Reviews Socket Welding Globe Valve

WP-17FV TIG Welding Torch 150Amps Flexible Head Neck With Gas Valve Control 4M Hose Cable

  • This WP-17FV Flexible TIG Welder Torch Allows to bend the torch head at any direction you need while welding..
  • It is with 5/8-18RH Gas Power Hose Connnector,10-25plug and 2 Pins female air socket.
  • Cable Hose with Cloth Cover, better heat dispersion performance.You will get 1 complete tig welding torch at this price..
  • It with gas valve control, better for control gas..
Check Stock

Texsport Double 2 Mantle Propane Lantern for Outdoor Use , Green

  • Heat resistant globe baked enamel hood metal socket injector valve adapter.
  • Large paddle foot plastic base for greater stability holds 16.4 oz. or 14.1 oz.
  • Disposable propane fuel cylinder (not included).
Check Stock

Siglent Technologies SDG1062X Series Dual-Channel Function/Arbitrary Waveform generators

  • 【Specifications】Voltage Supply: 9-12V DC Input.
  • Input Distortion: less than 1% (at 1KHz).
  • 【welding steps】The welding installation considerations, follow these steps: First,the components are welding the front board, from low to high principles, namely the first low welding components, such as, capacitor, resistor, diode, etc.Then welding IC socket, terminal blocks, finally power socket, adjustable potentiometer..
  • 【Debugging steps】After completion of welding on IC, XR2206, you need to pay attention to the direction of IC, or insert the might damage the chip! Check IC for errors, if any, please correct in time..
  • 【Power】 Insert the power supply, power supply for 5.5 x 2.1 port, inside and outside is negative polarity.
  • Fitting for 9-12 v power supply voltage, and the waveform may not be stable for more than 12V..
  • 【Please note】these are DIY kits, you need to follow the welding steps in our description and complete the final installation..
Check Stock

Reed Tool HWB Cast Ductile Hydrant Wrench

  • Shower Valve Socket Wrench Set: The Set comes with five double end wrenches, bar handle and a bar wire holder for easy storage. The hex-shaped bodies allow for use with an adjustable wrench. There is also a hole near each end of the wrench for turning with a long screwdriver..
  • Common Size: This shower valve socket set has 5 pieces of socket with bar handle. Each 125 mm socket has been designed with different sizes helping in quick and easy wrench selection. The socket sizes are 21/32”x 27/32”, 29/32”x 31/32”, 1-1/32” x1-3/32”, 1-5/32”x1-9/32”, 1-11/32”x 1-7/16". The diameter of handle is 9mm..
  • Durable Steel Construction: Made of long lasting durable solid steel and the surface is nickel-plated. 5pcs socket set and afterburner rod are connected with a stainless steel wire..
  • Easy To Use: First, Turn off water supply. Next, Remove faucet handle cap, screw and handle, exposes valve stem and its packing nut. And then, Place correct and of wrench over valve stem onto packing nut, insert handle into opposite side of wrench. At last, Turn clockwise to tighten nut..
  • Which You Need: These plumbing socket wrench set is perfect for removing and installing tub and shower valves, fittings and nuts..
Check Stock

Dante Products FP.GV.PTR Pewter Floor Plate for Dante Globe Valve

  • Each floor plate is precision die casted and CNC machined for use with our Dante Globe Valves.
  • 2-1/16 Inch Shaft Length with 2-1/8 Inch diameter surface.
  • The mating valve thread for Dante Products floor plates is 1/2" -14 NPSM.
Check Stock

LuckyHigh 2pcs Dual Welding Gas Gauges Oxygen (CGA-540) and Acetylene (CGA-510) Regulators Combo Solid Brass Gas Welder Regulator

  • Oxygen Regulator fits welding Oxygen Tanks with CGA-540 Valve.
  • Propane Regulator fits welding Propane tanks with CGA-510 valve..
  • Oxygen Outlet Pressure: 0-200 PSI,Acetylene Outlet Pressure: 0-30 PSI.
  • Oxygen Inlet: 0-4000 PSI,Acetylene Inlet: 0-400 PSI.
  • Welding Gas Gauges are made of solid brass..
Check Stock

Dante FP.GV.FB Flat Black Floor Plate for Dante Globe Valve - 1/2\ Threaded Mating Valve

  • Each floor plate is precision die casted and CNC machined for use with our Dante Globe Valves.
  • 2-1/16 Inch Shaft Length with 2-1/8 Inch diameter surface.
  • The mating valve thread for Dante Products floor plates is 1/2" -14 NPSM.
Check Stock

Heavy Duty Cutting Torch, Oxygen/Acetylene Cutting Welding Torch Stainless Steel Gas Welding Burning Torch for Industrial Workshops, Metal Cutting and Welding

  • Heavy Duty Cutting Torch, Oxygen/Acetylene Cutting Welding Torch Stainless Steel Gas Welding Burning Torch for Industrial Workshops, Metal Cutting and Welding.
  • Great for Different Gas: suitable for Oxygen-acetylene, propane, butane, natural gas and liquefied petroleum gas. Before the torch is ignited, the air-tightness of the air valves at the connection should be checked. the newly used cutting torch, the shooting and suction capacity should also be checked..
  • Cutting and Welding: Cutting range: 3-150mm / 0.12-5.90 inches, welding range: 9mm / 0.35 inches. Thread 7/8-20 at the nozzle, thread 9/16-18 at the gas port. Please see photo for more details..
  • No Gas Leakage: Conical step leakage proof interface is stable and firm, possesses good sealing, no falling off, no air leakage, durable and safe to use. When the cutting torch is ignited, the acetylene valve should be opened first, and then the oxygen valve should be opened, and the mouth should not point to people or animals..
  • Multi-purpose: Widely used in workshops, metal cutting and welding, mechanical maintenance, and more. If you have any questions or concerns, please be sure to send us a message, thank you!.
Check Stock

Tool Daily Pressure Washer Foot Valve for Sewer Jetter Kit, as Power Washer Ball Valve, 4000 PSI

  • Package include: 1-piece Foot Valve for sewer jetter kit, 1-piece coupler (3/8’’ quick connect socket+ M22 14mm male), 1-piece coupler (3/8’’ quick coupler plug + 3/8’’ male thread), 1-piece adapter (3/8’’ quick coupler socket + 3/8’’ male thread), 1-piece adapter (3/8’’ quick connect socket + 3/8’’ female thread)..
  • Operators of sewer jetting need both hands free to feed or retract the sewer jetter hose in the sewer line. Foot operated valve for sewer jet allows hands-free control..
  • Foot Valve for Pressure Washer Sewer Jetter Inlet: 3/8” female NPT. Foot Valve Sewer Jet Kit for Pressure Washer Outlet: 1/4’’ female NPT. Max Flow: Up to 8 GPM. Max Temperature: 320 °F. Maximum Pressure: 4000 PSI..
  • Steel Cover for safety, Heavy gauge steel construction for durability & stability. Pedal and valve ball are in protective housing..
  • Foot Valve for Sewer Jetting is excellent accessory for sewer hose operation. Inlet & outlet positioned to help keep hose out of the way. Sewer jetter kit for pressure washer also can be used in other applications..
Check Stock

25 G50 Blue Globe Light Bulbs Replacement Incandescent Transparent Glass Patio Lights 7-Watt C-9 E17

  • 1 Box of 25 of brand new transparent Blue G50 Globe Light Bulbs Replace your old bulbs today.
  • Perfect for the 4th of July or any and all holidays! Indoor/Outdoor Blue Bulbs. G50 Globe Lights with C-9 (E17) brass base sockets. Steady Bulbs stay on continuously while plugged in. No flashing on and off. Screw-In Replaceable. 25 Light Bulbs per order.
  • C-9 E17 Medium Brass Base Screw-In Sockets. Screw-in to any patio light string cord socket fitting for C-9 E17 light bulbs. Replace your old christmas light bulbs with a set of blue for the 4th of July this summer!.
  • 7 Watt 120 Volt Rated over 5,000 Hours lifetime - Extra Long lasting - Weatherproof Water-Resistant base sockets. Outdoor Glass Light Bulbs..
  • Transparent colors - Translucent colored Blue Bulbs that last for years. 100% clear blown glass with screw-in brass socket. Globe Shaped - Large Circular Bulbs cover space for area mood lighting.
Check Stock

Witonics Capacitor Replacement Kit for Hyundai X93W with Soldering Tools

  • Professional contractor grade oxyacetylene welding and brazing outfit.
  • Two Welding/Brazing Tips for brazing up to 1-Inch copper tubing and welding up to 1/8-Inch steel.
  • Single stage Patriot series regulators with protective rubber gauge boots.
  • Front valve welding handle with stainless steel ball point valves for accurate gas control.
  • Welding Goggles with flip up lenses and are designed to accommodate prescription eyewear.
Check Stock

3M Rugged Comfort Half Facepiece Reusable Respirator 6502/49489, Medium

  • Resilient silicone faceseal helps provide comfort, durability, and stability with a soft but firm seal.
  • Proprietary Cool Flow valve helps reduce heat and moisture.
  • Exhalation valve cover helps direct exhaled breath and moisture downward to reduce fogging of eyewear and grinding and welding shields.
  • Low profile half facepiece design offers a wider field of view and better compatibility with welding and grinding shields.
  • Adjustable head harness assembly offers improved fit and comfort.
Check Stock

Uniweld KC100P Centurion Weld Braze Outfit with 511 Plastic Carrying Stand brass copper blue

  • Professional contractor grade portable oxyacetylene welding and brazing outfit-Tanks not included (Sold Separately).
  • Two Welding/Brazing Tips for brazing up to 1-Inch copper tubing and welding up to 1/8-Inch steel.
  • Single stage Centurion series regulators with protective rubber gauge boots.
  • Front valve welding handle with stainless steel ball point valves for accurate gas control.
  • Welding Goggles with flip up lenses and are designed to accommodate prescription eyewear.
Check Stock