Blue Solder Sucker Desoldering Pump Sucking Vacuum Desoldering Pump with Teflone Tip 13 Solder Sucker Silicone Desoldering Tool Desoldering Pumps
- HIGH QUALITY The solder sucker has high quality plastic material, high temperature heat-resisting during long term use. 13 inch long....
- DESIGN Designed in color blue and orange plastic. Heavy-duty solder remover has anti-skid design. Solder pump is easy to hold and use. Desolder pump....
- EASY TO USE You can use the desoldering wick pump just by Cocking the pump's mechanism by pushing down on the table with your non-soldering hand.....
- AMBIDEXTROUS Simple design construction of the solder sucking vacuum makes it comfortable to use with either hand. Everyone can use soldapult easily.
- SOLDER REMOVAL KIT Use the solder sucker for wide as well as very small and hard to reach places. Desolador can be used to fix all small PCB board....
Check Stock
CCOZN Solder Wicks, 3 Pack No-Clean Solder Braided Wicks Desoldering Wicks For Solder Removal Tool, 0.12/0.1/0.08 Inch Width 1.5 Meter Length
- ☃[Package Include] You will get 3 packs No-Clean Solder Braided Wicks.
- ☃[Appropriate Size] Package includes 1 pack 2.5mm x 1.5m / 0.1inch x 5 ft solder wick, 1 pack 2.0mm x 1.5m /0.08inch x 5ft solder wick, 1 pack 2.0mm x 1.5m /0.08inch x 5ft solder wick..
- ☃[Premium Material]The Braided Desoldering Wicks are made of 100% copper wires with fine braid design.Using flat stitch weaving, fast heat conduction, anti-hot, strong capillary action to pull in excess solder..
- ☃[Solder Braided Wicks]The solder wicks with no-clean design to make sure that just little residues left behind and the residues are halide free, non-corrosive and non-conductive, greatly saving working time..
- ☃[Applicable Occasions] The no-clean desoldering wicks are suitable for industry welding, labs work or home work.Not only improves work efficiency, but also does not damage the PCB board.Suitable for re-soldering and desoldering..
Check Stock
Portable Solder Iron Tip Cleaners Metal Base Holder Station Cleaning Ball with 3 Soldering Cleaning Wire Soft Coiled Copper for Cleaning Soldering Irons Tips
- √ Ideal Solder choice for soldering tip cleaner —— The high quality copper material, 100% copper cleaning wire, It is smokeless, tasteless, non-toxic, Soft coiled copper tip cleaner can reduce oxide accumulation effectively and prolong soldering iron tip service life.
- √ No need water, No temperature reduction —— No water required, meaning less chance of oxidation and won't reduce tips temperature, Avoid soldering iron cooling, improve welding efficiency.
- √ Coiled copper cleaning the solder tip cleaner —— Won't damage your soldering tips, effectively prevent iron tip oxidation, to prolong tip service life.
- √ Metal material of the solder container base —— The shell house made of iron material, No afraid of the high temperature solder head when soldering.
- √ with 2 Replacement coiled copper ball cleaners —— Total 3 coiled copper cleaners for this item, 18 grams each / 3 per pack.
Check Stock
Soldering Tip Cleaner, Wire-type Soldering Iron Tip Cleaner With Holder, Soft Coiled Brass Tip Cleaner Kit with 4 PCS Solder Tip Cleaning Wire and 1 PC Holder for Cleaning Soldering Irons and Tips
- Time Saver:Does a great job of keeping the solder gun tip clean regardless of solder gun temp. Used 6-8 times so far and the coiled brass is still in great shape. A few dabs in this, a touch of flux, and solder away! The soldering iron tip cleaner will save you lots of time..
- High Quality Material:The best material for these cleaners is high-quality brass and extra-strong stainless steel. A cleaner resembles the ball of spiral-shaped brass fine chips. Brass has a lower density than the solder’s tip coating material but is higher than the oxidation products on the tool surface. It is sufficient to immerse the soldering iron’s tip in the chips to remove the oxidation..
- Cleaning With This Soldering Iron Tip Cleaner Does Not Require Water: This special cleaner does not reduce the working temperature of the tool. They are made of non-corrosive material and does not require additional time the tool’s reheating..
- Easy to Use:The holder has two parts. You can separate the two parts to clean tin residual easily. Our soldering iron tip cleaner kit have 4 Pack tip cleaner that can meet the maximum of use’s requirement.They require careful care – it is forbidden to sharpen them and clean only with sponges.Always store the clean....
Check StockSainwora 10 Pcs Soldering Accessories Kit Includes Desoldering Pump,Pocket Pack Solder and Repair Tools Solder Sucker Tool Kits
- ★【High Quality】Super high pressure vacuum with aluminum body frame，can remove solder from a printed circuit board effectively.
- ★【Excellent Function】Excellent thermal transfer for faster, safer desoldering using lower temperature irons.durable and not easy to age.
- ★【Powerful Suction】Made of high temperature resistant nylon material.Heated up the solder pushed the button,all solder sucked up,super easy to....
- ★【Low Residue】Solder sucker desoldering pump helps to clean the solder and avoid short circuit, Anti-scalding and high temperature resistant tin....
- ★【Special Design】Right or Left handed design allows easy one-handed use.Easy to disassemble and clean, easy to disassemble by slight rotation,....
Check Stock350 Pcs Solder Seal Wire Connectors Heat Shrink Butt Connectors Kit Marine Waterproof Wiring Electrical Cable Splice Terminals for Boat Automotive RV Trailer
- Easy to Use: Heat shrink wire connectors can be connected with just a heat gun, no crimping tool or soldering machine is needed..
- Waterproof and Insulating: Solder seal wire connectors with low heat solder and hot melt adhesive can produce a perfect seal, which helps to be better waterproof..
- Wide Applications: Butt connectors are ideal for marine, automotive, trailer and other outdoor applications..
- High Quality Solder Seal Rings: Use exclusive material in the wire connectors to avoid shrink tubing melting before solder..
- Package Includes: You will receive 350 pcs waterproof solder wire connectors..
Check Stock
No Clean Soldering Flux Pen and Solder Remover Wick, 0.1 Inch Wide and 59 Inch Long, Solder Braid Wick Liquid Solder Flux Pen for Electronics Welding Repair Tabbing Wire Maintenance (6 Pieces)
- ...to meet your needs for daily use and replacement.
- Suitable size: the rosin flux pen measures about 14.3 cm/ 5.6 inches in length, and the solder braided wick is about 1.5 m/ 59 inches long and 2.5 mm/ 0.1 inches wide, which is convenient to hold in hand.
- Please check the size carefully before purchasing.
- Quality material: these no-clean soldering wicks are made of quality copper wire and adopt precise weaving technology, which can enhance tension on the surface to absorb excess solder.
- The liquid solder pen is made of reliable materials, no leaking and safe for protecting the flux, preventing you from touching the organic solvents.
- Practical tools: 10-ml solder flux pen with soft brush tip can release the liquid flow moderately, which can clean the components without harming the PCB board copper foil or IC pin.
- The solder remover wick features good thermal conductivity and absorption, useful to reduce the risk of thermal injury to the circuit boards.
- Wide applications: these flux pens and braided solder wicks can be applied for laboratory, computer, home repairs and correcting small PCB board errors and through-hole solder joints, electronics welding, etc., bringing a lot of convenience to your work and improving efficiency.
Check StockMIKIMIQI Solder Wicks, No-Clean Solder Braided Wicks Desoldering Wicks Solder Removal Tool, 0.1 Inch Width 3 Meter Length
- ❤ Package Include - You will get 1 pack No-Clean Solder Braided Wicks.The color of the label is random..
- ❤ Appropriate Size - The size of the solder wick is 2.5mm x 3m / 0.1inch x 10 ft..
- ❤ Premium Material - The Braided Desoldering Wicks are made of 100% copper wires with fine braid design.Using flat stitch weaving, fast heat conduction, strong capillary action to pull in excess solder..
- ❤ Solder Braided Wicks - The solder wicks with no-clean design to make sure that just little residues left behind and the residues are halide free, non-corrosive and non-conductive, greatly saving working time..
- ❤ Applicable Occasions - The no-clean desoldering wicks are suitable for industry welding, labs work or home work.Not only improves work efficiency, but also does not damage the PCB board..
Check Stock
Soldering Iron Tip Cleaner,LXIANGN Non-slip Solder Flux Brass Tip Cleaner & Base Holder Cleaner Kit for Cleaning Soldering Irons and Tips,No Water Needed
- ✎✎Maintain The Tip's Temperature:Replace the traditional water-permeable sponge,the solder tip cleaner is no need to use water to keep the soldering tips clean, so that will not reduce the tip's temperature, improve your working efficiency..
- ✎✎The Dome Top Design:The soldering iron tip cleaner looks like a ball, hardened solder collects in the bottom,prevents tin slag from splashing on the workbench, keeping the working environment clean..
- ✎✎High Quality Brass Material:The soldering iron tip cleaner is made of high quality stainless steel, the copper wire ball is made of brass material.can reduce oxide accumulation effectively and prolong soldering iron tip service life..
- ✎✎Easy to Use: Insert the tip of the soldering iron into the wire in the mouth cleaner to remove the residual solder from the tip.The solder cleaner has two parts. You can separate the two parts to clean tin residual easily..
- ✎✎Tip of Use:You need to wear gloves when you replace the metal wire, keep the cleaner uprightly when open it, please don't take the metal wire out to sweep the tips, or this will possibly splash the melted residual solder..
Check StockCCOZN Solder Wicks, 2 Pack No-Clean Solder Braided Wicks Desoldering Wicks For Solder Removal Tool, 0.1 Inch Width 1.5 Meter Length
- ☃[Package Include] You will get 2 packs No-Clean Solder Braided Wicks.
- ☃[Appropriate Size] Package includes 2 pack 2.5mm x 1.5m / 0.1inch x 5 ft solder wick.
- ☃[Premium Material]The Braided Desoldering Wicks are made of 100% copper wires with fine braid design.Using flat stitch weaving, fast heat conduction, anti-hot, strong capillary action to pull in excess solder..
- ☃[Solder Braided Wicks]The solder wicks with no-clean design to make sure that just little residues left behind and the residues are halide free, non-corrosive and non-conductive, greatly saving working time..
- ☃[Applicable Occasions] The no-clean desoldering wicks are suitable for industry welding, labs work or home work.Not only improves work efficiency, but also does not damage the PCB board.Suitable for re-soldering and desoldering..
Check Stock
6 Packs Solder Wicks No-Clean Solder Braided Wicks Desoldering Wicks, 2.5mm Width 1.5m Length
- What you get: come with 6 packs of no-clean solder wicks, each wick is about 2.5 mm/ 0.1 inch in width and 1.5 m/ 5 feet long, enough quantity and length for your daily needs.
- No-clean design: the solder braided wicks will just leave little residues after use and the residues are non-conductive and non-corrosive, you do not need to spending time removing them from the boards.
- Reliable material: the desoldering wicks are made of copper wires with nice quality, precise weaving design can improve the capillary effect and the redundant solder absorbing ability, increasing your efficiency.
- Wide applications: the braided solder wicks are suitable for labs, home and industry welding work, practical tools to remove solder and correct errors on small PCB boards, bringing lots of convenience for your work.
- Easy to use: the desoldering wicks can provide a easier way to correct mistakes on small PCB boards and will not make damage to the board, clean small components, suitable for re-soldering and desoldering.
Check StockSoldering Iron Tip Cleaner 4 Pack Non-slip Solder Cleaner with Case Holder No Water Needed Solder Tip Cleaner Soldering Iron Cleaner
- Solder tip cleaner adopts premium copper material, effectively prevent iron tip oxidation, to prolong tip service life..
- Our soldering tip cleaner will not reduce the tip temperature when using, to improve your working efficiency greatly..
- The solder iron tip cleaner adopts ball shell design to prevent residual solder stained your working area..
- No water needed when using solder cleaner, very convenient to use..
- Package include 3 pack soldering iron cleaners with 1 holder case, Safe and no risk to use than conventional tip tinners..
Check StockCCOZN 2 Pack 19.6Ft Solder Wick, No-Clean Solder Braided Wick Desoldering Wick For Solder Removal Tool, 0.1 Inch Width 3m Length for Each
- ☃[Package Include] You will get 2 pack No-Clean solder braided wicks.
- ☃[Appropriate Size] Package includes 2 pack 2.5mm x 3.0 m / 0.1 inch x 9.8 ft solder wicks.
- ☃[Premium Material]The Braided Desoldering Wicks are made of 100% copper wires with fine braid design.Using flat stitch weaving, fast heat conduction, anti-hot, strong capillary action to pull in excess solder..
- ☃[Solder Braided Wick]The solder wicks with no-clean design to make sure that just little residues left behind and the residues are halide free, non-corrosive and non-conductive, greatly saving working time..
- ☃[Applicable Occasions] The no-clean desoldering wicks are suitable for industry welding, labs work or home work.Not only improves work efficiency, but also does not damage the PCB board.Suitable for re-soldering and desoldering..
Check Stock
