Reviews Socket Rail Organizers

Precision Defined Aluminum Tool Socket Holder 3-Piece Set | Red, Heavy Duty 1/4-Inch x 16 Clips, 3/8-Inch x 16 Clips, 1/2-Inch x 14 Clips | 360 Rotation

  • ...ganize and protect your sockets from a jumbled mess and getting lost from job to job. Your sockets will stay in place when opening and closing drawers, cabinets and tool chests. Versatile in a fitting your exact work area, simply hang them on a pegboard or simply place them upright in your garage, these tool socket organizers is the go-to essential holder.
  • ✅ FULLY CUSTOMIZABLE: Each rail is built for versatility. Easily swap different size sockets in and out of each rail and customize to your socket set. Each rail includes hanging holes on either end so you can hang them vertically or horizontally to fit your workspace. Or simply place them standing upright in your Craftsman tool chest or tool drawer. Fits Metric or SAE sockets.
  • ✅ AVOID CLUTTER: No one likes searching for tool sockets in a messy workspace. You will easily lose them in your full array of tools. Simply use Precision Defined’s aluminum tool socket trays to clean your man cave!.
  • ✅ IRONCLAD: Built with toughness from the ground up. Each rail is made from enforced aluminum and spray-coated to prevent rust. The socket rail storage is built for a long lasting life while keeping your sockets organized. With spring loaded ball bearing socket clips, pop and snap your sockets in and out wit....
Check Stock

ARES 70345-3-Piece 1/2-Inch Drive Aluminum Socket Organizer Set - Store up to 10 Sockets on Each Rail and Keep Your Tool Box Organized

  • ITEM SPECIFICATIONS: These light, portable metal socket organizers are 9.84 inches long, made of machined aluminum and come in 3/8-inch and 1/2-inch drive. Each rail holds 10 metric or SAE sockets, and the socket clips have spring-loaded ball bearings to firmly hold sockets in place, even upside down. **Sockets are not included**.
  • VERSATILITY: Every ARES socket rail is fully customizable, with removable end caps to allow for easier clip changes, in addition to being wall-mount ready. Whether you plan on using an ARES socket organizer to assemble a socket set that will travel with you effortlessly or just want a way to keep your garage more organized, these socket organizers have you covered..
  • INTERCHANGEABLE: Our patented ball bearing socket clips glide over any of the aluminum rails, allowing you to mix and match your sets as you please. If you want to put a few 1/4-inch sockets on your 1/2-inch socket organizer, you can..
  • RELIABLE | EFFECTIVE | EFFICIENT: Users trust ARES to be quality tools. You are backed by our Performance Assurance Limited Lifetime Warranty. If you have any issues with your ARES Socket Organizer, simply contact customer service for troubleshooting help, parts, replacement, or refund..
  • ASPCA BUSINESS AMBASSADOR: We are proud to be p....
Check Stock

MichaelPro MP014001 3-Piece Aluminum Socket Organizer Rail Set- 1/4-inch, 3/8-Inch, and 1/2-Inch Drive Tool Socket Organizers Hold 46 Sockets, Heavy Duty Socket Storage

  • 【Item Specifications】 MichaelPro’s 3pc Socket Organizer Set- 1/2, 3/8, and 1/4 inch drive socket holders are 15 inches long, lightweight and portable. Easily organize all your sockets on this easy to use socket rail..
  • 【High Capacity】 These socket rails can hold up to 46 sockets, these organizers for sockets are equipped with 16 1/4" clips, 16 3/8" clips, and 14 1/2" clips that secure your sockets under heavy conditions. So versatile that they should go into your toolbox as part of your toolbox accessories!.
  • 【Avoid Cluttering】No one likes searching for sockets in a messy workspace. These tool box socket holders organize and protect your sockets from a jumbled mess and getting lost from job to job..
  • 【Heavy Duty】 Made in Taiwan and engineered with high grade aluminum, these MichaelPro socket organizers are built to last..
  • 【Reliable & Effective】Our customers trust our tools to be of quality ones. Your socket organizers are backed by our Limited Lifetime Warranty. If you experience any issues, simply contact us for assistance..
Check Stock

ARES 70122-3/8-Inch Drive Blue 9.84-Inch Aluminum Socket Organizer - Store up to 10 Sockets and Keep Your Tool Box Organized - Sockets Will Not Fall Off this Rail

  • ITEM SPECIFICATIONS: These light, portable metal socket organizers are 9.84 inches long, made of machined aluminum and come in 3/8-inch and 1/2-inch drive. Each rail holds 10 metric or SAE sockets, and the socket clips have spring-loaded ball bearings to firmly hold sockets in place, even upside down. **Sockets are not included**.
  • VERSATILITY: Every ARES socket rail is fully customizable, with removable end caps to allow for easier clip changes, in addition to being wall-mount ready. Whether you plan on using an ARES socket organizer to assemble a socket set that will travel with you effortlessly or just want a way to keep your garage more organized, these socket organizers have you covered..
  • INTERCHANGEABLE: Our patented ball bearing socket clips glide over any of the aluminum rails, allowing you to mix and match your sets as you please. If you want to put a few 1/4-inch sockets on your 1/2-inch socket organizer, you can..
  • RELIABLE | EFFECTIVE | EFFICIENT: Users trust ARES to be quality tools. You are backed by our Performance Assurance Limited Lifetime Warranty. If you have any issues with your ARES Socket Organizer, simply contact customer service for troubleshooting help, parts, replacement, or refund..
  • ASPCA BUSINESS AMBASSADOR: We are proud to be p....
Check Stock

NEIKO 02454A Aluminum Socket Holder and Organizer Set with Lightweight and Heavy-Duty Rails 1/4-Inch 3/8-Inch and 1/2-Inch Drives 3-Piece Set

  • SOCKET ORGANIZER & HOLDER: Our Aluminum Socket Holder and Organizer Set is the perfect way to store all your sockets. Each holder easily organizes....
  • STURDY & SECURE HOLD: Each socket clip has a built-in spring-loaded ball detent for the most secure hold on each socket. The aluminum construction....
  • CUSTOM SOCKET-ORGANIZER TRAY: Our socket organizers feature rubber ends that easily slip on or off based on your needs. The included socket clips are....
  • HANGING TOOL ORGANIZER: Open hole slots on both ends allow you to hang this rail set onto wall tool boards or pegboards for easy access and....
  • INCLUDED CLIPS: Our socket rail organizer set includes 3 total pieces with 54 socket clips. It holds twenty 1/4-inch drives, eighteen 3/8-inch drives,....
Check Stock

Precision Defined Portable Tool Socket Organizer Tray, 80 Sockets, 1/4-Inch x 20 Clips, 3/8-Inch x 30 Clips, 1/2-Inch x 30 Clips (Black)

  • ... socket holders organize and protect your sockets from being a jumbled mess and getting lost in your garage. Your sockets will stay in place when opening and closing drawers, cabinets and tool chests. Versatile in a fitting to your work area, simply place them in your garage, tool chest or drawer, these tool socket organizers is the go-to essential holder for al.
  • ✅ PORTABLE: Each heavy duty tool socket tray organizer has 80-piece sockets to fit all your SAE or Metric sockets in one place. Featuring 20 x ¼-inch clips, 30 x ⅜-inch clips and 20 x ½-inch clips, the tray is travel ready to take with you job-to-job. With spring loaded ball bearing socket clips, pop and snap your sockets in and out with ease..
  • ✅ ORGANIZE AND DE-CLUTTER: No one likes searching for tool sockets in a messy workspace. You will lose them in your full array of tools. Simply use Precision Defined’s tool socket trays to clean your man cave! Each socket holder is customizable so you can fit the tray to your liking. Simply swap each size on a different rail on the tray..
  • ✅ IRONCLAD: Built with toughness from the ground up. Each holder is made fr....
Check Stock

OEMTOOLS 22389 Pro Magnetic Socket Tray, Customizable Ratchet Organizer, Adjustable Drive Studs, Portable Socket Set Organizer, 3 Row Socket Organizer

  • ORGANIZE YOUR WAY: Ideal socket organizers for toolboxes drawer organization.
  • Adjustable studs fit either side of the socket holder tray.
  • Set how you like, or rearrange the socket tray set if you change your mind.
  • PRACTICAL DESIGN: Magnetic socket storage makes sense.
  • Rubber magnets line the socket holder and allow sockets to adhere securely.
  • Remove the back panel to attach almost anywhere.
  • Perfect socket holders organizers for tool box or on the go.
  • TAKE IT OR LEAVE IT: This socket organizer set is designed for mobility.
  • Metal swivel handle makes it easy to transport alongside your other equipment.
  • A socket storage organizer for repairs on the go, and a socket organizer tray for toolbox storage.
  • IF IT FITS, IT STICKS: Magnetic socket trays for tool boxes.
  • Magnetic socket organizer set can hold a wrench or ratchet to the magnetic board of the OEMTOOLS socket organizer.
  • Move the socket organizers for toolboxes to your travel set and back again.
  • PRODUCT SPECIFICATIONS: Green socket organizer for tool box drawer measures 6” x 12” x 1.2”.
Check Stock

ARES 60058 - 6-Pack Set Metric and SAE Magnetic Socket Organizers -Blue and Red -1/4 in, 3/8 in, 1/2 in Socket Holders -143 Pieces of Standard (Shallow) and Deep Sockets -Organize Your Tool Box

  • METRIC SOCKET ORGANIZERS: This set includes three blue metric magnetic socket organizers in 1/4-in drive, 3/8-in drive, and 1/2-in drive that allow you to store shallow and deep metric sockets. These organizers can be used with the following socket sizes: 4mm, 4.5mm, 5mm, 5.5mm, 6mm, 7mm, 8mm, 9mm, 10mm, 11mm, 12mm, 13mm, 14mm, 15mm, 16mm, 17mm, 18mm, 19mm, 20mm, 21mm, 22mm, 23mm, 24mm, 25mm, 26mm, 27mm..
  • SAE SOCKET ORGANIZERS: This set also includes three red SAE magnetic socket organizers in 1/4-in drive, 3/8-in drive, and 1/2-in drive that allow you to store shallow and deep SAE sockets. These organizers can be used with the following socket sizes: 1/8-in, 5/32-in, 3/16-in, 7/32-in, 1/4-in, 9/32-in, 5/16-in, 11/32-in, 3/8-in, 7/16-in, 1/2-in, 9/16-in, 5/8-in, 11/16-in, 3/4-in, 13/16-in, 7/8-in, 15/16-in, 1-in, 1 1/16-in, 1 1/8-in, 1 3/16-in, 1 1/4-in. *Sockets not included with the holders.*.
  • DESIGN CONSIDERATIONS: Each magnetic socket holder is designed to securely store both deep and shallow SAE sockets, while a soft, rubberized covering over the bottom of the tray prevents damage to finished surfaces. These portable socket holders are made from heavy duty, high impact plastic and feature powerful magnets to hold your sockets in place, so you can ....
Check Stock

ARES 60057-6-Pack Set Metric and SAE Magnetic Socket Organizers -Black and Red -1/4 in, 3/8 in, 1/2 in Socket Holders -143 Pieces of Standard (Shallow) and Deep Sockets -Organize Your Tool Box

  • METRIC SOCKET ORGANIZERS: This set includes three black metric magnetic socket organizers in 1/4-in drive, 3/8-in drive, and 1/2-in drive that allow you to store shallow and deep metric sockets. These organizers can be used with the following socket sizes: 4mm, 4.5mm, 5mm, 5.5mm, 6mm, 7mm, 8mm, 9mm, 10mm, 11mm, 12mm, 13mm, 14mm, 15mm, 16mm, 17mm, 18mm, 19mm, 20mm, 21mm, 22mm, 23mm, 24mm, 25mm, 26mm, 27mm..
  • SAE SOCKET ORGANIZERS: This set also includes three red SAE magnetic socket organizers in 1/4-in drive, 3/8-in drive, and 1/2-in drive that allow you to store shallow and deep SAE sockets. These organizers can be used with the following socket sizes: 1/8-in, 5/32-in, 3/16-in, 7/32-in, 1/4-in, 9/32-in, 5/16-in, 11/32-in, 3/8-in, 7/16-in, 1/2-in, 9/16-in, 5/8-in, 11/16-in, 3/4-in, 13/16-in, 7/8-in, 15/16-in, 1-in, 1 1/16-in, 1 1/8-in, 1 3/16-in, 1 1/4-in. *Sockets not included with the holders.*.
  • DESIGN CONSIDERATIONS: Each magnetic socket holder is designed to securely store both deep and shallow SAE sockets, while a soft, rubberized covering over the bottom of the tray prevents damage to finished surfaces. These portable socket holders are made from heavy duty, high impact plastic and feature powerful magnets to hold your sockets in place, so you can....
Check Stock

WORKPRO Magnetic Socket Organizer Set, 6-Piece Socket Holder Set Includes 1/4", 3/8", 1/2" Drive Metric SAE Socket Trays, Holds 141 Pieces Standard Size and Deep Size Sockets(Socket not Included)

  • Large Capacity Magnetic Socket Organizer Set: These magnetic socket organizers can store up to 141 metric and SAE sockets and two drive adapters. The kit includes three blue metric magnetic socket organizers and three red SAE magnetic socket organizers for 1/4", 3/8", and 1/2" drives. Used to collect SAE and metric receptacles, but not for impact sockets. Tip: sockets are not included with the holders..
  • Magnetic Base: The magnetic base secures the sockets in their designated places. They won't fall out even if you turn the socket tray upside down. They also allow you to attach the tray to any steel surface..
  • No scratches Installation: The surface of the magnetic base is composed of soft rubber, so there is no need to worry about scratching the surface of your metal tools and sockets, perfect fit for your toolset..
  • Keep Your Sockets Organized: Find the right socket quickly and easily with this magnetic socket holder set. Each tray has a legible label, so you can tell which slot to grab. Instead of finding the socket you want in a disorganized toolbox like before..
Check Stock

OEMTOOLS 22486 3 Piece Metric Magnetic Socket Tray Set Magnetic Socket Organizer Holds Up to 75 Sockets in 1/4 3/8 and 1/2 Sizes Blue Magnetic Socket Holders

  • OPTIMAL SOCKET ORGANIZATION: Take your socket organization to the next level.
  • These socket organizers hold up to 75 sockets.
  • BUILT FOR EFFICIENCY: Our socket organizer trays’ powerful magnetic bases keep your socket set at the ready on metallic lifts, creepers, or rolling....
  • QUICK IDENTIFICATION: Sifting through the drawer for the right socket wastes time.
  • With our socket set organizer, your search is over.
  • SLOTS FOR ALL YOUR NEEDS: We’ve built this socket holders organizers with your efficiency and organization in mind.
  • SURFACE SAFE: Features a non-marring rubberized base that can be placed against any metallic surface without damaging them.
Check Stock

Precision Defined Aluminum Tool Socket Holder Replacement Clips, 3/8-Inch, 10-Pack, Spring Loaded Ball Bearing | Metric or SAE Sockets

  • ✅ EXTRA CLIP (10-Pack) – For owners already with the PD tool socket organization rails, get the extra 10-pack to add to your rail or as a replacement if a few sockets suddenly go missing. Get the essential organization tool for any mechanic, tradesman and DIY specialist. These tool box socket holders organize and protect your sockets from a jumbled mess and getting lost from job to job..
  • ✅ SPRING LOADED: Each socket clip is firm and secure. Easily swap different size sockets in and out of each rail and customize to your socket set. Fits Metric or SAE sockets.
  • ✅ 360 ROTATION: PD Tool Socket Holder Rail clips rotate 360 degrees to allow you to easily turn and spin your sockets to read the size. For those that are OCD about our sockets, get the perfect rail for you so all sockets are neatly organized and stored with the size in one spot..
  • ✅ AVOID CLUTTER: No one likes searching for tool sockets in a messy workspace. You will easily lose them in your full array of tools. Simply use Precision Defined’s aluminum tool socket trays to clean your man cave!.
  • ✅ FITS PD SOCKET HOLDERS: Fits only Precision Defined tool socket holders. **Sockets ONLY, Rails sold separately..
Check Stock

OEMTOOLS 22383 4 Piece Black Aluminum Socket Tray Set, Trays for 1/4”, 3/8”, and 1/2” Drive Size Sockets, SAE Socket Tray, Socket Organizers for Toolboxes

  • MODULAR DESIGN: Organize your sockets however you want in trays and rearrange whenever needed.
  • Quickly identify the right tool every time with this tool socket organizer.
  • Additional 1/2 inch socket organizer tray to accommodate any socket collection.
  • FORM WITH FUNCTION: Rubber feet protect your workspace from scratches.
  • Non-magnetic OEMTOOLS socket tray designed to prevent metal dust buildup.
  • Anodized black finish creates a sleek toolbox appearance.
  • NEVER MISS A BEAT: Adjustable socket organization studs slide easily from either direction.
  • The socket tray SAE system guarantees your sockets stay secure while allowing for one-handed removal.
  • Our socket set organizer is designed to meet your needs.
  • INTUITIVELY CRAFTED: The billet aluminum sockets organizer construction is lightweight and long lasting.
  • Subtle socket set tray organizer design means they fit easily in any storage drawer.
  • TRAY DETAILS: 1/4” socket organizer tray set measures 9” x 3”.
  • (2) 1/2” socket holders organizers for tool box measure 12” x 3”.
  • The socket organizer for tool box drawer has adjustable studs.
Check Stock