Reviews Small Screws

2 Sets Adjustable Clippers Blades, 2 Hole Hair Trimmer Replacement Blade (Silver)

  • ...ial can be applied for a long time, it is more pointed and stronger, thus it can work efficiently and provide better effects.
  • How to replace: adjust the blade to full forward position, and put the small top blade over the clipper drive finger, then place large bottom blade on top of small top blade, replace the screws and partially tighten.
  • Make sure the extreme left hand tooth of top blade must be on the first small tooth of bottom blade.
  • After blade is aligned, tighten screws, turn switch on and off a couple of times, and then check alignment of blades.
  • Wide compatibility: these 2 hole clipper replacement blades are compatible with 8148, 8504, 1919, 2241, 2240, 8591.
  • Different from the size of screws, there are large screws and small screws, 8148, 8504, 2241, 2240 are small screws, 8591 and 1919 are large screws.
  • Functional and practical: these replacement blades are designed with 2 holes for easy using, 2 different sizes of hole diameter are provided for your clipper, including 3 mm and 1 mm, they can be attached easily and also convenient to maintain, in addition, this blade can provide an even and clean hair cutting option.
  • Package content: package contains 2 sets of clipper blades, convenient for your daily use and replacement.
Check Stock

Magnetic Mat, Magnetic Project Mat, Unamela Large Size Writing Note Mat with Dry Erase Pen - Preventing Losing Screws When Repairing Cell Phone, Laptop or Other Electronics

  • 【Upgraded Version】Updated magnetic mat for screws magnetize more small screws or other tiny mental accessories when you repairing Mobile electronic equipment, and it helps you work more organized and tidy. No more waste time searching for the small screws, nails, bolts, pins, anchors, drills & screwdriver bits, or any small metallic objects. Highly improve your working efficiency 40%..
  • 【Record Anytime】This magnet pad for screws dry erase surface and included marker allows the user to not only annotate the original location of screws and process of repairing, but also record any of your thoughts..
  • 【Category Placement】The project mat has a 5 x 4 printed grid that facilitates the classification of small screws and small parts and keeps them in order, which makes your repairing always organized and convenient..
  • 【Quality Comes First】The magnetic project work mat upgraded into 11.8*9.8 inches, which have more than 20% space for you to hold more screws. It was made by PVC material with water resistance, even stubbornly attached handwriting is available to wipe out with wet wipe and microfiber cloth. It's rewritable and more convenient without looking for any pen erasers..
  • 【More Applications】In addition, this rewritable magnetic project pad c....
Check Stock

Lightweight Finger StrengthTool for Beginner Training YF-675(Red)

  • Perfect tool for practicing and refining your Flip playing skills and techniques.
  • The blade is dull without edge.Tactical Training tool..
  • Bearings connection for handle make it more smooth when playing..
  • G10 material handle is lighter and confortable and abrasion resistant..
  • NOTE:1.IF the screws loose or fell off while flip. the screws can be installed back again, if you can't find the screws, you contact with seller for new screws for repairing. 2. Sometime,we may include a small screwdriver in the package,the small screwdriver tool is just a small free gift for buyer, please kindly don't leave low rating due to the screwdriver broken or something. thanks.
Check Stock

Toptens Finger Strength Stick for Beginner YF-675 (Orange)

  • perfect tool for practicing and refining your flip skills and techniques.
  • The blade is dull without edge, You can practice without harmful.Tactical Combat Training tool..
  • Bearings connection for handle make it more smooth when playing..
  • G10 material handle is lighter and confortable and abrasion resistant..
  • NOTE:1.IF the screws loose or fell off while flip. the screws can be installed back again, if you can't find the screws, you contact with seller for new screws for repairing. 2. Sometime,we may include a small screwdriver in the package,the small screwdriver tool is just a small free gift for buyer, please kindly don't leave low rating due to the screwdriver broken or something. thanks.
Check Stock

3 Sets Hair Clipper Replacement Blades Adjustable Clipper Blades 2 Hole (1mm - 3mm) Hair Trimmer Replacement Blades Compatible with 8148, 8504, 1919, 2241, 2240, 8591 (Silver)

  • Wide compatibility: these 2 hole clipper replacement blades are compatible with 8148, 8504,1919, 2241, 2240, 8591.
  • Different from the size of screws, there are large screws and small screws, 8148,8504,2241,2240, both of which are small screws, 8591 and 1919 are large screws.
  • How to replace: simply remove both screws from the blade, remember to clean dirt and hair from the clipper with brush before replacement, and oil the underside of the bottom blade, then place the small top blade on the clipper and put the large bottom blade on top with the flat side facing towards the top blade, finally, tighten the screws to hold the blades in place.
  • Quality material: these adjustable clipper blades are made of stainless steel with precision ground finish to ensure you a stable, even and clean cut, which is corrosion-resistant, wear-resistant and durable for a long-term using.
  • Main function: our hair trimmer replacement blades designed with extended blade cutting area allows hair to flow into the cutting blades for fast and accurate cutting, improving the quality of your cutting experience, easy to replace and maintain.
  • What you get: package contains 3 sets of adjustable clipper replacement blades, the sufficient quantity is convenient for you to replace i....
Check Stock

Picture Frame Hardware Backing Clips, 100 Pieces Photo Frame Turn Button Fasteners with 100 Pieces Screws Picture Framing Parts for Hanging Posters Drawing Crafts, Black

  • Small frame turn button: this set of frame turn button is 2 cm in length, 0.9 cm in width, suitable for small pictures or photos.
  • Black screws: there are 100 pieces of black screws, they are 0.8 cm in length and 0.5 cm in width, just fit for the frame turn button.
  • Hard material: the frame turn button and screws are made of iron, hard and durable, with paint plated on the surface, it is difficult for them to get rusty.
  • Wide application: this set of frame turn button and screws can be applied in many occasions, such as hang pictures on the wall or make some art works with these small items.
  • Package includes: 100 pieces of frame turn button and 100 pieces of screws, enough for you to use.
Check Stock

3 Sets Hair Clipper Replacement Blades Adjustable Clipper Blades 2 Hole (1mm - 3mm) Hair Trimmer Replacement Blades Compatible with 8148, 8504, 1919, 2241, 2240, 8591 (Gold and Silver)

  • Wide compatibility: these 2 hole clipper replacement blades are compatible with 8148, 8504,1919, 2241, 2240, 8591.
  • Different from the size of screws, there are large screws and small screws, 8148,8504,2241,2240, both of which are small screws, 8591 and 1919 are large screws.
  • How to replace: simply remove both screws from the blade, remember to clean dirt and hair from the clipper with brush before replacement, and oil the underside of the bottom blade, then place the small top blade on the clipper and put the large bottom blade on top with the flat side facing towards the top blade, finally, tighten the screws to hold the blades in place.
  • Quality material: these adjustable clipper blades are made of stainless steel with precision ground finish to ensure you a stable, even and clean cut, which is corrosion-resistant, wear-resistant and durable for a long-term using.
  • Main function: our hair trimmer replacement blades designed with extended blade cutting area allows hair to flow into the cutting blades for fast and accurate cutting, improving the quality of your cutting experience, easy to replace and maintain.
  • What you get: package contains 3 sets of adjustable clipper replacement blades, the sufficient quantity is convenient for you to replace i....
Check Stock

Hidden Truth

  • Small Red dot adjustment:Steps adjust the mini red dot,①:twist and loosen the two screws above the switch (SET SCREWS)②:if you need to adjust the up and down direction of the front sight, please adjust the screws above the red dot (UP) ③:if you need to adjust the left and right wind direction of the front sight,please adjust the screws to the right of the red dot (R)④:after adjusting the up and down and wind direction, please lock the two screws (SET SCREWS).
  • Please note that when adjusting the red dot front sight, the red dot is fixed up and two parallel dots are set as reference points at a distance, (the effect is not obvious at close range)..
  • Dimensions: 40 mm (length) x 28 mm (width) x 35 mm (height) PLEASE NOTE THAT this item is fit for most of the tools,NOT ALL. Please see the size whether you need before buy it. If there is any questions, please contact us first..
  • This small red dot contains a separate switch with 3 steps for OFF, LOW BRIGHTNESS, HIGH BRIGHTNESS. Scope of application: 30-100m..
  • Package includes:1 x 3MOA Red Dot + 1 x Battery Backup + 2 x Hexagonal Screwdriver + 1 x User Manual + 1 x Dust Free Cloth..
Check Stock

MEIYYJ 10 Kinds Small Multi-Purpose M1 M1.2 M1.4 M1.7 Phillips Head Micro Screws Self-Tapping Electronic Screws Assortment Kit Pack of 1000

  • High Quality:This small screws assortment kit is a small size self-tapping screw. Different Sizes,Flat Thin Head Small Phillips Screws.
  • Material Types:Carbon steel.10 Kinds M1 M1.2 M1.4 M1.7 PA Phillips Self-Tapping Electronic Screws.
  • The Small phillips Screws Assortment Kit Can be used for watches,clocks,Mobile phone,Computers etc.
  • Packed in plastic box.The box design is nice and easy to take right screw out..
Check Stock

Triumph Press Fit Ladderball Set - Includes 6 Soft Bolas and Carry Case

  • QUICK AND EASY ASSEMBLY: Our best all-steel press fit ladder toss set assembles in seconds with no need for screws, knobs, or loose parts.
  • DURABLE STEEL FRAME: Strong polymer connecting joints hold the steel frame together without the need for screws.
  • NO SCREWS OR SMALL PARTS: 36" high x 23" wide metal ladderball frame secures to slotted steel legs with no screws or small parts.
  • HARDWARE FREE FRAME: The patent-pending hardware-free frames consist of 7 steel pieces per ladder.
  • ACCESSORIES INCLUDED: Includes six soft ball bolas (three blue and three red bolas) and a durable sport bag for easy portability and storage.
Check Stock

100 Pcs 5 Size #8 White Screws White Head Screws White Coated Screws Covers Head Wood Screws Wall Plate Screws Stainless Steel Screw Self Tapping Screw for Switches Cover (0.5/0.75/1/1.25/1.5 inch)

  • 【Advanced material】:The phillips flat head wood screws set made of high quality Carbon Steel with Black Oxide Finish so that the screws are good to resistant to rust and good corrosion resistance in bad environment,great quality and durable.
  • 【Various Sizes】:This Small Wood Screws Assortment Kit provide you with 8 common sizes from short to long, and for your convenience, we list the sizes both of US size and Metric Size: 6mm or 1/4'' , 8mm or 5/16'' , 10mm or 3/8'' , 12mm or 1/2'' , 16mm or 5/8'' , 20mm or 3/4'' , 25mm or 1'' , 30mm or 1-1/4'' . This small flat screws set and M6 screw anchors, meet all your demands..
  • 【Multifunctional】:These M3 screws set fasteners can be used on a wide variety of woodworking projects and are ideal for home, office, and building use.Typical uses are for hanging nails, installing drywall, repairing wood furniture,cabinets and machine, etc..
  • 【Easy to Install】:This short wood screws have a sharp point in the tail that helps you easy to penetrate the material.
  • the deep and sharp thread coarse design can easily effectively grab wood stubs, and can ensure a secure hold, is also not easy to deform and slid while using ,it is your good assistant in any woodworking..
  • 【Valid Assortment Storage】: This multiple si....
Check Stock

30 Packs Kitchen Cabinet Knobs Brushed Nickel Silver - Pull Hardware Handle, Drawer knobs for Kitchen Cupboard Door, Bedroom Dresser Drawer, Bathroom Wardrobe Hardware with Long Short Screws

  • Easy to Install - 30 pieces small silver cabinet knobs Come with two sizes screw, 30 pieces long screws and 30 pieces short screws. Suitable for most cabinet and furniture.
  • Wide Application - The mini drawer pulls and knobs can be used on a kitchen cabinet, furniture door, closet, cupboard, desk drawer, wardrobe drawers and bookcase, where black cabinet pulls are needed..
  • Durable Design & Fine Touch - Small and light Weight. With advanced technique, the door pulls are made to be long-lasting, accompanied with good looking and fine touch..
  • Package Include - 30 pieces small cabinet knobs, 30 pieces long mounting screws, 30 pieces short mounting screws. Suitable for most thicknesses..
  • Please Note Before Purchase - The product is made of Aluminum Alloy, Hollow, Non-Solid Light Weight, Not Plastic Material. If you have any issues, please contact us..
Check Stock

UniqueFire Black 3MOA Tactical Compact Holographic Reflex Mini Micro RMR Red Dot Sight Scope

  • Small Red dot adjustment:Steps adjust the mini red dot,①:twist and loosen the two screws above the switch (SET SCREWS)②:if you need to adjust the up and down direction of the front sight, please adjust the screws above the red dot (UP) ③:if you need to adjust the left and right wind direction of the front sight,please adjust the screws to the right of the red dot (R)④:after adjusting the up and down and wind direction, please lock the two screws (SET SCREWS).
  • Please note that when adjusting the red dot front sight, the red dot is fixed up and two parallel dots are set as reference points at a distance, (the effect is not obvious at close range)..
  • Dimensions: 40 mm (length) x 28 mm (width) x 35 mm (height) PLEASE NOTE THAT this item is fit for most of the tools,NOT ALL. Please see the size whether you need before buy it. If there is any questions, please contact us first..
  • This small red dot contains a separate switch with 3 steps for OFF, LOW BRIGHTNESS, HIGH BRIGHTNESS. Scope of application: 30-100m..
  • Package includes:1 x 3MOA Red Dot + 1 x Battery Backup + 2 x Hexagonal Screwdriver + 1 x User Manual + 1 x Dust Free Cloth..
Check Stock