Reviews Small Shim Stock

StewMac Acoustic Guitar Neck Shims Maple - Set of 10

  • Fitting an acoustic guitar neck into a dovetail joint is precise work - many times you need to shim a loose side of a dovetail when fitting the neck.
  • This wafer thin shim stock is well made for a clean fit, and is just large enough to create a taper or wedge.
  • Maple shim stock is a problem solver in a busy repair shop, and we found this size has a million uses around the shop—from shimming a saddle, to....
  • Each shim is a 2" x 5" rectangle, approximately 0.022" (0.55mm) thick.
Check Stock

8 Pieces Brass Sheet Brass Shim Stock Assortment 6 Length x 3 Width 0.001 0.002 0.004 0.006 0.008 ,0.012 0.016 0.02 Thickness Brass Metal Shim Stock

  • ✔----- Our brass shim stock assortment include 8 thicknesses, which can meet your different needs in daily life. You deserve it..
  • ✔----- Brass sheet is made of quality brass material, nice bend-ability and can be machined and cut into various parts such as gaskets, washers, shims and spacers..
  • ✔----- Brass shim stock is nicely polished up and cut, has high strength and hardness, no scratches and very smooth, safe to use..
  • ✔----- Brass shim widely used in jewelry, crafts, maintenance, electrical, DIY projects, architectural decoration, industry, thermal conductivity, etc..
  • ✔----- Shim stock assortment size: 6" Length x 3" Width, 0.001", 0.002", 0.004", 0.006", 0.008",0.012", 0.016", 0.02" Thickness, you will use them one day..
Check Stock

Stainless Steel Shim Stock 304 Stainless Steel Shim Stock Roll Full Hard Temper 50 Long x 6 Wide x 0.001 Thick

  • ✿---- Stainless steel roll shim stock is made of premium 304 stainless stell which has excellent corrosion resistance performance and widely loved by people..
  • ✿---- Only corrosion-resistance is not enough, our stainless steel shim stock is also rustproof, high temperature resistance, duarable, it is the excellent material of industry or daily life..
  • ✿---- High toughness is another highlights, stainless steel roll can be bent or cut, smooth surface without burrs, if you need it, please take it home..
  • ✿---- Stainless steel roll shim stock size: 50" Long x 6" Wide x 0.001" Thick, hard and strong, widely used in applications where corrosion resistance is highly required..
  • ✿---- Multifunction stainless steel foil plate sheet widely used for all kinds of gaskets,mechanical parts,electronic components,metal stamping parts,chemical equipment,machine repair and maintenance,precision machinery,and so on..
Check Stock

316 Stainless Steel Shim Stock 0.001 Thickness x 6 Width x 12 Length Stainless Steel Sheet Shim 2 Pieces

  • ✿ 316 stainless steel shim stock is made of superior soft temper material, has a better corrosion resistance performance than 304 stainless steel..
  • ✿ Better material means better quality, our 316 stainless steel shim has good machinability, rust resistance,high temperature resistance..
  • ✿ Stainless Ssteel shim stock widely used in precision machinery, electronic equipment, mold manufacturing, processing equipment, mechanical parts, stamping parts, hardware manufacturing, ect.
  • ✿ Size：0.001" thick x 6" width x 12" length， 2 pack, very easy to cut and form, you will never be disappointed..
  • ✿ Reliable Service: As we are so strict with our quality, we have confidence. So we would refund 2 times price if you receive defective product..
Check Stock

Valve Spring Shim - 1.500\ OD.645\ ID .060\ Thickness

  • Must-Have for Your Next Engine Build or Spring Upgrade - Production tolerances in cylinder heads, valve lengths, valve springs, retainers and locks can impact the valve spring installed height from valve to valve, greatly impacting spring seat and open pressures. COMP Cams spring shims are a must-have to ensure precise installed height on intake and exhaust valves..
  • Guaranteed Precision - COMP Cams shims are crafted from the finest shim stock steel to precise dimensions, ensuring consistent installed height adjustments from the first valve to the last..
  • Race Tough - COMP Cams valve spring shims are not only made from the highest quality shim stock available, they are also heat treated to withstand the most radical camshaft profiles..
  • 1.500" Outside Diameter, 0.645" Inside Diameter. Includes 1 0.060" Thick Shim..
  • Recommended for use with our 916, 26056, 917, 928, 929, 924, 925, 911, 954, 936, 938, 930, 953, 999, 26094, 943, 26055, 939, 927, 919, 933, 935, 944, 26095, 26097, 932, 26089,955, 26115, 26099 and 26547 springs..
  • Available in an assortment pack under part number 4757..
Check Stock

9 Piece Punch & Die Set Metal Punch Tool for Cutting Coins Metal Plastic-with Clear Acrylic Guide

  • See What You Cut- Clear plate guide for easy alignment and placement Accurate to within 0.002 inch.
  • Precise Cuts- Hole punch set made from precision ground hardened alloy steel- 9 pieces for a variety of hole sizes.
  • Backed by Amazon's A-Z Guarantee with Prime available and a 1 year manufacturer guarantee.
  • Many Uses- Works well for metal shim, brass shim stock, sheet styrene, leather punch, paper, decal stock, coin ring making, and model ship building.
  • Well Oiled And Ready To Cut- Normal to see grease on the unit Capacities: 20 Gauge Steel Sheet, 13 Gauge Aluminum & Brass.
Check Stock

Acrylic Guide Punch and Die Panel Replacement Part Only for Jounjip Truepower Harbor Freight 9 Piece Punch And Die Set

  • See What You Cut- Clear plate guide to easily align coins, metal, leather to make precision hole punches.
  • Easy To Install- Simply unscrew the hex screws with provided hex key and replace old broken panel.
  • Backed by Amazon's A-Z Guarantee with prime available and a 1 year manufacturer guarantee.
  • Center the alignment punch set by inserting all 9 pieces through their respective holes.
  • Many Uses- Works well for metal shim, brass shim stock, sheet styrene, leather punch, paper, decal stock, coin ring making, and model ship building.
Check Stock

Valve Spring Shim Kit - 1.300\ OD.520\ ID .030\ Thickness

  • Must-Have for Your Next Engine Build or Spring Upgrade - Production tolerances in cylinder heads, valve lengths, valve springs, retainers and locks can impact the valve spring installed height from valve to valve, greatly impacting spring seat and open pressures. COMP Cams spring shims are a must-have to ensure precise installed height on intake and exhaust valves..
  • Precision - COMP Cams shims are crafted from the finest shim stock steel to precise dimensions, ensuring consistent installed height adjustments from the first valve to the last..
  • Race Tough - COMP Cams valve spring shims are not only made from the highest quality shim stock available, they are also heat treated to withstand the most radical camshaft profiles..
  • 1. 300" Outside Diameter, 0. 520" Inside Diameter. Includes 16 0. 030" Thick Shims..
  • Recommended for use with ~ 1. 300" Outside Diameter or smaller like our 26915 Beehive and 7228 Conical Spring..
Check Stock

Air Shim Bag - 3 Pack

  • Air Shim Bag – 3 PCS Pack. 3 sizes in Small, Medium, and Large, to meet a variety of work needs..
  • Air Shim Bag – A variety of purposes, including moving and adjusting the level..
  • Air Shim Bag – Allows a single installer to hold the unit in place, accurately adjust and level..
  • Air Shim Bag – Improve work efficiency and reduce unnecessary labor..
  • Air Shim Bag – ABS+TPU+420D nylon commercial grade quality, durability and performance..
Check Stock

Brass Strip Brass Shim Stock Assortment 1 Width x 6 Length 0.002 0.004 0.006 0.008 0.012 and 0.016 Thickness 6 Pieces

  • With 6 thicknesses to meet your different needs, this is a great value set of brass shim stock..
  • Brass shim stock assortment size: 6" Length x 1" Width, 0.002", 0.004", 0.006", 0.008", 0.012" and 0.016" Thickness.Nicely polished up..
  • Brass sheet is made of brass material, nice bend-ability and can be machined and cut into various parts such as gaskets, washers, shims and spacers..
  • Metal sheets plates widely used in jewelry, crafts, maintenance, electrical, DIY projects, architectural decoration, industry, thermal conductivity, etc..
  • Reliable service: As we are so strict with our quality, we have confidence. So we would refund 2 times price if you receive defective product..
Check Stock

Brass Sheet Brass Shim Stock Assortment 6 Length x 4 Width 0.001 0.002 0.003 0.005 and 0.01 Thickness Metal Sheets Plates 5 Pieces

  • With 5 thicknesses to meet your different needs, this is a great value set of brass shim stock..
  • Brass shim stock assortment size: 6" Length x 4" Width, 0.001", 0.002", 0.003", 0.005" and 0.01" Thickness.Nicely polished up.
  • Brass sheet is made of brass material, nice bend-ability and can be machined and cut into various parts such as gaskets, washers, shims and spacers..
  • Metal sheets plates widely used in jewelry, crafts, maintenance, electrical, DIY projects, architectural decoration, industry, thermal conductivity, etc..
  • Reliable service: As we are so strict with our quality, we have confidence. So we would refund 2 times price if you receive defective product..
Check Stock

Brass Sheet Brass Shim Stock Assortment 6 Length x 3 Width 0.002 0.004 0.006 0.008 ,0.012 and 0.016 Thickness Brass Shim Stock 6 Pieces

  • With 6 thicknesses to meet your different needs, this is a great value set of brass shim stock..
  • Brass shim stock assortment size: 6" Length x 3" Width, 0.002", 0.004", 0.006", 0.008",0.012" and 0.016" Thickness. Nicely polished up..
  • Brass sheet is made of brass material, nice bend-ability and can be machined and cut into various parts such as gaskets, washers, shims and spacers..
  • Metal sheets plates widely used in jewelry, crafts, maintenance, electrical, DIY projects, architectural decoration, industry, thermal conductivity, etc..
  • Reliable service: As we are so strict with our quality, we have confidence. So we would refund 2 times price if you receive defective product..
Check Stock

Shim Stock Assortment 0.0005 - 0.005 Plastic - 7 Sheet of 5 x 5 of Polyester Shim Stock LittleMachineShop.com 4304

  • 7 sheets of 5" x 5" sheets of polyester shim stock.
  • Thickness tolerances to industry standards.
  • 0.0005", 0.001", 0.0015", 0.002", 0.003", 0.004", and 0.005".
  • About Us - LittleMachineShop.com is a small U.S. business specializing in sourcing and selling quality machines, tooling, spare parts, and accessories for home shop machinists and small machine shops. Additionally, we sell upgrades and accessories for many of the leading brands. Whenever possible, we work with, and promote, other small US machinists and machine shops who sell innovative products. With direct US based customer support from our knowledgeable team, we stand behind all our products..
Check Stock