Reviews Solar Marine Inflatable Boat

EZ-Xtend Pontoon Ladder Pull Up Strap Using Snap Hook System - Made with Heavy Duty 4500 LB Breaking Strength 1\ Black Polyester Webbing, Stainless Steel Snap Hook, and Lifetime Thread

  • Specially designed for AQUOS Backpack Series 7.5ft / 8.8ft / 10.2ft inflatable pontoon boat motor mount..
  • Engineering grade composites component with hardware for installation..
  • The size of the transom board is about 10 x 4.7 x 1.18 inch..
  • Made of marine grade wood and marine grade waterproof paint..
  • Recommend engine capacity for 7.5ft inflatable pontoon boat is 55LBS.
  • For 8.8 ft Inflatable Pontoon Boat is 3HP.
  • For 10.2ft Inflatable Pontoon Boat is 4HP..
Check Stock

Sailortenx Boat Fenders 4 Pack 4.5'' x16'' Inflatable Ribbed Marine Boat Bumpers with Fender Lines 6.5 ft Needles and Pump for Twin Eyes Boat Fenders Bumpers for Docking Fenders Black Use to Yacht Etc

  • [DURABLE MATERIAL] Ribbed boat fenders for docking is made of high quality grade UV-resistant PVC, the marine ribbed Inflatable Fender comes with ribbed on all sides for extra protection..
  • [FEATURES] Inflatable ribbed boat fenders 4 pack feature great buffer effect, the twin eyes boat fender help to protect boats and dock from damage caused by the heavy collision between hard surfaces..
  • [SCIENTIFIC DESIGN] Inflatable ribbed marine fenders eyelets is integrated with the body, boat bumper 4 pack can hung vertically or horizontally, help the boat bumpers fenders attach to boat firmly..
  • [WHAT YOU GET] 4 Pack ribbed boat fenders 4.5'' x 16'' boat fenders, 4 inflating needles, 4 fender ropes (6.5ft length) and 1 hand pump, available: white/black/blue boat bumpers for docking 4 pack black.
  • [MULTI USAGE] The dock fender for boats recommended use to boat size around 20 ft yachts, sailing boats, rowing boats etc..
Check Stock

Xximuim Inflatable Boat Air Valve,2PCS Inflatable Boat Replacement Caps Boat Spiral Air Plugs 0ne-Way Inflation Replacement for Inflatable Raft Boat Kayak

  • 【High Quality】 The inflatable marine valve is made of high-quality, high-density ABS plastic, which is strong, corrosion-resistant and durable..
  • 【One-way Inflation】This valve is a one-way inflation valve, suitable for rapid inflation.The valve cover ensures air leakage..
  • 【Design】The fine design of durable air valve with a valve cap ensures anti-leak inflation.The diameter/length of Threaded part is 20mm / 17mm....
  • 【Good Component】Inflatable Boat Valve comes in pair, the Inflatable Tube is a good replacement accessory for your inflatable boat.After inflation....
  • 【Widely Application】Our inflatable boat air valve replacement spiral air plugs fits most inflatable boat, raft, rubber dinghy, etc.But not suit....
Check Stock

Dreizack Boat Fenders for Docking 4 Pack 6.5''x23'' Boat Bumpers with 4 Ropes,Air Pump,Needles and Storge Bag,Thickened Material,Perfectly Protect The Boat

  • 【New Products Promotion！】【STRONG CUSHIONING】3.8mm thicker material,full-length molded ribbed,oval shape design enhance the puncture and abrasion resistance of the boat fenders.
  • 【DOUBLE EYELET DESIGN】Reinforced molded double holes,it can be hung vertically or horizontally. Equipped with 4 solid braided MFP fender lines(6ft),less kinked than typical boat fender lines,helping to keep boat fenders at correct height you need.
  • 【MARINE GRADE EMBOSSED VINYL】Boat fenders for docking are made of marine vinyl rotomolding,UV stabilized and chemically resistant. It can be protected from the effects of salt water or discoloration of shipcleaner.
  • 【EASY TO INFLATABLE】With a pump and 4 needles.Each of pratical boat bumper has an inflatable hole.Seamless one-piece construction is convenient to operat,easily inflate or deflate the fender to desired pressure.
  • 【EASY TO STOAGE】Dreizack Boat bumpers are recommended to use for medium size boats that are no longer than 30 feet.With a storage bag that can save you the trouble of storage.
Check Stock

TotalBoat Epoxy Primer Thinner 200 Marine Solvent Quart

  • Marine solvent specially formulated for thinning or reducing TotalBoat TotalProtect, TotalBoat Aluminum Boat Barrier Coat, and TotalBoat 2-Part Epoxy....
  • Perfect for brush, roller, or spray applications.
  • Ideal surface prep solvent wipe for rubberized inflatable materials prior to applying TotalBoat Inflatable Boat Paint.
  • Makes it easy to remove paint from tools and equipment after painting is done.
  • Available in Quart size. 100% made in the USA. Use only with the TotalBoat products specified.
Check Stock

Newport Vessels 10ft 6in Inflatable Dinghy Boat Transom Sport Tender - 5 Person - 15HP USCG Rated, White/Gray

  • USCG rated triple layered 0.9mm/1,100 denier specialty coated PVC, marine wood flooring Inflatable sport boat tender..
  • Includes: Aluminum Framed Marine Wood Flooring, 1 aluminum bench seat, 2 aluminum oars, carrying & storage bag, foot pump, drain plug, towing D-rings, topside D-rings for Bimini and accessories, carrying handles, oar locks and oar holders.
  • Materials: Boat: Triple Layered 0.9mm / 1,100 denier Polyester reinforced and anti corrosive coated PVC. Material ensures protection against corrosion, sun, salt, and all destructive elements..
  • Recommended tube pressure: 3.6 PSI. Materials: Floor: 24mm thick aluminum framed custom hard marine coated plywood floor..
  • Dimensions and Specificatons: Model: The Newport, Inflated Length: 10 ft 6 in, Tube Diameter 18 in, Inflatted Width: 5 ft, Chambers: 4, Weight: 123 lbs, Max Power: 15hp, Max Load: 1,248 lbs, Max Persons: 5, High pressue inflatable Keel & V hull..
  • (Newport) DIMENSIONS & CAPACITY: Model: Newport. Length: 10 ft 6 in. Tube diameter: 18 in, Inflated width: 63 in. Chambers: 3 + 1 keel. Max Power: 15HP. Max Engine Weight: 105 lbs. Outboard Shaft: Short 15”-17”. Max Load: 1248 lbs, Max Persons: 5..
Check Stock

14 Gauge Marine Wire,100ft 14 AWG Duplex Marine Grade Wire Tinned Copper Boat Cable,Marine Electrical Wire for Boat/Marine/Automotive etc Outdoors Wiring

  • High Quality:Our marine grade wiring is made of real copper strands and tinned to make sure conduct well,resist corrosion, high durability,flexibility,stability for a long-lasting performance.
  • The heavy gauge electrical boat marine wiring is designed with a thick protective outer insulation coating makes it perfect for heavy-duty marine and other harsh external outdoor wiring projects.
  • Multi Use: the 14 gauge marine wire use in pontoon boat/bass boat/boat trailer/ fish finder/truck/RV/Van/ATV trailer electrical system:wiring light (spotlight,underwater light,flood light, navigation lights,headlight), solar inverters, shore power,bilge pump,extend new bank charger leads, speaker wire,electric brake wires, radio stereo, alarm etc.
  • Up to standard of UL 1426 ,SAE, ABYC etc ,our marine speaker wire can perform the marine and other harsh environments of corrosion,open flame,extreme temperature fluctution,heat-shock,deformation, resist abrasion.
  • Marine electrical wire Spec:white PVC jacket, red&black conductor sheaths, tinned & stranded True 14 AWG 14/2 flat copper wire,14 awg wire is insulation rated to 600v, 105 degrees C dry, and 75 degrees C wet.
Check Stock

JOIERW Boat Launching Wheels, Aluminum Alloy Transom Launching Dolly with 12" Flatfree Airless Wheels for Inflatable Boats, Rubber Boats

  • 【High Quality】: JOIERW inflatable boat launching wheel mainly part is made with 40x40mm 3mm thickness high quality anodizing aluminum and axle shaft is with 5mm thickness which is much thicker than similar model on market..
  • 【Heavy Duty & Versatile】: JOIERW boat launch wheels can carry a craft weighting up to 220lb.And it is adjustable. Suitable for inflatable boats, rubber boats, Assault boats..
  • 【Corrosion-Resistant】: JOIERW launch dolly wheel is made completely from marine grade aluminum with stainless steel hardwares which is rust proof..
  • 【Puncture Proof Wheel】: JOIERW launch wheels for inflatable boat with 12inch airless tires suitable for all types of terrain, allows movement smoothly across different surfaces such as sand, gravel, concrete floor or wooded areas..
Check Stock

Acelane Solar Inflatable Lantern Solar Lights Collapsible Camping Lamp Rechargeable Waterproof for Outdoor Backpacking Fishing Boating Patio Party Poolside Travel Hurricane Emergency Survival Gear

  • ☀️【100% Solar Lantern】Built-in 10 LEDs and 1000 mah rechargeable lithium battery, Acelane Inflatable Solar Light is powered by the direct....
  • ☀️【Inflatable & Safe】It is shatterproof, dust-proof, collapsible, floatable, would not easily get broken/crushed. Equipped with over....
  • ☀️【Waterproof & Durable】Our solar boat lights with high quality waterproof PVC enclosure to ensure its everlasting durability from water or....
  • ☀️【3 Brightness Settings】Our inflatable camping lantern has 3 modes allows you to adjust the brightness. First press for week illumination (40....
  • ☀️【Versatile Using】With nature glow and well-balanced design, it helps you to achieve the desired illumination in different conditions, brings....
Check Stock

10 Gauge Marine Wire,50ft 10 AWG Duplex Marine Grade Wire Tinned Copper Heavy Duty sheathed Wire for Marine/Boat/Automotive/RV/Camper/Trailer

  • High Quality:Our marine grade wire is made of tinned copper to make sure good conductivity,Anti-corrosion, high durability,flexibility,stability for a long-lasting performance.
  • The marine grade duplex tinned copper wire is designed with a thick protective outer insulation coating makes it perfect for heavy-duty marine and other harsh external outdoor wiring projects.
  • Multi Use: the 10 gauge marine electrical wire use in pontoon boat/bass boat/boat trailer/ fish finder/truck/RV/Van/ATV trailer electrical system:wiring light (spotlight,underwater light,flood light, navigation lights,headlight), solar inverters, shore power,bilge pump,extend new bank charger leads, speaker wire,electric brake wires, radio stereo, alarm etc.
  • Up to standard of UL 1426 ,SAE, ABYC etc ,our boat marine power wire can perform the marine and other harsh environments of corrosion,open flame,extreme temperature fluctution,heat-shock,deformation, resist abrasion.
  • Maine wiring Spec:white PVC jacket, red&black conductor sheaths, tinned & stranded True 10 AWG 10/2 flat copper wire,10 awg wire is insulation....
Check Stock

The Dinghy Song

  • WHY NEWPORT: The crisp white PVC fabric of a Newport dinghy will earn you regular compliments at the dock, and makes you easy to spot while flying across the water at 15-20mph (depending on model and horsepower). Inflatable tail tubes allow for great stability and quick take offs, while the inflatable keel allows for excellent planing and steering. Very portable and easy to assemble or disassemble in 10-15 minutes.
  • FEATURES: Electric trolling motor compatible. 3-20hp Outboard Compatible (depending on model). Air Keel creates a shaped V hull for easy planing and improved steering. Sturdy carrying handles. 3x Stainless steel bow D-rings for towing. D-rings on bow/tail tubes for bimini and accessory attachments (not pictured). Self bailing transom drain valve. Easy grab rope plus splash guard around edge limits water spray inside boat.
  • PREMIUM QUALITY: Hull made from high quality crisp white PVC fabric w/ UV treatment, .9mm/1100D. Floor made from aluminum framed marine grade coated plywood provides a solid and stable surface for standing, casting, and planing. Seams are HEAT WELDED using the latest technology.
Check Stock

Dinghy Sailing Race Control

  • WHY NEWPORT: The crisp white PVC fabric of a Newport dinghy will earn you regular compliments at the dock, and makes you easy to spot while flying across the water at 15-20mph (depending on model and horsepower). Inflatable tail tubes allow for great stability and quick take offs, while the inflatable keel allows for excellent planing and steering. Very portable and easy to assemble or disassemble in 10-15 minutes.
  • FEATURES: Electric trolling motor compatible. 3-20hp Outboard Compatible (depending on model). Air Keel creates a shaped V hull for easy planing and improved steering. Sturdy carrying handles. 3x Stainless steel bow D-rings for towing. D-rings on bow/tail tubes for bimini and accessory attachments (not pictured). Self bailing transom drain valve. Easy grab rope plus splash guard around edge limits water spray inside boat.
  • PREMIUM QUALITY: Hull made from high quality crisp white PVC fabric w/ UV treatment, .9mm/1100D. Floor made from aluminum framed marine grade coated plywood provides a solid and stable surface for standing, casting, and planing. Seams are HEAT WELDED using the latest technology.
Check Stock

Acouto 25mm 1inch Stainless Steel Marine Boat Hand Rail Fitting 60 Degree Round Base automotive-body-tub-rail-armor

  • 100% Brand New and High Quality Marine Boat Hand Rail Fitting 60 Degree Round Base.
  • Adopt fine grinding mirror polishing, precise, resistance, bright and with good flatness.
  • Made of heavy duty 316 marine grade stainless steel, sturdy and durable, long time to use.
  • All of our products are strict tested to ensure the best quality, more safer to use.
  • Widely used in ship, boat, yacht, inflatable boats, business boat and etc.
Check Stock