Reviews Snap on Brake Cap

Allstar Performance ALL50855 Bleeder Screw Cap, (Set of 10)

  • Snap-on cap helps protect the brake bleeder screw from dirt and corrosion.
  • New caps insure water will not cause rust and seize.
  • Conveniently packaged in a box of 2 to assist with all project sizes.
  • Also suitable for a broad variety of industrial and commercial uses.
Check Stock

ATPEAM Pneumatic Vacuum Brake and Clutch Fluid Bleeder Tool Kit | Car Truck Motorcycle Brake Oil Change Set with Extractor and Refill Bottle, 4 Master Cylinder Adapters, 2 Air Quick Plugs

  • Pneumatic Brake Oil Bleeding Tool: This brake bleeder kit is used for changing brake and clutch oil, as well as suck out old oil and air from replaced brake system on motorcycle car truck and pickup. Connect the extractor to the air compressor and brake caliper, turn on high power air compressor to 90-120PSI, negative pressure is generated in the braking system to suck out the waste fluid and air, and guide the new oil to fill the whole brake system..
  • One Man Operation: Refill bottle can be held on the brake fluid reservoir. On the 1L waste oil extractor bottle, there is a the hanger which can hook on the engine hood and keep the bottle above the vehicle bleeder valve, as well as the trigger locker is also helpful for hand-free when suck. Also, you do not need to tread the brake pedal again and again when use this brake and clutch bleed tool..
  • Automatic Brake Refill Device: There is a long screw fittings on 0.8L refill bottle cap, which can work with the master cylinder adapter to snap on the mouth of the vehicle's brake fluid reservoir, without hand support. Fully open the valve on the long screw, the fluid will flow out, and stop once the brake fluid level in the reservoir has been sufficient to cover the threaded port, no need to keep an eye on it. ....
Check Stock

Powerbuilt 648633 Internal Snap Ring Pliers , Red

  • For spreading snap or lock rings retaining parking brake adjuster cams to brake shoes, attaching pedals to shafts, inside transmissions.
  • Knurled outer jaw surface for positive grip on ring.
  • For spreading snap or lock rings retaining parking brake adjuster cams to brake shoes.
  • Also attaches pedals to shafts, inside transmissions, etc.
Check Stock

Dorman Help! 13962 Brake Bleeder Caps

  • Universal Fitment: Please check the SIZE before Purchase(you can find the size on the picture).. Fits most of 7mm-8mm bleed screw applications on cars and motorcycles. Please check the size of bleed screw when you buy our brake bleed dust cap. Thanks..
  • Length: 32.7mm / 1.28inch Size: 32.7*7*10mm.
  • Mutiple Function: Brake bleeder screw caps can protect the Bleed Screws, and make the Dirt and Dust out of Bleed Screws..
  • Material: Brake Bleed rubber Caps is made of high quality rubber..
  • Premium Quality: 100% brand new rubber brake bleed cap and easy Installation.
Check Stock

UTSAUTO Brake Bleeder Screw Caps Grease Dust Cover Brake Bleed Nipple Cap for Cars and Motorcycle 30 Packs

  • Universal Fitment: Fits most of 6mm-8mm bleed screw applications on cars and motorcycles. Please check the size of bleed screw when you buy our brake bleed dust cap..
  • Mutiple Function: It can protect the Bleed Screws, and make the Dirt and Dust out of Bleed Screws..
  • Material: Brake Bleed rubber Caps is made of high quality rubber..
  • Premium Quality: 100% brand new rubber brake bleed cap and easy Installation.
  • Package inlcude 30pcs Brake Bleeder Screw Caps.
Check Stock

RealiNice V Brake Noodle Cable Guide Pipe with Boot Set (2 Pairs)

  • 【PERFECT FIT】Fully compatible with Shimano and Avid V Brake system..
  • 【DURABLE MATERIAL】stainless steel noodle, rubber boot, alloy cable end cap.
  • 【IMPROVED PARTS】Plastic catheter with lube, reduce brake cable friction, enhance braking performance..
  • 【FULL PROTECTION】Cable end cap prevent the splitting of the end of the cable core..
  • 【2 PAIRS SET】Including brake noodle x4, rubber boot x4, cable end cap x4.
Check Stock

Brake Reservoir, Type 2 Style Fits Bus 58-66 & Buggy Master, Compatible with Dune Buggy

  • Front Brake Fluid Master Cylinder Reservoir Cap in brite-dipped anodized finish.
  • This round threaded front brake cap (Pro-tek Part No. RC-100) is 2.25" x .50" and has the word Pro-tek engraved on it twice.
  • 100% CNC made from 6061 T6 billet aluminum available in 4 colors - red, blue, gold, silver.
Check Stock

ACDelco Professional 18M1878 Brake Master Cylinder Assembly

  • Meets the brake performance requirements of SAE J1153 and J1154 testing, providing reliability and quality.
  • Pressure tested to ensure safe and confident braking. Style: With Rectangular Reservoir Cap.
  • no extra stress on the brake boosting mounting.
  • Geometrical tolerance ensures that the body and plastic reservoir match for a proper fit.
  • Piston assembly and return spring help to prevent brake drag, which can cause premature brake pad wear.
  • Pressure tested to ensure safe and confident braking.
  • Cast iron and aluminum specifications provide no extra stress on the brake boosting mounting.
Check Stock

Swpeet 14Pcs Bike Brakes Sets, Including 2 Pairs V-Type Brakes, Universal Bike Front and Rear Brake Cable, Cable End Caps, Rubber Boot, V Brake Noodle Bend Pipe for Most Mountain Bike

  • 【 What You Get】 ------ In this kit, You will get 14Pcs Complete Bike Brake Set, Including 1Pcs V Brake Noodle 90 Degree Bend Pipe.
  • 1Pcs V Brake Noodle 110 Degree Bend Pipe.
  • 1Pcs Rear Brake Cable. Intotal 14Pcs can meet all your bicycle installation needs..
  • 【 2 Pairs Mountain V Bike Brakes】 -------- Which can fit most of bicycles mountain bikes, Durable aluminium alloy and plastic and rubber for the bike brake set, they are very strong and with resistance to cold, heat and oxidation. and it is not easy to out of the shape. A fairly decent replacement brake system. Parts are well made and work well. The adjustment screw for the brake springback makes it easy to adjust..
  • 【 4Pcs Cable End Caps】 -------- The end caps included can help prevent the cable ends from splitting and avoid you being poked by the split ends.
  • Put the cap through the cable and clamp the cap to fix it firmly to the cable.
  • 【 High Quality】 -------- The brake housing set is made of alloy and plastic, strong and durable enough for long time use, with resistance to cold, heat and oxidation, not easy to deform, ensuring the brake sensitive, suita....
Check Stock

Bike Brake Cable Housing Kit Includes 1 Set Bicycle Brake Line 2 Pieces V Bike Brake Noodle Cable Guide Pipe and 2 Pieces Plastic Hoses for Road Mountain Bicycle Cycling Black Brake Line

  • What you receive: comes with 1 piece bicycle brake line set (includes 1 piece 5 mm brake line 2.5 m, 1 piece general front brake internal line 1.1 m, 1 x general rear brake internal line 1.7 m, 6 x brake line cap, 2 pieces thread tube S buckles, 2 pieces inside tail cap, 1 piece inside O ring, 5 pieces C-clip ) and 2 pieces V bicycle brake noodles cable set (includes 2 pieces V bike brake noodle cable guide pipe and 2 pieces plastic hoses).
  • Bicycle brake line set: strong cable for more braking power and smooth operation, long length and various head to fit mountain bike, road bike.
  • V Bicycle brake noodles cable set: included 2 pieces aluminium alloy V bike brake noodle cable guide pipe and 2 plastic hoses hose, made of rubber tube with a plastic pipe, reduce friction brake line, effectively protect the brake line, reduce brake line resistance, they are suitable for V bicycle brake repairing.
  • Durable and sturdy: this bicycle riding set is made of quality material, each replacement part has been well made, reliable and durable, can be applied for a long time.
  • Wide application: this bicycle brake cable housing kit is suitable for both mountain bikes and road bikes, contains everything you need to replace your existing ....
Check Stock

JSP Manufacturing UFP Plastic Outer Member Cap 2-1/2 inch Diameter 32547 fits A60 A70 A84 A75 (1)

  • Brand New UFP Plastic Outer Member Cap ~ 1 Pack.
  • Replaces UFP Part #: 32547 ~ Replacement black plastic outer member housing cap.
  • Covers the access hole to the actuators master cylinder reservoir plug ~ Twist-Lock design, locks into place with a simple clockwise turn.
  • Standard issue cap works with UFP Brake Actuators ~ Compatible with Trailer Buddy UFP Brake Actuators.
  • Fits: A-60, A-70, A-75, A-84 series UFP Brake Acuators ~ Made in USA!.
Check Stock

Riakrum 2 Sets Bike Brakes Include 2 Pairs V-type Brakes with 2 Pieces Braking Cables and 4 Pieces Cable End Caps for Mountain Bikes

  • Complete bike braking kit: you will get 2 pairs of V type brakes, 2 pieces of braking cables and 4 pieces of cable end caps in total.
  • This is a complete set of mountain bike brake equipment.
  • Size information: the brake arm is 110 mm/ 4.3 inches.
  • The front and rear brake cables are 27.5 inches and 68.9 inches respectively.
  • They are suitable for most V-type brakes bike.
  • Quality materials: the brake arm is made of aluminum alloy, which is solid and not easy to break.
  • The brake pad is made of hard-wearing rubber, which is heat resistant and not easy to deform, providing great braking power on bike rim in both dry and wet conditions.
  • The brake cable is also made of quality aluminum alloy and covered with black PU leather pipe, which makes the cable more strong and durable.
  • Cable end caps: the end caps included can help prevent the cable ends from splitting and avoid you being poked by the split ends.
  • Put the cap through the cable and clamp the cap to fix it firmly to the cable.
  • Stop smoothly with less noise: the grooves of the brake pads can effectively prevent sand or stone damage the wheel rims.
  • The slightly curved design can provide better braking power and reduce stopping distance....
Check Stock

4 Pieces Brake Cable Universal Bike Inner Brake Cable Housing Kit Bicycle Brake Cable Replacement for Mountain and Road Bike Gear Kit (Black)

  • Brake cable set: come with a set of brake cable kit, you get 4 pieces inner brake cables, that enough replace for your old one in long life.
  • These set are compatible to mountain bike and road bike universal.
  • Brake cable size: the cable housing is 2.5 m in length and 5 mm in thickness, the front brake cable is 1.1 m in length, the rear brake cable is 1.7 m in length, coming with cable collar, cable end and O-ring.
  • The brake cable housing kit is wear-resistant and durable, help provide safety to the cyclist.
  • Quality material: the brake housing is made with strong PVC coat coming with stainless steel cable, which improves the smoothness of the brake housing, so it is smooth and resistant.
  • It can sustain high cable tension forces without splitting, helping to stop your bike instantly.
  • The shell is made of PVC material, with resistance to cold, heat and oxidation, not easy to deform, ensure the brake sensitive, suitable for most kinds of weather conditions of riding.
  • Applicable scope: bike housing and brake cables can be applied to mountain bike, road bike, small wheel bike, foldable bike, good for maintenance and upgrading of cables.
  • Note: please cutting off no need ended and wear tail-end cap, prevent to hurt yourself.
  • You will get: the housing replacement ....
Check Stock