Reviews Small Gas Dryer

279834 Gas Valve Ignition Solenoid Coil Kit by Beaquicy - Replacement Part for Ken-more Whirlpool Samsung Estate Magic Chef Dryer - Replaces ap3094251

  • ✅ 【ULTRA DURABLE PRODUCT】: The 279834 Gas Valve Coil Set is suitable for dryers. The 279834 dryer valve ignition solenoid kit has a 3-terminal boost/hold coil and a 2-terminal secondary coil.This is a safety mechanism to ensure that there is no unsafe gas accumulation in your device. When the igniter reaches a sufficiently high temperature, these coils open the gas valve, allowing gas to enter the burner..
  • ✅ 【PRODUCT PACKAGE】:Includes 1 Pair x 279834 dryer gas valve ignition solenoid coil kit.279834 Gas Valve Ignition Solenoid Coil Kit includes two new gas coils. One coil is the primary coil and the other is the safety coil. No matter which component stops working, it should be replaced in pairs.Because both coils must be operable,then the valve can be opened,and the heating element will work normally.The kit can replace most new style gas coils..
  • ✅【365 DAYS WARRANTY】:279834 Gas Valve Coil Set supports 365 days return and exchange.Our company attaches great importance to the shopping experience of each customer.Risk-free shopping, If you have any quality problem during warranty period, please contact customer service in time. We will try our best to solve the problem. Customer satisfaction is our tireless pursuit..
Check Stock

Appliance Pros Flexible Stainless Steel Gas Line for Dryer Gas Hose Connector Kit Comes with 1/2 OD 1/2 MIP x 1/2 FIP Stainless Steel GASLINE72

  • GAS DRYER INTENDED - A stainless steel gas line hose designed mainly for gas dryers. It measures 72" and has an inner dimension of 3/8". Other....
  • CORRUGATED DESIGN - Achieve full flexibility, because, with this corrugated gas appliance connector, lets you snake it into small spaces including....
  • PREMIUM QUALITY - A corrugated stainless steel gas dryer hose that has compression fitting to create a secure metal connection for heavy-duty use.....
  • CONVENIENT INSTALL - No tools required to install the piping. It features male and female iron pipes for easy connections. Just make sure your sizing....
  • ONE YEAR WARRANTY - With no compromise to quality, we provide premium durable products for the long-term, which is a seal to ultimate safety. This....
Check Stock

Beaquicy TDIDVKZW Indoor Dryer Vent Kit with 4 Inch by 10 Feet Flexible Clothes Dryer Duct

  • ✅【CHOICE NOT TO BE MISSED】--- The TDIDVKZW Indoor Dryer Vent Kit is for venting electric dryers indoors to trap lint. Due to potentially harmful fu.mes and exhaust gas.es, this item is not recommended for use in gas dryers. Duct has a 4-in diameter and extends to 10-ft in length. The package includes 1 x 4-inch by 10-feet proflex dryer transition duct,1 x plastic lint reservoir, 2 x plastic adjustable clamps. It includes Installation ring so it can be hung close to a dryer on a wall or wall stud..
  • ✅【USER FRIENDLY】---TDIDVKZW Indoor Dryer Vent Kit is for venting electric dryers indoors to trap lint. It is made of quality materials to prevent crushing or other possible damage to the kit. The pipes are flexible and soft, and can be installed quickly and easily, and it can be used when it is connected to the clothes machine. The indoor dryer vent kit is detachable and can be reused after cleaning. Ideal for apartments, condominiums and R.V.s but should not be used with gas clothes dryers..
  • ✅【MADE OF DURABLE MATERIAL】 --- This TDIDVKZW Indoor Dryer Vent Kit is made from durable high quality material to prevent crushing or other possible damage to the kit. Well-tested by the manufacturer, non OEM but quality equal to OEM requirements. High ....
Check Stock

383EEL3002D Dryer LP Gas Conversion Kit Replacement Part for LG Kenmore Dryer by Rayhoor- Replaces 383EEL3002D, B00AMF8ETW

  • 【Perfect Replacement】Our 383EEL3002D Dryer LP Gas Conversion Kit replaces part numbers: 1617105, AH3522300, AP5204371, EA3522300, PS3522300, LP11835..
  • 【Widely Applicable】Compatible with most top name brand dryers: LG, Kenmore, Kenmore Elite and others.
  • Fits these models: DLGX5102V, DLGX5102W, RN1317AS, DLG3181W, RN1317TS, 79679002000, 79671553610, DLGX9501K, 79691393610, etc..
  • 【Function】383EEL3002D Dryer LP Conversion Kit converts a natural gas dryer to operate on liquid propane, and the LP orifice in this kit replaces the natural gas orifice that is installed on the gas burner in the dryer..
  • 【Premium Quality】High quality material and well-tested by the manufacturer designed to fit your dryer perfectly..
  • 【Money-Back Guarantee】If there is anything you are not satisfied, please feel free to contact us and we will offer you a replacement or full refund. High-quality products and service is our priority..
Check Stock

Deflecto Extra Heat Dryer Saver, Accommodates 4\ Transition Ducts, Includes 2 4\ Plastic Clamps, White (EX12)

  • Save the heat from your clothes dryer and divert it into your home with our Extra Heat Dryer Saver.
  • Adjustable flap deflects heat and humidity inside during cold weather and deflects them outside during warm weather.
  • Clean filter screen after each use for optimal performance and safety.
  • Do not vent gas clothes dryers into bathrooms or bedrooms.
  • Some building codes may restrict the use of this product, always check the local codes in your area.
  • Open doors in small rooms for adequate distribution of heat and moisture.
  • Use with UL listed Supurr-Flex clothes dryer transition duct (not included).
  • Product Dimension: 7.875 X 5.875 X 5.375 Inches.
Check Stock

IKENIUP One Stop Gas Appliance Hook Up Kit, 22'' Stainless Steel Flexible Gas Connector with 1/2''Brass Gas Shutoff Valve for Gas Log, Gas Dryer, Garage Heater, Gas Stove, Wall Heater and Fireplace

  • ...Pipe), 1/2" brass gas shut off valve, and yellow gas pipe thread seal tape. It has everything needed for installing most gas appliances and easy to install..
  • HIGHLY DURABLE & LONG SEVERITY LIFE - Made of High Quality 304 Stainless Steel. Designed for safe, optimal flow rate, the flow capacity is up to 150K BTU. This dryer gas line kit is 100% Leak Tested, CAS certified.
  • it has good air tightness, durability, rust and corrosion resistance. It is the perfect choice for hooking up your gas appliances..
  • CORRUGATED DESIGNED - The stainless steel gas line is designed with corrugation, which has high-level flexibility and is not easy to be damaged. Can be better used in a narrow range. Also, the corrugated gas line connector has staggered spacing every 2 inches to eliminate noise..
  • BRASS GAS SHUT OFF VALVE - The shut off valve is a great feature that allows you to directly shut off the flow instead of operating on the appliances. It is convenience for servicing appliances or summer shutdown..
  • COMPATIBLE WITH MOST GAS APPLICANTS - Our universal gas dryer installation kit is suitable for gas log, gas stove, gas dryer, wall mounted heater, garage heater, fireplace, and so on. It can be used indoor or outdoor..
Check Stock

Grehitk Flexible Gas Line Connector for Dryer(3/4 24inch), Gas Hose Connector Kit for Stove, Water Heater, Gas Log, Pipe Diameter 1 in. OD(3/4 in. ID), Connector Size 3/4" FIP.3/4"MIP, Stainless Steel

  • ...4 Inch MIP(Tapped 3/8In FIP ), and 1set threaded tape..
  • HIGHLY DURABLE- High quality corrugated stainless steel gas hose with multiple types of threaded joints to create a safe metal connection.Designed for safe, optimal flow rate, the flow capacity is up to 150K BTU. This dryer gas line kit is 100% Leak Tested, CAS certified.
  • It has good air tightness, durability, rust and corrosion resistance..
  • COMPATIBLE WITH MOST GAS APPLICANTS - Our universal gas dryer installation kit is suitable for gas log, gas stove, gas dryer, wall mounted heater, garage heater, fireplace, and so on. It can be used indoor or outdoor..
  • EASY TO INSTALL- Only one wrench and a little bit teflon tape are all you need to install the hose. Trust me, no more than 2 minutes. Note: The one side of joint connected to the yellow corrugated pipe cannot be wrapped with raw tape! Otherwise it will cause air leakage!But the other side of the joint should be wrapped..
  • GUARANTEE AND SERVICE- Safe use is always the first goal of the product.Our products have gone through many quality checks and we never compromise on qualit....
Check Stock

EXCELFU Flexible Dryer Gas Hose Dryer Gas Appliance Line Connector with Fittings Compatible with 1/2' OD 1/2' MIP x 1/2' FIP Hose Connection, Stainless Steel(6 Feet)

  • Hose Fittings are compatible with 1/2" MIP and 1/2" FIP, it can create a secure metal connection for heavy-duty use.
  • Designed for gas dryer: This 72" Flexible Stainless Steel Gas Appliance Line is not universal, it is mainly designed for gas dryers and not for ovens or ranges.
  • Product Parameters: Inner dimensions of this line are 3/8", Outside dimensions of this line are 1/2".
  • Corrugated design: This gas line hose with corrugated design can achieve full flexibility, it snaked into small spaces including corners and bends easily.
  • Easy to install: No tools need to install the piping. It come with male and female iron pipes for easy connections. Make sure you are in need of 1/2 gas piping otherwise this will not fit.
Check Stock

Side Vent Kit 3911EZ9131X for LG Dryer, Venting Kit Assembly 383EEL9001B Compatible with Kenmore/sears, Replacement Part AP4438852 Exhaust Out Either Side or Bottom

  • ✔ [Compatible with Most Models] This dryer side vent kit number 3911EZ9131X (also called 383EEL9001B) compatible with 408 models of LG dryer, and 144 models of Ken-more / Sears dryer. Please refer to Figure 3 for specific models. For use with LG gas dryer model numbers beginning with the prefixes (CDE, CDG, DLA, DLE, DLEX, DLEY, DLG, DLGX, DLGY). For use with Ken-more / Sears gas dryer model numbers beginning with the prefixes (796.61, 796.69, 796.71, 796.79, 796.80, 796.81, 796.82, 796.88, 796.90, 796.91, 796.92, 796.98). There are so many matching models that you must make sure that your dryer model matches this one before purchasing. This is very important important important..
  • ✔ [Venting Kit Assembly Included] : 2 X Straight Tubes, 1 X 90 Degree Elbow, 1 X Cover Plate, 1X Mounting Screw, 1 X Instruction Sheet, 1 X Adhesive Aluminum Foil Tape. Solving the problem that gas dryers cannot be vented on the right left and bottom side. .
  • ✔ [Simple Install by Yourself] This dryer venting kit installation is so simple. You can replace it by yourself with simple tools and have a perfect solution in just 20 minutes. Restoring the normally use of your drye....
Check Stock

Beaquicy STV-90 Dryer Duct Connector - Snap to Vent 90 Elbow - Indoor Hook-up Dryer Vent Kit

  • ✅【PRODUCT DESCRIPTION】: The STV-90 dryer duct exhaust connector consists of a buckle to the exhaust 90 elbow, a buckle connector and a sealing ring connected to the wall conduit or dryer conduit. 90 degree diameter elbow dryer connectors are used to attach semi-rigid or flexible dryer hoses without hose clamps. Made of silicone and other sturdy materials to ensure that dryer hose vent fittings do not crack, tear or squeeze when using connectors..
  • ✅【AIRTIGHT】: STV-90 dryer conduit connector Universal dryer connector for electric and gas dryers. The silicon seal ring of STV-90 dryer pipe connector provides you with a sealed dryer connection. The silicone seal has a strong viscosity and is not easy to fall off, making your dryer more efficient while consuming less energy, allowing clothes to dry faster and saving electricity..
  • ✅【90 DAYS WARRANTY】:The STV-90 dryer duct exhaust connector supports 90 days return and exchange. Our company attaches great importanc e to the shopping experience of each customer. Risk-free shopping, if you have any quality problem during warranty period, please contact customer service in time. We will try our best to solve t....
Check Stock

New Lint Filter - Exact Replacement for LG Dryer DLEX3470W DLE3170W DLEX3470V DLE2601R

  • ★Parts Number:Includes MCK49049101 Dryer Lint Trap Filter Screen & ADQ56656401 Dryer Lint Filter（Stainless Steel).NOTE: When ordering parts, please verify your part number is correct for your model before ordering. Parts may look the same but the size and shape can have small variations..
  • ★Replacement Parts: ADQ56656401 Dryer Lint Filter Upgraded Stainless Steel Mesh Replaces 1464160,AP5071745,EAP3534930,PS3534930,AH3534930；MCK49049101 Lint Trap Cover Housing Replaces AP4457244, 1462822, AH3531962, EA3531962, PS3531962..
  • ★Compatible Models:ADQ56656401 Dryer Lint Filter Fits: DLE3170W, DLE3180W, DLE3300W, DLEX2801L, DLEX2801R, DLEX2801W, DLEX2901V, DLEX3001P,etc.MCK49049101 Dryer Lint Screen Cover Fits: DLEX3250W, DLEX2901V,DLEX3470V, DLEX4270V, DLEX3360R, DLEX3001W,DLEX3550V, DLEX4270W, DLEX3360V, DLGX2802L, DLEX3885C,etc..
  • ★Premium Quality: Lint screen ADQ56656401 and MCK49049101 Dryer Lint Filter Cover are recommended to be replaced at the same time to prevent items from getting stuck in the lint screen.It can capture the lint and debris in the exhaust gas flowing from the dryer, which helps to increase the air volume and improve the drying efficiency..
  • ★1 Year Warranty: If you are not satisfied with the product for any reason, you m....
Check Stock

Deflecto Dryer Lint Trap Kit, Indoor Venting with Supurr-Flex Flexible Metallic Duct, Includes Clamps (LTF)

  • Designed For Safe Indoor Dryer Venting Where Outside Venting Is Impossible.
  • Includes Lint Trap, Metallic Transition Duct And 2 Clamps.
  • Quick, Easy Installation, Fits Most Clothes Dryers.
  • Lint Trap Requires 4 Cups (32 Oz.) Of Water For Use.
  • In Small Rooms Open Doors For Adequate Distribution Of Heat And Moisture.
  • The Container Is Constructed Of Calcium Filled Polypropylene, With A Melting Point Of 325 Degrees F.
  • Flexible Dryer Vent Duct Has An Operating Temperature Of 265 Degrees F.
Check Stock

F271239 One-Stop Universal Gas-Appliance Hook-Up Kit for Replacement Mr.Heater fits Gas Stoves, Gas Dryer, Garage Heaters, Gas Fireplaces and Wall Mounted Heaters

  • 【Product Features】Replacement Mr.Heater F271239, 22" Universal Appliance Hook-Up Kit. The Brass Gas Shut-Off Valve Shuts Off Flow Directly for Easy Equipment Maintenance or Summer Shutdown..
  • 【Applicable Objects 】Ideal for Use with Gas Logs, Garage Heaters, Gas Stoves, and Wall Heaters. Compatible with: Heaters, Logs, Stoves, Dryers, etc..
  • 【Easy to install】This Gas Dryer Installation Kit is Very Easy to Install. All it Takes is a Wrench and a Bit Of Teflon Tape and You'll Be Set Up in Minutes..
  • 【Quality Assurance】The Gas Dryer Fitting Kit is Made of Highly Durable Steel and Is Designed For Safety and Optimal Flow. It is Gas-Tight, Durable, Rust-Resistant, and Corrosion-Resistant. The Flexible Gas Hose is Designed with Corrugation, Which is Highly Flexible and not Easily Damaged. and The Corrugated Gas Fittings are Staggered Every 2 Inches to Eliminate Noise..
  • 【Product Includes】You will Get a 6-Piece Universal Gas-Appliance Hook-Up Kit. Includes 22" Flexible Gas Line, On/Off Valve, and 3 Different Couplings..
Check Stock