Reviews Soldering Fume Extractor

Valtcan Fume Extractor Soldering Fan Smoke Absorber

  • Powerful Fume extractor removes Smoke fume, soldering fumes, flux smoke, odor from soldering stations, workstations, nails, glasswork, pyrography, paint etc quick, safely and efficiently..
  • Solder Flux fume extractor fan 496 model equivalent to the 493 plus extra filters. Comes with 3 Active carbon filters, Easily replaceable by swamping out old for new one in the filter slot. Pull filter guard out to remove filter and replace with new one. Then push back filter guard to hold filter in place..
  • Adjustable tilt for optimum solder smoke absorption angle from your workbench. Twist knobs at two ends to loosen and then adjust tilt of smoke absorber. Fasten knobs to secure fan front when desired tilt is obtained..
  • Made of ESD safe material, lightweight and durable material. Low noise and high- efficient fan operates at acceptable db levels in solder workstations..
  • On/off button located in back of smoke absorber fan. Plugs into AC socket for power. Comes in 493 model box with extra filters..
Check Stock

KOTTO Strong Suction Hose Fume Smoke Absorber for Soldering Electric Iron Welding 3d Printing Extractor Absorber Remover DIY Extractor Carbon or HEPA Filter,2 Pack Set Replacement HEPA Filter

  • Soldering Smoke Absorber, Electric Iron Welding Fume Extractor Soldering Smoke Absorber Remover DIY Fume Extractor Filter with Strong Suction..
  • A 24-inch flexible tube, Fume hood can adjust direction according to actual needs..
  • Adjustable optimized 6000 RPM high suction fan is low noise and allows you to remove fumes 5-6 inches away. The fan speed is adjustable. Suction: 40W,....
  • Replacement HEPA Filter for Solder Smoke Absorber..
  • Replacement HEPA Filter absorbs and captures fumes from solder, flux, chemicals, gases and helps to prevent dissipation into the room..
Check Stock

Solder Smoke Absorber Fan and Lamps with Helping Hands, NOEVSBIG Soldering Working Fan with 3pcs Filter,3 Color Modes Stepless Dimmable Soldering Lamp for Repair, Reading, Welding (Brown)

  • 【3 IN 1 Soldering Lamp】: Fume Extractor Fan and lamps can work alone, and also work together. When the smoke-absorbed fan working, its 3 colors and 10 brightness Levels lamps and helping arms can help you work in various light conditions and protect the eyes..
  • 【Soldering Helping Hands Function】: with 2 soldering arms can help to hold PCB board or solder wire when doing a welding job. The position of the arm can be moved for easy use. Ideal tool when third hand is required, useful auxiliary tool in soldering and modeling field..
  • 【High Efficient Fume Extractor Design Help to Remove Soldering Fumes】: Soldering activities produce fumes that are dangerous. They can cause serious long-term health problems if inhaled for long. If you love soldering and can't just stop, then this solder fume fan can help to far the fumes away while soldering..
  • 【Good Stability but Great Flexibility】: The clamp design saves your desk space,180°/135° can be adjusted. The lamp head can be adjusted 220 ° up and down, and 360 ° high flexibility swivel. The whole lamp can be rotated 360°on the base, providing you with greater flexibility. After locking knobs, can fix the lamp without swinging left and right, not falling or shaking..
Check Stock

KOTTO Strong Suction Hose Fume Smoke Absorber for Soldering, Electric Iron Welding, 3d Printing Extractor Absorber Remover DIY Extractor Carbon or HEPA Filter [Updated, Hose pre-attached]

  • Soldering Smoke Absorber, Electric Iron Welding Fume Extractor Soldering Smoke Absorber Remover DIY Fume Extractor Filter with Strong Suction..
  • A 24-inch flexible tube, Fume hood can adjust direction according to actual needs..
  • Adjustable optimized 6000 RPM high suction fan is low noise and allows you to remove fumes 5-6 inches away. The fan speed is adjustable. Suction: 40W, 6000 RPM, 52CFM, Noise Level: 55dbm, Life Expectancy: 50,000 hours, Static pressure: 125mmH2O..
  • Easy to replace the filter, Includes one replacement filter. Working temperature: -20℃～60℃, Power consumption: 120V-240V, 40W ( 12V, 4A Power supply)..
  • US-based customer support, 30 days full satisfaction no question asked return period..
Check Stock

Aoyue 388 CircuitVise - PCB Holder & Helping Hands with Fume Extractor Mount

  • INTEGRATED FUME EXTRACTOR MOUNT & TOOL HOLDER - The only working platform with a built-in molded slot to accommodate the Aoyue 486 or 486+ fume extractor you may already own! Save space and solder safely!.
  • NON-REBOUNDING GOOSENECK ARMS - Precision helping hands are super flexible yet will NOT drift from desired position. Platform is 8" x 8.75".
  • STACKABLE MAGNETIC PCB HOLDERS - Powerful rare-earth magnet pillars can be positioned and stacked anywhere on platform to create an extremely versatile vise for circuit boards of any size. Use with arms for the most stable soldering experience possible..
  • HEAVYWEIGHT STABILITY - Arms are secured to the base using a heavy duty lock washer and screw that can withstand large circuit boards without falling over..
  • EXPANDABLE DIY SYSTEM - Unique construction allows for creative expansion by adding more arms, magnetic holders, and connecting multiple platforms together to handle the most demanding soldering scenarios..
Check Stock

Aoyue 388 CircuitVise Versatile Soldering Platform with Smoke Absorber Mount - 2 Pack

  • Integrated Fume Extractor Mount & Tool Holder - The only working platform with a built-in molded slot to accommodate the Aoyue 486 or 486+ fume extractor you may already own! Save space and solder safely!.
  • Non-Rebounding Gooseneck Arms - Precision helping hands are super flexible yet will NOT drift from desired position. Each Platform is 8" x 8.75".
  • Stackable Magnetic PCB Holders - Powerful rare-earth magnet pillars can be positioned and stacked anywhere on platform to create an extremely versatile vise for circuit boards of any size. Use with arms for the most stable soldering experience possible..
  • Heavyweight Stability - Arms are secured to the base using a heavy duty lock washer and screw that can withstand large circuit boards without falling over..
  • Expandable DIY System - Unique construction allows for creative expansion by adding more arms, magnetic holders, and connecting multiple platforms together to handle the most demanding soldering scenarios..
Check Stock

Solder Fume Extractor Smoke Absorber - Nopwer Smoke Ventilation Filter for Soldering Diy Welding Laser Engraver Nail Salon Hair

  • SOLDER FUME EXTRACTOR: Nopwer fume extractor has 4 to 5 times the air purifying capacity of ordinary solder fume extractor. Effectively absorbs smoke, dust and harmful gases from the air. Purify the air. And the purification rate is 99.99%..
  • THREE-LAYER FILTRATION SYSTEM: The solder fume purifier has three filtration layers. The filtration effect and filtration capacity are 4 times of the common single-layer filter cartridge. Each layer can be replaced individually. Long service life..
  • UNIVERSAL SMOKING TUBE: Highly sealed smoking tube with 80cm length. Can be adjusted 360 degrees. Free positioning without external support. Easy to install. Easy to operate..
  • POWERFUL FUNCTION: Control the air volume suction power by button. Can effectively remove fumes and harmful gases. Used for Diy welding, laser engraving, nail and hair salon..
  • AFTER SALES SERVICE: Solder fume extractor are strictly quality controlled. You will have 3 months free return service. If you have any use and quality problems. I will give you a satisfactory reply within 12 hours.Add to Cart with Confidence！.
Check Stock

Solder Smoker Absorber Remover Fume Extractor Smoke Prevention Absorber DIY Working Fan Soldering with spare Carbon filter

  • Solder Smoke Absorber/Fume Remover/Smoke Extractor Prevention Absorber DIY Working Fan for Soldering Station..
  • It adopt the high performance fan with low noise, and the suction is strongThe structure is simple. The replacement of the activated carbon filter....
  • Optimized 3000 RPM high suction fan is low noise and allows you to remove fumes 5-6 inches away. Long-lasting working time for over 50,000 hours..
  • Comes with 5 Active carbon filters. The filter is made of special foam with refined activated carbon, which has high suction and flux absorption....
  • It's a good helper for mobile phone maintenance, great for electronics, arts and crafts, stained glass work, soldering station work..
Check Stock

OMTech XL-300 Fume Extractor with 5 Stage Air Filter Wheeled Smoke Absorber & Purifier with Remote Control 330W Air Purifier for Laser Cutters & Engravers Soldering Stations CNC Machines

  • INDUSTRIAL FUME EXTRACTOR: The 330W DC motor on OMTech's industrial-strength XL-300 fume extractor creates a powerful 69 ft./sec. airflow to pull in....
  • 5-STAGE FILTER: Our smoke extractor continuously pulls in your machine's fumes and debris, running them progressively through its cotton outer filter,....
  • HIGHLY MOBILE: The 4 quality caster wheels move this small but dependable smoke purifier easily between your devices when needed and then lock smartly....
  • INTUITIVE CONTROL: The digital control panel lets you easily adjust this purifier's air flow and offers timed operation to match each job.
  • SATISFACTION GUARANTEED: OMTech backs this fume extractor with our usual strong warranty and friendly 24/7 customer service, ensuring that you'll....
Check Stock

KOTTO Solder Smoke Absorber Remover Fume Extractor Smoke Prevention Absorber DIY Working Fan Third Hand Soldering Tool PCB Holder Four Magnetic Based With Iron Holder Combo

  • Solder Smoke Absorber/Fume Remover/Smoke Extractor Prevention Absorber DIY Working Fan for Soldering Station 0.4 inch thick activated carbon filter....
  • Optimized 3000 RPM high suction fan is low noise and allows you to remove fumes 5-6 inches away. 4 non-slip heavy duty rubber feet anchors the unit to....
  • 'Third Hand' workshop handyman vice – Ideal for Soldering, Circuit board holder, Assembly, Repair, Modeling, Hobby, Jewelry, Crafts. Four adjustable....
  • Weighted base and Anti-Split rubber feet: Solid weighted steel construction, power coated with industrial grade rubber feet ensures a stable base that....
  • Perfect for various projects – You can use our helping hands for all kinds of jobs, many customers use for hobby projects, electronics, arts and....
Check Stock

Msfullsea Vertical Laminar Flow Hood Air Flow Clean Bench Workstation Vertical Laminar Dust Free Room Worktable for Phone LCD Repair Only 1 HEPA Filter (Air Flow Hood)

  • The fume extractor arm is generally used in laboratories, chemical plants, hospitals, mold halls, chemical reaction kettles, welding industry, injection molding machine industry and etc..
  • Lab Fume Hoods can discharge fume, dust, gases, and suspended particles, etc..
  • Smoke extractor arm is mounted on the ceiling，360°free rotation， positioning joints can be swung up and down freely, there are buttons to adjust the tightness of the joints..
  • Transparent lid made of PC material can It can withstand high temperatures of 150 degrees Celsius, with a gas control valve, manually adjust the external valve knob to control the gas flow..
  • Using expansion screws to fix the ceiling fixed base of the lab extractor hood, use self-tapping screws to fix the 360-degree rotation joint, the T-junction connects with the smoke exhaust pipe or smoke system..
Check Stock

SXDOOL Solder Smoker Absorber Remover Fan with Speed Controller,Fume Extractor Smoke Prevention,120mm 120V Cooler Adjustable

  • High airflow cooling fans designed for Solder Smoke Absorber/Fume Remover/Smoke Extractor Prevention Absorber.
  • Features a fan speed controller so you can optimize the airflow and noise for your application..
  • Dual ball bearing design allows the fan continuous operation 24/7 without too much of dust and high temperature concern and have a lifespan of 50,000....
  • Comes with 3pcs 120mmX120mmX3mm Active carbon filters,easy to replace. The filter is made of special foam with refined activated carbon, which has....
  • Great for mobile phone maintenance, great for soldering station work,electronics, arts and crafts, stained glass work, ..
Check Stock

KOTTO Solder Smoke Absorber Remover Fume Extractor Smoke Prevention Absorber DIY Working Fan for Soldering Station with 5 Pack Carbon Filter

  • Solder Smoke Absorber/Fume Remover/Smoke Extractor Prevention Absorber DIY Working Fan for Soldering Station.
  • 0.4 inch thick activated carbon filter absorbs and captures fumes from solder, flux, chemicals, gases and helps to prevent dissipation into the room..
  • Optimized 3000 RPM high suction fan is low noise and allows you to remove fumes 5-6 inches away. 4 non-slip heavy duty rubber feet anchors the unit to....
  • Easy to replace filter, Includes one replacement filter. Working temperature: -20℃～60℃, Power consumption: 120V, 30W (50 / 60Hz)..
  • US based customer support, 30 days full satisfaction no question asked return period..
Check Stock