Makita Brush Set (Makita 9565CV, 9564CV, PW5001C)
- Powerful 13.0 AMP motor delivers more output and variable (2,800 - 10,500) RPM for the most demanding applications.
- SJS technology is a mechanical clutch system that minimizes motor and gear damage.
- Variable speed control dial enables user to match the speed to the application.
- Electronic controller provides constant speed control which automatically applies additional power to the motor to maintain speed under load.
- Electronic controller provides soft-start which is designed to suppress start-up reaction for smooth start-ups and longer gear life.
Check StockMicro-Air EasyStart 364 Soft Starter ASY-364-X20-IP
- The Micro-Air EasyStart 364 Soft Starter ASY-364-X20-IP.
- EasyStart is a one-of-a-kind, custom-developed soft starter for single-phase motors..
- Employs a 4-part start ramp sequence that is self-optimizing, resulting in the lowest possible start-up current..
- EasyStart can deliver 65-75% start current reduction as compared to a compressor's LRA (locked-rotor amperage)..
Check StockMakita GVP01Z 40V max XGT Brushless Lithium-Ion 7 in. Cordless Polisher (Tool Only)
- OUTPOWER: Makita-built brushless motor with variable speed control dial (600 - 2200 RPM).
- Cordless solution for a variety of polishing applications where mobility is important.
- Variable speed dial and trigger (0 - 22200 RPM) enables user to match the speed to the application.
- Soft start suppresses start-up reaction for smooth start-ups and longer gear life.
- Rubberized soft grip provides increased comfort on the job.
Check StockMakita HM1203C 20 lb. Demolition Hammer, accepts SDS-MAX bits
- Powerful 14 AMP motor delivers 18.8 ft.lbs. of impact energy to handle the most demanding applications.
- Constant speed control automatically applies additional power to the motor to maintain speed under load to complete the most challenging jobs.
- Soft start suppresses start-up reaction for more precision and better accuracy.
- L.E.D. service light notifies the user approximately 8 hours before the brushes need to be replaced.
- L.E.D. power light indicates switch failure or cord damage.
- Hard hitting (25.5J), with less weight (20.3).
- Electronic Speed Control Automatically applies additional power to the motor to maintain consistent speed under load for the most challenging jobs.
- Soft Start Suppresses start-up reaction for more control and better accuracy.
- Variable Speed variable speed control dial that enables user to match the speed to the application for greater versatility.
- 12 bit angles settings - Bit can be set at 12 different positions for operating convenience..
Check StockMakita GVP01M1 40V max XGT Brushless Lithium-Ion 7 in. Cordless Polisher Kit (4 Ah)
- OUTPOWER: Makita-built brushless motor with variable speed control dial (600 - 2200 RPM).
- Cordless solution for a variety of polishing applications where mobility is important.
- Variable speed dial and trigger (0 - 22200 RPM) enables user to match the speed to the application.
- Soft start suppresses start-up reaction for smooth start-ups and longer gear life.
- Rubberized soft grip provides increased comfort on the job.
Check StockMakita GA9060RX3 7\ Concrete Surface Planer with Dust Extraction Shroud
- Dust extraction shroud is designed to capture dust during concrete surfacing applications.
- Powerful 15.0 AMP motor delivers 6,600 RPM for optimum durability and performance.
- Soft Start suppresses start-up reaction for smooth start-ups and longer gear life.
- Anti-restart protection is designed to prevent motor start up in the on-power switch position after a power disruption.
- Power light indicates switch failure, cord damage or worn-out motor brushes.
Check StockSuhner 11124203 USG 9-R Electric Straight Grinder, 9000 RPM
- High performance variable speed straight grinder 3800-8300 rpm.
- Electronic soft start for jolt free work.
- Overload protection and soft start to protect the life of the motor.
- Ergonomically designed for fatigue free work.
Check StockMakita GA9040S 9\ Angle Grinder
- Powerful 15.0 AMP motor delivers 6,000 RPM for faster material removal.
- Soft start suppresses start-up reaction for smooth start-ups and longer gear life.
- Rotatable back handle for increased comfort in various orientations.
- Tool-less wheel guard for more convenient adjustments.
- Three position vibration absorbing side handle for increased comfort.
Check StockWORKSITE Brushless Lithium Ion Cordless Compact Router 20V MAX Fixed Base Wood Router Tool Kit for Slotting Trimming Carving
- [Brushless Motor] With brushless motor, this Laminate milling engraving hand machine can deliver faster and more accurate cuts in a variety of....
- [6-Speed Mode] Electronic variable speed can be controlled by the variable speed dial from 10,000 to 30,000 RPM to match the speed to versatile....
- [Separate Lock Button] On/off button with separate lock button helps prevent accidental startup of the tool, which can ensure user and work piece....
- [Soft Start Design] Soft start function will make smoother start-ups and better accuracy..
- [Precise Operation] Depth adjustment knob allows for fast and easy height adjustments to reach precise cutting..
Check StockMakita XML02PT 36V (18V X2) LXT 17\ Lawn Mower Kit (5.0Ah)
- Makita-built motor delivers 3,600 RPM for faster and powerful cutting.
- Easy to operate lever for quick adjustment of 13 cutting heights (.8"- 3").
- Soft start suppresses start-up reaction for smooth start-ups and longer gear life.
- 17" cutting width for optimum performance.
Check StockSKIL 10 Amp Fixed Base Corded Router —RT1323-00
- 10 AMP FIXED BASE ROUTER TOOL—Powerful 10 Amp, 2.0 HP motor provides smooth and accurate routing from start to finish..
- SPEED CONTROL—Lets you adjust speed based on the material..
- SOFT START—Provides a safe and controlled start to routing..
- LIVE TOOL INDICATOR—Stay safe and alert with an indicator that lights up when the router is connected to power..
- DURABLE & ERGONOMIC—Die-cast motor housing and shaped handles provide superior grip and control..
Check StockMakita-UC3551A Chain Saw, Electric, 14 in. Bar
- "Tool-less" blade and chain adjustments for convenient operation and easy maintenance.
- Large trigger switch with soft start for smooth start-ups.
- Rubberized soft grip handle provides increased comfort on the job.
- Built-in current limiter helps protect motor from burnout by reducing power to motor when saw is overloaded.
- Large oil reservoir with view window allows operator to check bar oil level.
Check StockMakita PO5000C 5\ Dual Action Random Orbit Polisher
- Powerful 7.8 amp motor delivers more output and variable (180 - 790) RPM.
- 7/32" (5.5mm) orbit diameter provides a swirl-free finish.
- Conveniently located variable speed control dial (0 - 6, 800 OPM) enables the operator to match the speed to the application.
- Electronic controller provides constant speed control which automatically applies additional power to the motor to maintain speed under load.
- Electronic controller provides soft start which is designed to suppress start-up reaction for smooth start-ups and longer gear life.
Check Stock