Reviews Software For Flashforge Creator Pro

Interface Plate Keypin - Wanhao Duplicator i3 Plus/Maker Select Plus

  • Compatibility: the printer nozzles fit for FlashForge Creator Pro, FlashForge Creator X, FlashForge Dreamer, Dremel Idea Builder, PowerSpec 3D Pro, PowerSpec 3D X, Wanhao Duplicator 4S, Wanhao Duplicator 4X, Wanhao i3, etc..
  • Package include: totally 8 pcs MK10 Nozzle, 7 sizes: 1 x 0.2mm, 1 x 0.3mm, 2 x 0.4mm, 1 x 0.5mm, 1 x 0.6mm, 1 x 0.8mm, 1 x 1.0mm..
  • Size: the 3D printer nozzles, Out Thread: M7, Filament Diameter: 1.75mm, Output Diameter: 0.2mm, 0.3mm, 0.4mm, 0.5mm, 0.6mm, 0.8mm, 1.0mm..
  • Material: the 3D printer nozzles are made of premium brass, sturdy and high temperature resistance, smooth silk, connect with M7 out thread, easy to use..
  • Aokin 3D printer nozzles use high-quality raw materials and fine workmanship, if you have any questions about our product, please feel free to contact us, we will do our best for you..
Check Stock

Brand-New MK10 Hotend Kit for 3D Printer M7 Brass Nozzle and Throat with PTFE Tube and Aluminum Heater Block Fit with M3 and M4 Thermistor

  • 100% Brand New and All parts are tested and quality controlled prior to shipment..
  • Compatible with: MK10 hotend M7 thread aluminum heater block, such as FlashForge Creator Pro, FlashForge Creator X, FlashForge Dreamer, FlashForge Finder, FlashForge Inventor, Dremel Idea Builder, PowerSpec 3D Pro, PowerSpec 3D X, Wanhao Duplicator 4S, Wanhao Duplicator 4X, Wanhao i3, Monoprice maker select plus, Qidi tech, Cocoon Create, etc..
  • Brass material advantage: The heat conductivity of brass is 7 times as high as that of stainless steel. MK10 hotend structure only allows filament to have little contact with the nozzle. The material of the nozzle must be brass to ensure filament’s temperature is the same as the thermistor, so it make the melt plastic more smooth. But the heat conductivity of stainless steel is so poor, it is unscientific and irrational used on MK10 nozzle..
  • Material: Nozzle is brass. Throat is stainless steel. Heater block is aluminium alloy..
  • Package includes: 1 piece 0.4mm nozzle with M7 thread,1 piece throat with 1.75mm PTFE tube , 1 piece aluminum heater block as shown in the pictures..
Check Stock

MK10 3D Printer Extruders Kit 5 Pcs Aluminum Heater Block + 1.75mm Extruder Throat Tube M7 Thread + Cotton Heater Tape for 3D Printer Wanhao Filament

  • ✹✹ High quality copper and stainless steel, ensure concentricity and roundness.
  • Designed for many common types of 3D printers, solid aluminium construction with aperture..
  • ✹✹ Aluminium Heater Block for Extruders in 3D-Printers. A drilling with an M4 screw is scheduled for the optimal fixing of the Cartridge Heater. The Thermistor is fixed by means of a M4 grub screw in order to avoid slipping or loosening. The heating block is equipped with an M7 thread for the Nozzle..
  • ✹✹ Compatibility: Fit with MK10 hotend aluminum cooling block, such as DIY MK10 3D printer, FlashForge Creator Pro, FlashForge Creator X, FlashForge Dreamer, Dremel Idea, Builder PowerSpec 3D, Pro PowerSpec 3D X, Wanhao Duplicator 4S, Wanhao Duplicator 4X, Wanhao i3, etc..
  • ✹✹ 2mm thick cotton heater tape for heat preservation, keep heater block and consumable work better..
  • ✹✹ Any questions, you can tell us and we will give you a satisfied solution!.
Check Stock

Extruder Thermistor - Monoprice Maker Select Plus - Wanhao Duplicator i3 Plus 3D Printer

  • 【Independent dual extruder】Double efficiency of the mirror printing. Creator Pro2 make it come true that more complicated prints can be printed perfectly.
  • 【Heating bed】 Rapid steady heating prevent model warping much easier to take down models.It's suitable for various 3d printer filament PLA,ABS,PETG,TPU etc.
  • 【Anti-scrape Design】Avoid scrap in the process of printing to get better printed results.
  • 【Out of box】Creator Pro is suitable for industrial design,tool design,architecture designer,mechanical designer etc.
  • 【What you get】Flashforge 3d printer Creator Pro2 12 months warranty, lifetime technical assistance and 24 hours professional customer service.
Check Stock

FlashForge Creator Pro2 3D Printer, Independent Dual Extruder W/2 Spools, Metal Frame Structure, Acrylic Covers, Optimized Build Platform, Higher Productivity and More Possibilities

  • Easy to Start: Simple bits of assembly for quick start-up, set up and start printing within minutes after some small manual assembly, build volume: 200*148*150mm..
  • Independent Dual Extruders: Flashforge Creator Pro2 3D Printer enable diverse 3D printing modes including Mirror Mode, Duplicate Mode, Dual Filament Printing Mode and Dual Color Printing Mode. Brings more possibilities, greatly improves 3d printing productivity..
  • Unique Design: 3.5 inch touchscreen with anti-scrape design ensures final 3D objects with clean neat smooth surface, extend build plate life span and lower maintenance cost, also handle for easy machine moving..
  • Widely Filaments Support: PLA, ABS, PETG, etc. Creator Pro 2 prints with water soluble filament PVA, etc..
  • Warranty and Service: All Flashforge 3D printers are provided lifetime technical assistance and 12-months 24 hours quick response warranty..
Check Stock

FlashForge ABS Filament - Red Color - 1.75 MM

  • Compatible Flashforge Printers: Creator Max, Creator Pro, Guider 2, Guider 2S.
  • Compatible with all FDM and FFF 3D printers that print with 1.75 mm diameter of filament.
Check Stock

FlashForge PLA Filament - Blue Color - 1.75 MM

  • Compatible Flashforge Printers: Creator Max, Creator Pro, Guider 2, Guider 2S.
  • Compatible with all FDM and FFF 3D printers that print with 1.75 mm diameter of filament.
Check Stock

FlashForge ABS Filament - Pink Color - 1.75 MM

  • Compatible Flashforge Printers: Creator Max, Creator Pro, Guider 2, Guider 2S.
  • Compatible with all FDM and FFF 3D printers that print with 1.75 mm diameter of filament.
Check Stock

FlashForge 3D Printer Creator Pro2 Independent Dual Extruder W/2 Spools Metal Frame Structure Acrylic Covers Optimized Build Platform Works with ABS and PLA

  • 【Independent dual extruder】Double efficiency of the mirror printing. Creator Pro2 make it come true that more complicated prints can be printed....
  • 【Heating bed】 Rapid steady heating prevent model warping much easier to take down models.It's suitable for various 3d printer filament....
  • 【Anti-scrape Design】Avoid scrap in the process of printing to get better printed results.
  • 【Out of box】Creator Pro is suitable for industrial design,tool design,architecture designer,mechanical designer etc.
  • 【What you get】Flashforge 3d printer Creator Pro2 12 months warranty, lifetime technical assistance and 24 hours professional customer service.
Check Stock

FLASHFORGE Hips 3D Printer Filament, 1.75mm (White), 1kg Spool (2.2lbs), Guaranteed Fresh, Dimensional Accuracy +/- 0.02mm, Tangle-Free, Fits Most FDM Printers [Risk-Free]

  • Compatible Flashforge Printers: Creator Max, Creator Pro, Creator 3, Guider 2, Guider 2S.
Check Stock

FlashForge ABS Filament - Clear Color - 1.75 MM

  • Compatible Flashforge Printers: Creator Pro, Guider 2, Guider 2S.
  • Compatible with all FDM and FFF 3D printers that print with 1.75 mm diameter of filament.
Check Stock

Creality Ender 3 Pro DIY 3D Printer with Removable Magnetic Bed and UL Certified Power Supply 8.6

  • Full manufacturer's warranty fulfilled by Flashforge, and free email support provided by expert FlashForge technicians.
  • A sturdy metal frame that is substantially more stable than the Creator's original wood frame.Build volume 8.9 X 5.8 X 5.9 inches.
  • Aviation level aluminum plate with a thickness of 6.3mm guarantee its surface is completely flat and will not warp during heating process.
  • Metal platform support plus 10mm guide rod ensure a precise Z axis movement and prevent platform arm from deforming. Filament Compatibility- PLA, ABS, PLA Color Change, Pearl, ABS Pro, Elastic, PVA, HIPS, PETG, TPE, TPU, Conductive Filament, Flexible Filament, Metal Filled Filament, Wood Filled Filament, and PP.
  • Enclosed chamber insulates and protects ABS prints.Filament Diameter:1.75 mm [0.069 in].
  • Please refer the user manual below for better use.
Check Stock

FLASHFORGE PLA 3D Printer Filament, 1.75mm (Pink), 1kg Spool (2.2lbs), Guaranteed Fresh, Dimensional Accuracy +/- 0.02mm, Tangle-Free, Fits Most FDM Printers [Risk-Free]

  • Compatible Flashforge Printers: Creator Max, Creator Pro, Guider 2, Guider 2S.
  • Compatible with all FDM and FFF 3D printers that print with 1.75 mm diameter of filament.
Check Stock