Reviews Solder Diameter For Electronics

Electronic Solder Wire Lead Free Rosin Core Flux 2.5% Diameter 0.06in 1.5mm Gauge 1.76oz 50g Sn99 Ag0.3 Cu0.7 Flows Electric Soldering Unleaded PB Free

  • WIDE SOLDER- the diameter of solder wire is 0.06inch/1.5mm, soldering fast, ideal for drag soldering on MCU, IC, DIP components, make soldering quick, suitable most solder job.
  • ROSIN CORE- great solder with rosin core, easy for soldering, the flux 2.5% is better than others with 2.0% on the flowability.
  • LOW MELTING POINT- the melting temperature is about 419 Deg.F, suitable for all soldering tools.
  • WIDELY APPLICATION- the 0.06in diameter solder wire is common to solder most electronics components or wire, ideal for electrical soldering, repairing, diy.
  • ALLOY SOLDER- contained Sn99, Ag0.3 and Cu0.7, make strong solder joint, 0.3% silver is important for electrical conductivity, excellent for soldering.
Check Stock

COLIBROX New 5pc 100w Soldering Gun Kit W/case Iron Solder Professional Style Sodering

  • ...g melt problem after a long soldering session. In addition, the stainless steel iron can withstand at least 5,000 times of impact toughness testing, protecting your soldering pencil from bending, splitting, breaking..
  • WIDE RANGE OF APPLICATIONS: The soldering iron sets are suitable for DIY, various repaired usage of electronics and circuit board, welding, jewelry, guitar, watches, wiring, mobile device, computers hardware, small electronic work, TV capacitors or accessories! It suitable for beginner study electronic engineering and electronics hobbyist..
Check Stock

Ultra-Thin Solder Wire 0.01in (0.3mm) Rosin Core Flux 2.5, Lead Free Solder Wire Sn99 Ag0.3 Cu0.7 Flow 50g Electronics Soldering Electric Solder

  • ULTRA-THIN- the solder wire diameter is just 0.01inch, designed to solder the tiny component, just enough to add enough solder on those small MSD pads.
  • LOW MELTING POINT- solder fast melting at 419F ( 217 Deg.C), suitable all soldering tools.
  • IMPROVED SOLDER- this 0.3mm solder wire content high quality allow Sn99 Ag0.3 Cu0.7, provides excellent conductivity, eliminate soldering issue, reduce labor cost.
  • APPLICATION- good for fine solder work, soldering for electronics equipment.
  • LEAD FREE- Unlead solder, excellent performance for electric soldering project.
Check Stock

Cardas Soldering Wire Quad Eutectic Silver Solder with rosin flux 1/4 lbs (113g) roll

  • 【PARAMETER】Solder Wire Diameter 0.031"/0.8mm, Gross Weight 0.11lbs/50g..
  • 【ADVANTAGES】High Purity Raw Material, Flow Well, Strong Solder Joints, Less Residue, No-Cleaning, Low Melting Temperature.
  • 【OTHER FEATURES】Excellent Electrical Conductivity and Thermal Conductivity, Good Solderability.
  • 【WIDE APPLICATIONS】Soldering Training Course, Home Appliances Repair, Toy Repair, Other Electronic Devices Repair, Electronics DIY, Wire Harness Connection, Battery & Motor Wire Connection, etc..
Check Stock

Kester 44 Solder Wire, 63/37 0.031-in, RMA Rosin, 1-ounce Tube

  • 1-Ounce pocket size pack contains approx 27 feet of solder!.
  • 67/37 Tin/Lead is most common for electronics work.
  • .031" Diameter is common for fine-pitch electronics work.
Check Stock

0.4mm Solder Wire Ultra Thin Gauge 0.015 inch Diameter Rosin Core Lead-Free 1.76oz 50g Sn99 Ag0.3 Cu0.7 Activated Electronics Soldering Fine Electrical Solder Flow Flux

  • 0.015 inch Diameter, Extremely Thin gauge solder wire, great for fine soldering work with small soldering space.
  • No fractures issue, no Corrosion, well designed with alloy materials, excellent for electronics soldering.
  • 418 Deg.F (215 Deg.C) melting temperature point, shorter solder time, avoid soldering damage.
  • Sn99 Ag0.3 Cu0.7 Allow soldering wire, good electrical conductivity, high quality solder joints.
  • RoHS compliant, No Lead solder with Rosin core, Longer lifetime, no clean solder wire.
Check Stock

Fancasee (4 Pack) Replacement 3.5mm x 1.35mm DC Power Male Plug Solder Type Power Supply Jack Connector Adapter for Power Cable Repair

  • Perfect replacement 3.5mm x 1.35mm DC power male plug for worn-out or broken power supply cable plug jack connector adapter repair. Widely apply to CCTV security camera and lighting power adapter cable, media player, MP3 MP4 player, audio video equipments, AV equipment, cellular phone, PDA, small electronics devices and etc..
  • Solder type 3.5mm x 1.35mm DC power male plug replacement.
  • External diameter is 3.5mm, Internal diameter is 1.35mm..
  • Wiring diagram: PIN 1 - the shorter pin is inner.
  • PIN 2 - the longer pin is outer. Suitable for cable with diameter up to 5mm..
  • Easy to handle, you really don't have to be a professional to do this. Insert the cables into the sleeve, solder the bare wire and the plug together, and then twist and lock in place..
  • Package contents: 4-Pack replacement 3.5x1.35mm DC power male plug, solder type..
Check Stock

AUSTOR Pack of 6 Solder Wire 60-40 Rosin Core Solder 0.6mm Electrical Soldering Wire 20g

  • High quality: good solder ability in both electrical conductivity and thermal conductivity, can be accomplished quickly, and fit for various kinds of soldering iron.
  • Easy to use: flows well and heats evenly, the melting point of soldering iron wire is 185°C - 190°C (365°F - 374°F).
  • Relative parameters: Tin 60% and Lead 40% is perfect for electronic assembly, flux 1.8% is good for soldering, 0.6mm diameter for good joints to prevent component overheating.
  • Easy to carry: you can take the solder wire anywhere with your pocket. And the plastic tube will protect solder from dirt and moisture(WARNING: This product can expose you to lead, which is known to the State of California to cause birth defects or other reproductive harm. For more information go to the official Proposition 65 Warnings Website).
  • Wide application: the rosin core solder wire is designed for electrical repairs, such as radios, TVs, VCRs, stereos, wires, motors, circuit board and other electronics devices.
Check Stock

yzc Rosin core solder-Solder wire 63-37 Solder flux, Electronic solder, diameter 1MM, net weight 20G, portable storage tube, suitable for electronics, circuit boards, ICs, etc. DIY(Rosin core solder)

  • 【rosin core solder wire:】Solder flux solder wire with special formula of high-quality tin ingots from Yunnan, China and high-quality rosin..
  • 【Tin wire parameters:】 rosin solder wire Tin 63%- Lead 37% (Sn63-Pb37)..
  • 【Soldering wire specifications:】rosin flux content 1.8%, rosin solder wire 1.0mm (0.0394inch), 20 gm (0.044lbs), gross weight 28 gm (0.0617lbs),Tin pen is suitable for carrying in a pocket..
  • 【Low melting point:】 361F/183C. Easy to solder, smooth flow, fast soldering speed and firm solder joints..
  • 【Electronic solder Application:】Rosin core solder wire for-solder for electronics Have Very good soldering ability, especially the repair of electrical equipment such as circuit boards,electronics，IC, home improvement, cable TV, radio/sterro,toys etc DIY..
Check Stock

AUSTOR 6 Pack 60-40 Rosin Core Solder, Solder Wire Tin Lead Electrical Soldering Tools Diameter 0.8mm, 20g

  • High quality: good solder ability in both electrical conductivity and thermal conductivity, working quickly, and suitable for various kinds of soldering iron.
  • Easy to use: flows well and heats evenly, the melting point of soldering iron wire is 185°C - 190°C (365°F - 374°F).
  • Relative parameters:60% Tin and 40% Lead are apply for electronic assembly perfectly. 1.8% flux is good for soldering, diameter 0.8mm is good joint and avoid components overheating.
  • Easy to carry: you can take the solder wire anywhere in your pocket. And the plastic tube protect solder from dirt and moisture(WARNING: This product can expose you to lead, which is known to the State of California to cause birth defects or other reproductive harm. For more information go to the official Proposition 65 Warnings Website).
  • Wide application: the rosin core solder wire is designed for electrical repairs, such as radios, TVs, VCRs, stereos, wires, motors, circuit board and other electronics devices.
Check Stock

Solder Wire and Rosin Paste Flux Kit - 60-40 Tin Lead Rosin Core Solder Wire (0.6mm, 100g) and Rosin Paste Flux for PCB Electrical Soldering and DIY from Plusivo

  • Solder Wire: Included in the kit is a high quality 100 grams 60-40 (Sn/Pb) Tin - Lead rosin core solder wire alloy with 0.6mm diameter and 1.6% flux content commonly used for wiring appliances, DIY projects, 3D printers and other electronic projects or electrical and electronics soldering and repairs.
  • Rosin Paste Flux: This high-quality rosin flux soldering paste facilitates the flow of solder, thus increasing the efficiency of the soldering process and is just right for your small DIY soldering projects..
  • BONUS Items: Aside from the solder wire and rosin paste, this kit also includes 2 mini screwdrivers and two 22 AWG Wire tinned copper PVC jacket, a great addition to a very simple and affordable kit for soldering..
  • Durable Carton Box: All items are neatly packed inside a durable carton box to keep them organized, secured, and easy to carry and transport anywhere..
  • Satisfaction Guarantee: The Solder Wire and Paste Kit is backed by the manufacturer’s 30-day money-back guarantee and lifetime customer support, ensuring the customers’ high level of satisfaction..
Check Stock

Electrical Solder Wire Lead Free Rosin Core Flux 2.5% Electronic Soldering Diameter 0.04in 1mm No Lead 1.76oz 50g Sn99 Ag0.3 Cu0.7 Flow RoHS

  • ROSIN CORE- easy for soldering with rosin core, the flux 2.5% better than others with 2.0% on the flowability.
  • LOW MELTING POINT- the melting temperature is about 419 Deg.F, suitable for all soldering tools.
  • ROHS COMPLIANT- Pb free, good for environmental protection.
  • WIDELY APPLICATION- the 0.04in diameter solder wire is common to solder most electronics components or wire, ideal for electrical soldering, repairing, diy.
  • QUALITY SOLDER- Made with Sn99, Ag0.3 and Cu0.7, the silver 0.3% is important for electric conductivity.
Check Stock

15 PCS WELLER ST Replace Soldering Tips use for WELLER SP40L SP40N WP25 WP30 WP35 WLC100 Solder Iron Handle Tip Brand ACE

  • WELLER ST Series Replace Soldering Tips Lead Free Solder Iron Tips, Handle Tip, Solder Bit, Pencil Tip.
  • WELLER SP40L,SP40N,WP25,WP30,WP35,WLC100 Solder Station Iron Handle Tip (the base is 6mm diameter).
  • ST-D08,D12,D16,D24,D32,D42,B,I,SK,K,J,C1,C2,C3,C4,C5 (Replace ST1/ST2/ST3/ST4/ST5/ST6/ST7/ST8).
  • High Quality with Long Life Time Soldering Tips and Rapid Temperature Recovery.
  • Conical, Screwdriver, Round, Bevel, Bent, Chisel, Knife shapes helps when soldering on different projects, No Matter for precision electronics but....
Check Stock