Reviews Solar Controller Circuit

QWORK Solar Charge Controller, 30A Adjustable Parameter Backlight LCD Display and Timer, 1 Piece

  • 30A Solar Charge controller: LCD display, one-click operation, automatic disconnection when the battery is full, automatic memory data storage..
  • Wide Application: Ideal for solar power generation systems, smart homes, solar chargers, solar ventilation systems, solar light boxes, solar billboards, solar warning lights and so on..
  • Multi-Layer Protection: Built-in overcurrent, short circuit protection, reverse connection protection and open circuit protection are all automatic recovery without damaging the controller..
  • Light Control and Time Control: The controller has light control and time control..
  • Three-Stage PWM Regulation Charging: Three-stage PWM regulation charging mode is adopted, including direct charging, lifting charging and floating charging. The controller is used to realize efficient and fast intelligent charging, and the service life of the battery is effectively prolonged..
Check Stock

ECO-Worthy 30A Solar Charger Controller Solar Panel Battery Intelligent Regulator with Dual USB Port Auto 12/24V PWM Positive Ground…

  • [30A Solar Charge controller]: the solar charger controller compatibility with 12V 24V system. Discharge Current: 10A,build-in industrial micro controller, automatically manage the working of solar panel and battery in solar system. Dual USB output 5V/2.5A (max), to support mobile phone chargeing.
  • [Multiple Protection Functions]: ECO-WORTHY solar controller has short-circuit protection, open-circuit protection,reverse protection, over-load protection. Fully 3-stage PWM charge management, improve system efficiency and prolong the life span of the battery.
  • [Battery Type]: The charge regulator is suitable for lead-acid batteries, gel batteries and lithium phosphate batteries. For protecting the lifespan of your battery, once the voltage of the battery drop below 8V, the solar controller will turn off automatically.
  • [LCD Display]: Comes with a display that can clearly indicate the status and data, it can be conveniently switched modes and parameter configuration, suitable for home, industrial, commercial etc..
  • [Easy to Install and Operate]: The charge controller should connect the battery first, then the solar panel, and finally the load! The disassembly sequence is contrary to the wiring order.Dual mosfet Reverse current protection, low heat production. ( N....
Check Stock

POWOXI Solar Panels Charge Controller, 8A Battery Regulator for 12V Solar Battery Charger, Solar Battery Maintainer and 12 Volt Batteries Power Kit

  • 【 APPLY TO 12V SOLAR PANELS】:The 8A solar controller is used only for 12V solar panels and 12V batteries. The solar panels can convert light energy into electric energy stored in batteries which will be protected by the solar controller..
  • 【THE MAXIMUM INPUT OF SOLAR ENERGY IS 130W】:The maximum power of solar panels is130W, the maximum voltage 22V, and the maximum current 8A. It is suitable for 12V rechargeable batteries. In order to lengthen its service life, please do not overload..
  • 【EASY TO MONITOR THE LED INDICATOR LIGHTS】: The solar controller integrates two LED lights, both green and red indicator lights on (fully charged) and only the red one (charging). The product also provides overcharge, over-discharge, overload protection, as well as short-circuit and reverse-connection protection..
  • 【HOW TO CONNECT】: Before connecting, please identify the correctness of positive and negative polarity, our controller red is positive, black is negative, please connect positive to positive, negative to negative, we have attached polarity converter, if the product does not work, please contact the after-sales email, we will reply you in time..
  • 【MULTI-PROTECTION 】:The product provides overcharge, over-discharge, overload protection, as well as s....
Check Stock

Dyson 914641-01 Circuit Board, PCB Power Control DC24, Black

  • Advanced glass fiber material: The solar light string controller module is made of glass fiber material, with fine workmanship and durability..
  • Intelligent working state: The solar panel recharges the battery when the light is on during the day. When there is no sunlight in the evening, the LED light is automatically turned on, the battery automatically recharges during the day and night..
  • Light board: 3.0-3.2V lamp beads in parallel.
  • The circuit board includes installation instructions: Solar light string controller circuit board with power switch and lighting mode switch, easy to operate. This replacement circuit board is easy to install and setup..
Check Stock

EpRec 30A 12V 24V PWM Solar Charge Controller Compatible with Lead Acid/ Lithium-ion/ Lithium Iron Phosphate Battery

  • 【Upgraded Solar Panel Controller】This 30a solar charge controller compatibility with 12V 24V system.Fully 4-Stage PWM charge (Boost, ABS, Equalization,Float),the power MOSFET is used as and electronic switch without any mechanical switches and equipped with industrial-grade STM 8 microprocessor to prolong your battery life cycle..
  • 【LCD Display】Backlight LCD display PV/Battery/Load charge and discharge parameter.Dual USB can give your electronic product max 5V 2.5A..
  • 【Intelligent Control】This solar controller fit for lithium-ion/ lithium iron phosphate /Lead-acid batteries(OPEN,AGM,GEL,) with mutiple load timer(Load should be DC).It has a wide range of applicability and automatically identifies daytime/night.For protecting the lifespan of your battery, once the voltage of the battery drop below 8V, the solar controller will turn off automatically..
  • 【Safe to Use】PWM charge controller Protection:Dual MOSFET Reverse current /over heat /Under-voltage discharge discharge /short-circuit /open-circuit / over-load /over-charging protection.more safe for home, industrial,commercial etc..
  • 【Customer First】12 months honor warranty from EpRec and 24hrs after service.Your satisfaction is our priority..
Check Stock

30A Solar Charge Controller, Solar Panel Charge Controller 12V 24V Dual USB Charge Regulator Intelligent, Adjustable Parameter Backlight LCD Display and Timer Setting ON/Off Hours(30A)

  • ☀【Dual USB】: This 30a solar charger controller compatibility with 12V 24V system. Fully 4-Stage PWM charge (Boost, ABS, Equalization, Float), the power MOSFET is used as and electronic switch without any mechanical switches and equipped with industrial-grade STM 8 microprocessor to prolong your battery life cycle..
  • ☀【LCD Display 】: Backlight LCD display PV/Battery/Load charge and discharge parameter. Adjustable Floating voltage/LVD/LVR/Load Timer for this charge controller according to needs.ADD Feature: Charge and Discharge Current, cumulative power generation and discharge power query.
  • ☀【Lead-acid Batteries】: Solar Charge controller is only suitable for lead-acid batteries: OPEN, AGM, GEL, not for nickel hydride, lithium, Liions, or other batteries. For protecting the lifespan of your battery, once the voltage of the battery drop below 8V, the solar controller will turn off automatically.
  • ☀【PWM Charge Controller Protection】:Dual MOSFET Reverse current /overheat /Under-voltage discharge discharge /short-circuit /open-circuit / over-load /over-charging protection.more safe for home, industrial, commercial etc.
  • ☀【Easy to Install and Operate】: The charge controller should connect the battery first, then the solar panel, an....
Check Stock

Thlevel 30A Solar Charge Controller 12V/24V Solar Panel Charger Controller with Adjustable LCD Display and Dual USB Port for Open AGM Gel Lead-Acid Batteries

  • 【Upgraded solar panel controller】 Solar charge controller 30a build-in industrial microcontroller for automatical management, memorizing various....
  • 【Safe to use】 Over-current and short-circuit protection, inverse connection protection, low voltage and overcharge protection. 12v solar charge....
  • 【LCD display】Solar panel charger controller with big LCD display, you can also switch modes and adjustable parameter, clearly indicate the status,....
  • 【Scope of application】 The solar charge controller is only suitable for lead-acid batteries: OPEN, AGM, GEL. Do not support any other batteries..
  • 【Easy to install】 The mppt solar charge controller should connect the battery first, then the solar panel, and finally the load!.
Check Stock

Liftmaster/Chamberlain/Sentex 41as050-1 Receiver Logic Board Assembly

  • There are 8 lighting modes for you to choose: 1: 2-8 function cycle,2: Star flash,3: Double flash,4: One way fades in and out,5: 4 single flashes, 4 double flashes,6: All fade in and out,7: 4 single flashes,8: All on..
  • It can be connected to a 1.2V nickel-metal hydride battery and a 2V solar panel. The maximum charge current is 400mA and the discharge current is 100mA..
  • Solar light string controller circuit board with power switch and lighting mode switch, easy to operate..
  • The controller module can be used for 100LED solar string lights, solar copper wire lights, solar studs and other lamps..
  • The solar light string controller module is made of glass fiber material, with fine workmanship and durability..
Check Stock

POWLAND 10A Solar Charge Controller, PWM Solar Charge Controller 12V/24V, Compatible with Lead-Acid Batteries, Adjustable LCD Display, Solar Panel Charge Regulator with Dual USB Port

  • CONNECTED BATTERY TYPE:PWM Solar controller 20amp compatible with 12V/24V battery system,it’s only suitable for lead-acid batteries:OPEN,AGM,GEL,not for other batteries.Do not connect other types of batteries (nickel hydride and lithium irons are not supported).
  • SOLAR CHARGE CONTROLLER:for regulating solar modules,do not connect other charging source to the charge regulator.The voltage of Maximum solar input:50V for 24V battery and 25V for 12V battery.
  • LCD DISPLAY & DUAL USB PORTS:Let you know the status and data with LCD Display.You can also switch modes and parameter configuration conveniently and can use this controller in a different place like home,industrial,commercial,etc. USB output 5V/2.5A(max),to support mobile phone charging.
  • PROVIDE MULTI PROTECTION:With open-circuit protection,short-circuit protection,inverse connection protection,over load protection,this solar charge controller will help you improve the system efficiency safely and prolong the life span of the battery.
  • WARRANTY:We provide you 12-month warranty and lifetime technique support.We have professional after-sales engineers to solve your problems.If you have any questions,please contact the seller.
Check Stock

EEEKit 20A Solar Charge Controller, 12V/24V Solar Panel Battery Intelligent Regulator with Dual USB Port PWM Auto Parameter Timer Setting Adjustable LCD Display, Blue

  • 20A SOLAR CHARGE CONTROLLER: 20A Solar panel battery intelligent regulator are UL 1741 certified, the solar charger controller compatibility with 12V 24V system. Discharge current: 10A, build-in industrial microcontroller, automatically manage the working of solar panel and battery in solar system. Dual USB output 5V/2.5A (max), to support mobile phone charging..
  • SIX PROTECTION FUNCTIONS: 20A solar controller has Short-circuit protection, Overload protection, Over Current Protection, Overcharge protection, Under-voltage protection, Over-voltage protection. Fully 3-stage PWM charge management, improve system efficiency and prolong the life span of the battery..
  • BATTERY TYPE: The charge regulator is only suitable for lead-acid batteries: OPEN, AGM, GEL, it is not suited for nickel hydride, lithium, Liions, or other batteries. In order to protect the lifespan of the battery, once the voltage of the battery drop below 8V, the solar controller will turn off automatically..
  • FUNCTIONAL LCD DISPLAY: Intuitive LCD display that can clearly indicate the status and data is able to switch modes and parameter configuration, suitable for home, industrial, commercial, etc..
  • EASY TO USE: The charge controller should connect the battery first, then the solar panel, finall....
Check Stock

ECO-WORTHY 10W PV Polycrystalline Solar Panel System kit W/ 3A Charge Controller & 30A Battery Clips

  • BATTERY CHARGE: Perfect for 12-volt battery charging.
  • CHARGER CONTROLLER: standby current 0.15mA for 3A 12V PWM battery charge controller. It offer overcharge and over discharge protection for the battery.
  • SPECIFICATION: Open-Circuit voltage (Voc): 20.6 Volt, optimum operating current (Imp): 0.58 Amps, short-circuit current :(Isc): 0.69 Amps. High modules conversion efficiency.
  • WATERPROOF& PORTABLE: Water-proof solar panel with 0.71 inch thickness resistant aluminum frame which allows the panels to last for 20 years.
  • PACKAGE CONTENTS: 1 x 13.26” by 8.04” by 0.71” solar panel: 1 x insulated battery clips with 78” extension wire: 1 x battery charger controller.
Check Stock

SOLPERK 10A Solar Charge Controller Waterproof Solar Panel Controller 12V/24V PWM Solar Panel Battery Intelligent Regulator for RV Boat car ，with LED Display

  • ✔️【Waterproof Solar Charge Controller】IP67 waterproof, suitable for outdoor use. Automatically identify voltage, 12V Max power: 150W, 24V Max power: 300W. The maximum current is 10A. Compatible with various 12V/24V deep-cycle batteries, such as AGM, GEL, Flooded. Adopting brand MCU chips to realize fast intelligent control and ultra-low standby power consumption..
  • ✔️【Intelligent protection】Intelligent 3-stage PMW charging improves charging efficiency. The solar controller not only extends battery life and improves system performance, but also has multiple protection functions: Battery under-voltage, over-voltage, output overload, short circuit, battery, solar panel anti-back connect protection..
  • ✔️【Indicator Monitoring】You can understand its current working status through the three indicators on the solar panel charge controller. Load normal output: green light is always on.
  • battery is normal: green light is always on.
  • solar panel is charging normally: red light is always on..
  • ✔️【Easy to install and operate】The solar panel controller adopts SAE port, plug and play. A manual with clear connection steps is included. There are 2 pre-drilled holes on the controller, you can install it anywhere according to your needs!.
Check Stock

ExpertPower 200W 12V Solar Power Kit | 200-watt Mono Rigid Panel + 12V 55Ah Gel Battery + 20A Solar Charge Controller, for RV, Cabin, Off-Grid DIY, Solar Projects and More

  • Powerful Output: Fully charge the battery in 5 hours on a good sunny day..
  • Smart and Safe: The 20A controller is built with a high-speed control chip with reverse protection, open-circuit protection, temperature protection, and short-circuit protection that all come with self-recoveries..
  • User Friendly: Large LCD screen presenting from solar charging data to battery status to load controls. Adjustable parameters make the system just suitable for you..
  • Solid Quality: Panel is made with highly efficient monocrystalline solar cells protected by tempered glass and aluminum frame, which withstand high wind (2400Pa) and snow loads (5400Pa)..
  • This kit includes two 100W Monocrystalline Solar Panel, one 20A PWM Solar Charge Controller, one 12V 55AH GEL Deep Cycle Battery, one pair of Y-Branch MC4 Solar Cables, one pair of 10ft 12AWG MC4 Solar Cables, one pair of 6ft 12AWG Battery Cables, and two sets of Solar Panel Mounting Brackets..
Check Stock