Reviews Snap in Connector

3 Lead Cable Snap 6 Pins Connector

• Compatibility: AAMI All and others(please see the picture of the details).
• Distal Connector: Angle Connector Proximal Connector: Snap.
• Lead Number: 3. Total Cable Length: 11 ft. Lead Cable Material: TPU Jacket..
• Easy to clean and repair. Brand new and high quality product. Accurate measurement and fast responses..
• Packaging Included: 1 x 3 Lead Cable Snap Connector for AAMI.

LAMPVPATH (Pack of 5) I-Type 9V Battery Connector, 9 Volt Battery Clip, 9V Battery Clip Connector with Wire and Hard Buckle Plastic Housing

• Package: Includes 5 pcs I TYPE 9v battery connector.
• All these 9 volt battery connectors are with bare leads, all these 9 volt battery clip are with hard buckle plastic housing, no 9V battery is included in the package..
• Good Material of 9v battery clip: Very Hard Plastic ABS and Metal to make the sturdy house for 9v battery snap connector.(Means these 9v battery clip connector is designed not easy to pull apart when removing from the battery, they have longer life than other 9v snap connector that are just fixed on soft material).
• Size of 9 volt battery clips with wires( Each ): 2.4 x 1.2 x 0.7cm/0.94" x 0.47" x 0.28" with wire length approx. 15 cm/ 5.9 inches.
• Connection wires color of 9v connector: black and red..
• Function: These 9 volt battery connectors with clips are easy replace a broken battery connector on your electronic device, making removable power connections in home projects, they should be part of any experimenter or maker's kit..
• Attention: All these 9 volt battery clip connector are only suitable for 9v battery and 9v battery holders, please make sure this when buying this item, please do not apply them when your hands are wet..

Compatible Masimo Spo2 Sensor Probe 1863 LNCS DCI Reusable Sensor 3.2 ft 9 Pins Connector - Pronto-7, Rad-5, Rad-57, Rad-8, Rad-87, Radical-7

• Compatibility: AAMI All and others(please see the picture of the details).
• Distal Connector: 6 Pins Angle Connector. Proximal Connector: Snap.
• Lead Number: 5. Total Cable Length: 11 ft. Lead Cable Material: TPU Jacket..
• Easy to clean and repair. Brand new and high quality product. Accurate measurement and fast responses..
• Packaging Included: 1 x 5 Lead Cable Snap Connector for AAMI.

Techecook STV-90 Dryer Duct Connector fit 4in Vent Ducting - Dryer Snap to Vent 90 Elbow, Indoor Hook-up Dryer Vent Kit

• ✅【ITEM SPECIALITY & DURABLE】STV-90 Dryer Duct Connector is made to connect a semi rigid or flexible dryer hose with no hose clamps necessary. Our silicone seals give you a sealed dryer connection, making your dryer more efficient and clothes drying faster while consuming less energy and saving on electricity bills. The STV-90 lets you to push your dryer up against your wall without kinking or crushing the hose and losing airflow.
• ✅【PACKAGE INCLUDES】STV-90 Dryer Vent Connector Kit inclueds 1 x dryer vent elbow, 1 x snap connector, 1 x seal ring. The replacement part is made of silicone and other sturdy materials and well-tested by the manufacturer. You can install any 4" vent pipe or 4" flexible dryer hose, curved or straight to match.
• ✅【90-DAYS WARRANTY】Risk-free shopping.If the STV-90 Dryer Duct Connector has quality problem or you do not like it, we support return, replacement or refund. We are committed to providing the highest quality products and best prices to create the highest quality life for you. We will try our best to solve the problem. Customer satisfaction is our unremitting pursuit.
• ✅【COMPATIBLE MODEL】The Dryer Vent 90 Connector 5.5 in. L x 6 in. H x 4.25 in.Fit for most brands.This dryer hose connector is made to ....

Cairondin Patio Misters for Cooling Outdoor, 26FT DIY Misting System for Outside Umbrella Garden Backyard Trampoline, 7 Metal Mist Nozzles, a 3/4\ Brass Adapter

• ...nts. The mister system widely apply for patio backyard garden canopy pool umbrella deck trampoline awning porch gazebo fence chicken coop pergola greenhouse animal cage, etc.
• 【Premium Product Quality】Precision 3/4" brass adapter, sunlight resistant 1/4" flexible PU tubing, stainless steel mist nozzle, leak-proof connector, silicone filter mat, all parts are carefully made with premium materials, ensure that the entire misting system will not leak, not rust, not block, and have a longer life.
• 【Plug-in Mist Nozzle】Stainless steel plug-in mist nozzle, easy to install and pull out. The mist nozzle can be completely disassembled, easy to clean the dirt. When the mist nozzle is blocked by impurities and can’t be sprayed, you can easily solve it.
• 【Snap-on Connector】The connector has a snap-on design, and the mist tubing, mist nozzle and connector can be tightly connected, will not leak. Each connector is precisely manufactured, has good sealing, and will not leak due to excessive water pressure.
• 【Energy Saving and Clean Air】The misting cooling system directly use tap water to spray and cool down, no electricity consumption, no energy consumption, save more money for you. The mist cooling system continuously provides a very fine mist to absorb ....

Cairondin Misters for Outside Patio, 26FT DIY Outdoor Misting Cooling System for Garden Backyard Umbrella Trampoline, 7 Metal Mist Nozzles, a 3/4\ Brass Adapter

• ...nts. The mister system widely apply for patio backyard garden canopy pool umbrella deck trampoline awning porch gazebo fence chicken coop pergola greenhouse animal cage, etc.
• 【Premium Product Quality】Precision 3/4" brass adapter, sunlight resistant 1/4" flexible PU tubing, stainless steel mist nozzle, leak-proof connector, silicone filter mat, all parts are carefully made with premium materials, ensure that the entire misting system will not leak, not rust, not block, and have a longer life.
• 【Plug-in Mist Nozzle】Stainless steel plug-in mist nozzle, easy to install and pull out. The mist nozzle can be completely disassembled, easy to clean the dirt. When the mist nozzle is blocked by impurities and can’t be sprayed, you can easily solve it.
• 【Snap-on Connector】The connector has a snap-on design, and the mist tubing, mist nozzle and connector can be tightly connected, will not leak. Each connector is precisely manufactured, has good sealing, and will not leak due to excessive water pressure.
• 【Energy Saving and Clean Air】The misting cooling system directly use tap water to spray and cool down, no electricity consumption, no energy consumption, save more money for you. The mist cooling system continuously provides a very fine mist to absorb ....

4 Count TENS Wires Electrode Wires for TENS Unit Electrodes Lead Wires for TENS

• Used on 3.5mm Plug TENS to 3.5mm Snap electrodes.
• Premium TENS/ EMS Accessories: high quality and durable lead wires'.
• Fits TENS, EMS in the market with 3.5mm snap connector.
• Wire Plug 3.5 mm, Snap Diameter: 3.5mm, Wire Length: 59 inches/ 150cm.
• Please kindly note that these are 3.5 mm Plug to 3.5mm Snap lead wires. Your machines might need the 2.5mm Plug instead. Please kindly follow our pictures to make a quick check if you are not sure..

4X 1.5V 6V AA Battery Holder Bundle Case Back Cover and 9V I Type Snap Batteries Clip Connectors Buckles with Cord Wire Leads Plastic Housing Spring Clip Storage Box Pack of 3

• 4 x AA battery box , 4 x 1.5V (6V) AA battery holder..
• Battery Holder Case Size : 6 x 6.3 x 1.6cm/2.36" x2.48" x0.63 "(L*W*H),The battery holder is made of high quality ABS plastic, nickel-plated spring to....
• 9V I Type Snap Connector Size( Each ) :2.4 x 1.3 x 1cm/0.94" x 0.51" x 0.39" with wire length 14cm/5.5" ,I type 9V battery clip connector, plastic....
• The battery holder is made of high-quality plastic ABS and metal materials to keep the battery in place.it can put standard or rechargeable batteries....
• Package : 3 Pcs 4 Slots x 1.5V AA Battery Holder 3 Pcs I Type Snap Connector Plastic ..

AA Battery Holder Besmelody 4 x 1.5V 6V AA Battery Storage Box with 9V Snap Clips Connector Plastic Housing 2 Layers Battery Case

• AA battery holder with 9V snap connector is designed for 4-slot 1.5V AA standard or rechargeable batteries.
• 4 AA Battery Holder Body Size: 6 x 3 x 3cm /2.36" x 1.18 " x 1.18 "(L*W*H).
• Battery holder is made of ABS plastic with nickel plated springs, holding the batteries tight in place.
• Great for Arduino boards micro-controllers, led projects, toys, also replaces broken battery holders for many electronic devices.
• Package Contents: 2x 4 AA Battery Holder.
• Besmelody 18-month warranty and friendly customer service..

Hubbell Wiring Systems SFHC14BK HDMI Keystone Snap-Fit Screw Terminals Black

3M Male SNAP Plug, Nylon Insulated with Insulation Grip

Honeywell Ademco Miller Twin Turbo 6-Foot Fall Protection System with G2 Connector and Aluminum Locking Rebar Hooks (MFLC-12-Z7/6FT)

• CONTINUOUS 100% TIE-OFF FALL PROTECTION: G2 connector attaches to harness webbing below the D-ring, and connects to two Miller TurboLite PFLs (6ft or 9ft) for continuous 100% tie-off fall protection.
• SAFER ALTERNATIVE TO DOUBLE-LEG LANYARDS: Reduces fall clearance requirements for use in more applications than double-leg lanyards.
• PFLs swivel to prevent webbing from twisting & binding inside unit.
• LIGHTWEIGHT G2 TWIN CONNECTOR: Twin Turbo G2 Connector is extremely lightweight to reduce worker fatigue and increase productivity.
• webbing retainer clip rotates freely to prevent gate activation.
• GREATER MOBILITY & PRODUCTIVITY: PFLs swivel independently in multiple directions to optimize worker mobility and versatility.
• this eliminates equipment switch-outs and increases overall productivity.
• MULTIPLE LANYARD END CONNECTOR OPTIONS: Lanyard end connector options include steel & aluminum locking snap hooks and steel & aluminum locking rebar hooks.

LAMPVPATH (Pack of 2) 8 AA Battery Holder, Two Layers Battery Case, 12v AA Battery Holder, 8 AA Battery Holder with Leads with (Pack of 2) I Fonts Clip Connector

• Battery Holder Type: 8 x aa battery holder, 12 volt battery holder.
• Construction: Two layers,each layer can load 4 AA batteries,totally can load 8 AA batteries.
• Voltage Output of 8 Cell AA Battery Holder : 12V, 8 x 1.5V aa battery= 12v battery holder.
• Dimensions of 12v AA Battery Holder(L*W*H): 4.37" x 1.30" x 1.22"/11.1cm x 3.3cm x 3.1cm.
• With 9V Snap Connector Size: 0.94" x 0.51" x 0.39"/2.4cm x 1.3cm x 1cm with wire length 14.5cm/5.7".
• Weight: 14g/0.50oz(one 8aa battery holder and one 9V battery connector).
• Package Content : (2 Pcs) Two Layers 8 AA Battery Holder for 8 AA Batteries with (2 Pcs) 9V I Type Snap Connector.