Reviews Snap in Valve

Tire Supply TR-572 Brass Commercial 3-3/4 Valve Stem (10)

  • Snap-In Tubeless Valve Stem – Created as a Schrader replacement these black tire valve stems can be installed into any standard wheel seamlessly using and let you add a replacement tire valve core effortlessly with a core remover tool..
  • Leak-Resistant, Road-Ready Design – The heavy-duty rubber is weather resistant, strong enough to stand up to on- and off-road adventures and won’t leak air or retain moisture even during intense climate or environmental changes..
  • Rust-Resistant Brass Tip – Each TR-413 tire valve stem is fitted with a high-quality brass fitting that allows you to safely secure a tire valve stem cap. It also allows for better air flow when you’re filling up tires or checking tire pressure..
  • Optimal Stem Valve Length – Valve-Loc valve stems for tires are 1.25” in length and fit wheel hole diameters of 0.453” to ensure they can fit a wide range of common cars, trucks, SUVs, RVs, outdoor recreational vehicles and other standard-sized wheels..
  • Complete Black 4-Pack – Every order comes with four individual snap-in, tubeless tire valve stems to make it easier to swap out one at a time as needed, or to replace all stems on your vehicle at once. They’re also backed by our unbeatable service!.
Check Stock

TR415 Rubber Snap-in Tire Valve Stem for 0.625 inch Rim Holes on Standard Vehicle Tires (50pcs/Box)

  • TR415 valve stems for tubeless 0.625” (11.5mm) diameter rim holes, these tire valves are 1.25" long (effetive length) and snap in easily to your tires., package contains the 50 pcs rubber snap-in valve stems..
  • TPMS TR415 Rubber Snap-in Valve Stem (50 pcs/ box).
  • Widely fit for car and motorcycle and electric vehicle tubeless tire etc.
  • Constructed of brass and ozone resistant EPDM rubber, better performance, durable, practical, long service life.
  • Meets SAE requirements, remains flexible in extreme cold weather.
Check Stock

100 Pieces Tire Valve Stems Assortment Rubber Black Rubber Snap-in Valve Stems Standard Length Replacement Tire Valve Stems for Car Tubeless Rim Holes Replacement (TR413 TR412 TR414)

  • What you will get: you will receive a total of 100 pieces of tubeless tire valve stems, sufficient quantity to meet your demands for daily use and replacement, you can store them for a long term use and please check the compatibility information carefully before placing an order.
  • Quality material: these black rubber snap-in valve stems are made of quality brass and ozone-resistant rubber, and have been tested by EPDM, ozone and leakage tests, and are equipped with high temperature brass valve cores, better performance, can serve you for a long time, economical and practical.
  • Easy to install: the standard length replacement tire valve stems are very easy to install and disassemble due to the snap-in design, you can easily install the valve stem with hands, time-saving and simple, providing you with much convenience when you are driving out.
  • When replacing a tire, a tire technician should always replace the valve stem to ensure there are no issues with the tire changing process.
  • Practical function: the tire valve stem can keep your car tire well inflated at a steady air pressure level, thus to reduce the tire wear and keep the vehicle running smoothly, also the quality part you choose to replace, you can buy it with confidence.
Check Stock

OTAUPRS 4 Pcs PVR32 Bolt-in Tubeless Tire Valve Stems Fit 0.453 Inch Rim Holes 90 Degree

  • 【HIGH QUALITY】:The Tire Valve stem are constructed of high temperature brass valve cores and ozone resistant EPDM rubber,100% Ozone tested and leak tested, improve the safety of your vehicle..
  • 【FITMENT】:The Brass Snap-in valve stem is standard diameter and is suitable for any passenger car, Light Trucks, Small Trailers, wheelbarrows, Lawn mowers, ATVs, and Motorcycles.
  • 【SPECIFICATION】:Premium EPDM Rubber&Brass Snap-in TPMS valve stem,Rim Hole Diameter in wheel:0.453inches(11.5mm).100 PSI maximum inflation pressure,Package:8PCS TR412 tire valve stem.
  • 【Easy to install】: With a bolted in design, this rubber tire stem is easy and convenient to install, keeping the tire inflated at a constant pressure level and allowing quick check of PSI.
  • 【GOOD After-sales Service】:Please feel free to contact us if you have any question with the tire valve stem,90 days free return or refund..
Check Stock

EZISOE 50Pcs TR415 Snap-in CA65 Copper Insert Standard Length Black Rubber Tire Valve Stem for Most Cars, Light Trucks, Small Trailers, wheelbarrows, Lawn mowers, ATVs, and Motorcycles

  • EPDM Rubber with Copper valve stem and valve core.
  • Quantity & Size: TR415 valve stems for tubeless 0.62” (15.8mm) diameter rim holes, these tire valves are 1.25" long and snap in easily to your tires. package contains the 50pcs rubber snap-in valve stems.
  • Widely use: Standard diameter of the snap-in valves makes them fit for most cars, light trucks, small trailers, wheelbarrows, lawn mowers, ATVs, and motorcycles.
  • Premium quality: 100% leakage tested, high quality and providing safe tire system and safe driving.
  • Easy to install: Deflate tire and breakdown tire off rim, Insert new stem from inside rim until it snaps into place.
Check Stock

CKAuto TR412 Rubber Snap-in Short Black Tire Valve Stem for Tubeless 0.453 Inch 11.5mm Rim Holes on Standard Vehicle Tires (50pcs/Bag)

  • High Quality: TR412 tire valve stems are constructed of high temperature brass valve cores and ozone resistant EPDM rubber,100% Ozone tested and leak tested.
  • Various Application: Snap-in valve stems for tubeless 0.453” (11.5mm) diameter rim holes, U.S. standard,providing safe tire system and safe driving, up to 65 PSI cold pressure per industry standard, durable and practical.
  • Easy To Install: with bolt-in design, these rubber tire valve stems are very easy and convenient to install,keep your tires inflated at a steady air pressure level and easily check PSI quickly.
  • Universal Rubber Stem: Valve stems are a standard diameter and fit for Cars, light trucks, small trailers, wheelbarrows, lawn mowers, ATVs, motorcycles.
  • Specification: CKAuto Brand Premium TR412 Rubber Snap-in Valve Stem ,Hole Diameter in Wheel:0.453 inches(11.5mm), Package Content: 50 x TR412 Tire Valve Stem.
Check Stock

CKAuto TR412 Rubber Snap-in Short Black Tire Valve Stem for Tubeless 0.453 Inch 11.5mm Rim Holes on Standard Vehicle Tires (5pcs/Bag)

  • High Quality: TR412 tire valve stems are constructed of high temperature brass valve cores and ozone resistant EPDM rubber,100% Ozone tested and leak tested.
  • Various Application: Snap-in valve stems for tubeless 0.453” (11.5mm) diameter rim holes, U.S. standard,providing safe tire system and safe driving, up to 65 PSI cold pressure per industry standard, durable and practical.
  • Easy To Install: with bolt-in design, these rubber tire valve stems are very easy and convenient to install, keep your tires inflated at a steady air pressure level and easily check PSI quickly.
  • Universal Rubber Stem: Valve stems are a standard diameter and fit for Cars, light trucks, small trailers, wheelbarrows, lawn mowers, ATVs, motorcycles.
  • Specification: CKAuto Brand Premium TR412 Rubber Snap-in Valve Stem ,Hole Diameter in Wheel:0.453 inches(11.5mm), Package Content: 5 x TR412 Tire Valve Stem.
Check Stock

Dr.Roc Tire Valve Stem Puller Tools Set –1 x Valve Stem Installer, 10 x Brass and Ozone Resistant EPDM Snap-in Tire Valve Stem with Valve Cores (6 x TR412,4 x TR413), 1 x Valve Core Remover

  • Valve Stem Puller-- For installation or removal of snap in type tubeless tire valves stems. Made of durable steel construction with soft rubber tube to protect wheels and rims from possible damage..
  • Premium Rubber Snap-in Valve Stems -- For safe tire system and safe driving. Constructed of brass and ozone resistant EPDM rubber. 100 percent leakage tested Providing safe tire system and safe driving..
  • Durable and Wide Tire Valve Core Remover - For quick removal or installation of tire valves cores. It is necessary tool to wring out the valve core when aerated or deflate the tire..
  • Widely use to repair tubeless tires for dirt bikes, sport bikes, motorcycles, ATV,UTV, lawn mowers, cars and trucks..
  • Package includes: 1* Valve Stem Installer, 6 * TR412 Valve Stems, 4 * TR413 Valve Stems, 1* Valve Core Remover..
Check Stock

CDWTPS TR415 Tire Valve Stem, Rubber Snap-in Short Black Tire Valve Stem for Tubeless 0.453 Inch 11.5mm Rim Holes on Standard Vehicle Tires(8pcs/Bag)

  • 【HIGH QUALITY】:The Tire Valve stem are constructed of high temperature brass valve cores and ozone resistant EPDM rubber,100% Ozone tested and leak tested, improve the safety of your vehicle..
  • 【FITMENT】:The Brass Snap-in valve stem is standard diameter and is suitable for any passenger car, Light Trucks, Small Trailers, wheelbarrows, Lawn mowers, ATVs, and Motorcycles.
  • 【SPECIFICATION】:Premium EPDM Rubber&Brass Snap-in TPMS valve stem,Rim Hole Diameter in wheel:0.625inches(16mm).100 PSI maximum inflation pressure,Package:8PCS TR415 tire valve stem.
  • 【Easy to install】: With a bolted in design, this rubber tire stem is easy and convenient to install, keeping the tire inflated at a constant pressure level and allowing quick check of PSI.
  • 【GOOD After-sales Service】:Please feel free to contact us if you have any question with the tire valve stem,90 days free return or refund..
Check Stock

RKX AC Compressor Control Solenoid Valve Compatible with Audi and Volkswagen Compressors made by Sanden PXE16 PXE14 MK5 MK6 B8 TDI

  • Highest quality control valve available GUARANTEED! Our valves feature premium quality materials and craftsmanship. All valves undergo rigorous quality testing and inspections. Our valves are manufactured in an ISO 9001, IATF 16949 certified facility..
  • PLEASE PHYSICALLY CHECK YOUR COMPRESSOR BEFORE ORDERING The manufacture used several suppliers for the AC compressor! This solenoid is only compatible with Sanden PXE16 PXE14 compressors held in with a snap ring and are visually identical..
  • Please note this is a new updated valve and may be longer than the valve found in your compressor. It is 100% compatible with the short style valve..
  • Compatible with Audi and Volkswagen vehicles from 2006 + including Jetta and Golf TDI. The OEM and other aftermarket brand solenoid have an EXTREMELY high failure rate! Will cause intermittent / no AC issues.
  • THIS IS VALVE IS SECURED INTO THE COMPRESSOR BODY USING A SNAP RING. If your valve is held in with a bolt please see our other listing. This part is only compatible with Sanden compressors. If you compressors is manufactured by another company please check our other listings..
Check Stock

100pcs TR415 Tire Valve Stem - Rubber Snap-in Valves, Tubeless Valve Stems Suit for 0.625 inch Rim Holes on Standard Vehicle Tires

  • Quantity & Size - Riseuvo TR415 valve stems for tubeless 0.625” (11.5mm) diameter rim holes, these tire valves are 1.25" long (effetive length) and snap in easily to your tires., package contains the 100pcs rubber snap-in valve stems..
  • Widely use - Standard diameter of the snap-in valves makes them fit for most cars, light trucks, small trailers, wheelbarrows, lawn mowers, ATVs, and motorcycles..
  • Keep in your vehicle - When replacing a tire, a tire technician should always replace the valve stem to ensure there are no issues with the tire changing process..
  • Premium quality - 100% leakage tested, high quality and providing safe tire system and safe driving..
  • Easy to install - Deflate tire and breakdown tire off rim, Insert new stem from inside rim until it snaps into place..
Check Stock

5pcs TR415 Tire Valve Stem Rubber Snap-in Valves, Tubeless Valve Stems Suit for 0.625 inch Rim Holes on Standard Vehicle Tires

  • Quantity & Size - Riseuvo TR415 valve stems for tubeless 0.625” (11.5mm) diameter rim holes, these tire valves are 1.25" long (effetive length) and snap in easily to your tires., package contains the 5pcs rubber snap-in valve stems..
  • Widely use - Standard diameter of the snap-in valves makes them fit for most cars, light trucks, small trailers, wheelbarrows, lawn mowers, ATVs, and motorcycles..
  • Keep in your vehicle - When replacing a tire, a tire technician should always replace the valve stem to ensure there are no issues with the tire changing process..
  • Premium quality - 100% leakage tested, high quality and providing safe tire system and safe driving..
  • Easy to install - Deflate tire and breakdown tire off rim, Insert new stem from inside rim until it snaps into place..
Check Stock

5pcs TR416 Tire Valve Stems - Outer Mount Metal Valve Stem High-Pressure Metal Clamp-in Valves for 0.453' and 0.625' Rim Hole

  • Quantity & Size – Riseuvo TR416 valve stems for tubeless 0.453” & 0.625″ (11.5mm & 16mm) diameter rim holes, these tire valves are 1-1/2″ long (effetive length) and snap in easily to your tires., package contains the 5pcs rubber snap-in valve stems..
  • Widely Applicable – Standard diameter of the snap-in valves makes them fit for most cars, heavy-duty trucks, larger trailers, wheelbarrows, lawn mowers, ATVs, and motorcycles..
  • Keep in your vehicle – When replacing a tire, a tire technician should always replace the valve stem to ensure there are no issues with the tire changing process..
  • Premium quality – 100% leakage tested, high quality and providing safe tire system and safe driving..
  • Easy to install – Deflate tire and breakdown tire off rim, Insert new stem from inside rim until it snaps into place..
Check Stock