x longer compared to standard carbide-fiber cement blades.
• Circular saw blade creates less dust compared to a standard carbide-fiber cement blade.
• Cuts up to 9,000' or 5 stacks of fiber cement.

HLOFIZI 4-3/8 Hole Saw for 4' Recessed Lights, Carbide Grit Holes Saw Cutting Plaster Drywall Ceiling Sheetrock

• LONG LIFE - Hard tungsten carbide grit hole saw edge for a longer life in abrasive materials. Open back design allows for quick and easy plug removal.
• FAST EASY CLEAN CUTTING - HLOFIZI 4-3/8 Hole Saw for Recessed Lights allows for smooth cut hole in ceiling plaster and dry wall. Continuous rim for clean cut without chips or cracking the plaster.
• PERFECT HOLE SIZE - Solid welded construction helps provide accurately sized holes for recessed lighting, leaves just enough space that 4" can light fixture fits.
• MULTI-APPLICATION - Perfect cut through drywall, plaster, lath and plaster, wood and stucco.This hole saw for plaster for any recessed light installation job.
• Satisfactory Service: If our HLOFIZI Carbide Grit Holes Saw you received is defective or unsatisfactory. We sincerely apologize and will definitely send you the new ones in no time. We appreciate all your remarks and comments. They are the key tools to develop and improve our handmade and heartcrafted products.

Micro 100 SRM-040-100 Round Blank, 4 mm Shank Dia, 100 mm OAL, Uncoated

Micro 100 SR-125-4 Round Blank, 1/8\ Shank Dia, 4\ OAL, Uncoated

HLOFIZI 6-3/8 Hole Saw for 6\ Recessed Lights, Carbide Grit Holes Saw Cutting Plaster Drywall Ceiling Sheetrock, Green

• LONG LIFE - Hard tungsten carbide grit hole saw edge for a longer life in abrasive materials. Open back design allows for quick and easy plug removal.
• FAST EASY CLEAN CUTTING - HLOFIZI 6-3/8 Hole Saw for Recessed Lights allows for smooth cut hole in ceiling plaster and dry wall. Continuous rim for clean cut without chips or cracking the plaster.
• PERFECT HOLE SIZE - Solid welded construction helps provide accurately sized holes for recessed lighting, leaves just enough space that 6" can light fixture fits.
• MULTI-APPLICATION - Perfect cut through drywall, plaster, lath and plaster, wood and stucco.This hole saw for plaster for any recessed light installation job.
• Satisfactory Service: If our HLOFIZI Carbide Grit Holes Saw you received is defective or unsatisfactory. We sincerely apologize and will definitely send you the new ones in no time. We appreciate all your remarks and comments. They are the key tools to develop and improve our handmade and heartcrafted products.

2 inch Carbide Grit Hole Saw, 1-1/2 Inch Cutting Depth for Brick, Concrete Block, Stucco

• 【PACKAGE】This Carbide grit hole saw kit includes 4 3/8 Inch(111mm) Black SAW BLADE, 1 SDS PLUG MANDREL, 1 DRILL BIT, and 1 CARBIDE TIPPED PILOT DRILL BIT to satisfy your different needs.
• 【UNIVERSAL APPLICATION】This Carbide grit hole saw is your ideal choice for brick, concrete block, fiber cement siding , backer board, stucco & old plaster.
• 【EASIER TO CUT】Carbide grit hole saw cuts through a wide range of abrasive materials.
• 【100% Satisfaction Guarantee】We are dedicated to providing every customer with satisfying products and services.If you are not satisfied with our product, we will provide a free return or refund for you.

5pcs Mixed Universal Carbide oscillating Tool Blades Set for Tile Grout Mortar Concrete Masonry

• [Include 3 kinds of Blades] Our carbide multitool blade kit include 3 different kinds of saw blades. Semicircle, Triangula and Finger Carbide saw blades which are good at grinding tile adhesives, cement, thin-set mortar, rasping wood and stone..
• [High Quality Saw Blades] Our Oscillating Multi Tool Saw Blades are Made of Carbide Material,robust and durable, which works well when grinding and cutting grout, ceramic tile..
• [Compatible With Most Oscillating Tools] This mixed carbide multi-tool blades set is compatible with the majority of the oscillating tool brands such as Fein Multimaster, Ryobi, Hitachi, Chicago, Mastercraft, Milwaukee, Ridgid, Black & Decker, Rockwell, Dewalt, Einhell, Porter Cable, Craftsman and more..
• [Widely Use Range] This Universal Fit Carbide Saw Blade is a wide use blade that quickly removes material such as grout, plaster and other adhesive products from floor or wall tiles during replacement or restoration projectscontain. It also can meet a variety of needs, which could be used for workshop, household or other place..

IVY Classic 26632 2' Carbide Grit Edge Hole Saw Kit, USA, 1/Card

• Kit includes carbide grit hole saw, 3/8-inch mandrel and carbide masonry pilot bit.
• Cuts ceramic tile, marble, slate and fiberglass.
• Continuous rim of carbide grit ensures smooth cutting.
• Carbide Grit Hole Saw Made in USA, Diameter 2-inch, Cutting Depth: 1-inch.

HLOFIZI 2-1/8 Inch Carbide Tipped Hole Saw Multi-Material Hole Cutter for Wood, MDF, Drywall, Plaster, Fiberglass, 5X Faster, Green

• Multi-Material Applications - 2-1/8 hole saw ideal for cutting hard wood, MDF, drywall, plaster, stucco, sheetrock. Not recommended for metal products.
• High Efficient and Precise - With tungsten carbide tipped, cuts up to 5X faster than standard bi-metal hole saws, and make smooth clean holes. This hole saw can cut at an angle, and enlarge existing holes.
• Easy plug removal - Optimized slot design for fast plug removal. Up to 2 inch depth of cut. Shank fits 3/8" chuck.
• More Durablity - Heavy duty solid backing plate won't flex for accurate holes every time. This carbide tipped hole saw comes with arbor.
• 100% SATISFACTION GURANTEED: If you are dissatisfied with our 2-1/8" hole saw for any reason, return your order within 90-Days for full refund, we will always go above and beyond to ensure you are happy with your customer experience. We appreciate all your remarks and comments. They are the key tools to develop and improve our products.

WoWSupM 6-3/8 ,4-3/8 inch Recessed Light Installation kit Carbide Grit Hole Saw Cutting Drywall, Ceilin Tile　for 6” ,4”Lights

• 【Package】The Carbide grit hole saw Installation light kit includes:1pcs of 4-3/8”, 1pcs of 6-3/8" carbide drill bits(Black or Red), 1pcs of 0.43” hex shank arbor, 2pcs of Ø0.25”x 3.5" HSS pilot drill bits..
• [Application] This Carbide grit installation light hole saw kit is For 4”, 6” recessed light, Cutting Drywall, Plaster, Ceiling ,Corn Hole Board, Acoustical Tile. Cutting depth: Up to 1” ..
• [Advantage 1] The carbide grit teeth hardness over 80HRC.It is more sharp ,hard. It’s a longer life in abrasive material..
• [Advantage 2] The specially back removes the plug easily. It’s faster than bi-metal hole saw 2 times..
• [Advantage 3] The specially sharp teeth cuts more smooth,clean . It is more faster than tradition carbide grit hole saw up to 30%. It is more faster than tradition bi-metal hole saw up to 50%..

HLOFIZI 6 Inch Carbide Tipped Hole Saw for Recessed Lights Multi-Material Hole Cutting Wood, Drywall, Plastic, PVC, Fiberglass, 5X Faster, Green

• Multi-Material Applications - 6 hole saw ideal for cutting hard wood, plastic, drywall. Not recommended for metal products.
• High Efficient and Precise - With tungsten carbide tipped, cuts up to 5X faster than standard bi-metal hole saws, and make smooth clean holes. This hole saw can cut at an angle, and enlarge existing holes.
• Easy plug removal - Optimized slot design for fast plug removal. Up to 2-1/4 inch depth of cut. Shank fits 1/2" chuck.
• More Durablity - Heavy duty solid backing plate won't flex for accurate holes every time. This carbide tipped hole saw comes with arbor.
• 100% SATISFACTION GURANTEED: If you are dissatisfied with our 4 1/8" hole saw for any reason, return your order within 90-Days for full refund, we will always go above and beyond to ensure you are happy with your customer experience. We appreciate all your remarks and comments. They are the key tools to develop and improve our products.

Outdoor Power Deals Carbide Chainsaw Saw Chain 20\ 3/8\ 33R-72 050 for Some Stihl MS290 MS291 MS311 MS390

• 3/8 pitch 0.050 gauge - 72 Drive Link - Semi Chisel Type Chain - Very Aggressive Teeth.
• Solid carbide tipped chain is brazed to case hardened saw chain for the ultimate in life and cutting ability. Designed for woodcutting keep it up and out of the dirt and avoid hitting solid objects this can break or chip the carbide tooth.
• ( READ ) MS290 and MS291 can have .325 pitch and this will not fit. Buyer is responsible for verify what pitch chain your saw has.
• Also NOTE Correct use you must allow the chain to cool back to ambient temperature between uses the teeth with break off if you stop using the chain for any amount of time and then pick it up and start going again. Allow chain to cool a minimum of 3 hours.