Reviews Small Engine Nitrous Kit

Nitrous Express - SX2D Dual Stage Diesel Nitrous Kit w/Progressive Controller (NXD4000)

  • The Nitrous Express dual stage Diesel nitrous system isn’t just another plug-in chip that floods your engine with raw diesel and covers the car behind you in black smoke..
  • The Nitrous Express systems are engineered to be the safest way to boost horsepower on any diesel engine..
  • Nitrous Express Diesel systems actually cool the exhaust temperatures while boosting horsepower and torque! ..
  • The Maximizer nitrous controller allows you to apply nitrous flow through either boost pressure, RPM, Time, MPH (Miles Per Hour), or Throttle percentage progression..
  • Infinitely adjustable power levels make the Nitrous Express system the most advanced, safest diesel power booster on the planet..
Check Stock

S&S Cycle 550-0501 HI-4N Ignition Module

  • Fits almost all years Chinese made electric start upright engine 49cc 50cc 70cc 80cc 90cc 100cc 110cc 125cc engines. For ATV, Coolster, Quad Bike, Dirt Bike, Pit Bike, Go Kart, Kawasaki KLX, 4 Wheelers, Scooter, Buggy, Motowork, Dune, Taotao..
  • 12 Volt Coil+5 PIN CDI BOX+4 PIN Regulator+Solenoid Relay+Spark plug.Fits ATV / Quad / Kawasaki KLX / Coolster / Scooter / 4 wheelers / Buggy / Dirt Bike / Go Kart /Pit Bike/ Motowork more..
  • This kit include 2-pin Male Plug Relay,Ignition Coil 135 Degree Elbow,12v 4-pin Voltage Regulator,5-pin CDI. (Does Not fit for GY6 engine)..
  • The kit Compatible with many brands,such as: Atomik, Pitpro, Hummer, Orion, Xmoto, Lei, DMX, SWD, TDR, DDR, Tommahawk, Monsoon, Grudge, Kazuma, Bull, Trooper, Hunter, Motox, Trojan, Blitz, Crusade, Link, Bigfoot, Kuda, Motoworks, Nitrous, Reign, Fury, Prox, Raider, Zongshen, Loncin, Ducar, Lifan, Thumpster, Thumbstar, Chongqing..
  • The items are the same as the pictures.5 Pins CDI module + 2Wire Ignition Coil + Starter Relay Solenoid + 4 PIN Voltage Regulator Rectifier + Spark Plug. Fits for: 50cc 70cc 90cc 110cc 125cc 140cc horizontal engine,Bikes & Quads,ATV, Buggy's..
Check Stock

Nitrous Express - Dry EFI Single Nozzle Nitrous Kit (35-150HP) w/10lb Bottle (21000-10)

  • This system provides nitrous through a single Dry Nozzle..
  • This system does not add fuel and is intended to be used with an engine management system that can add nitrous enrichment fuel through the engines injectors..
  • Includes nitrous jets for 35-50-75-100-125 &150 HP..
  • This NX Dry nitrous system comes complete with a 1/8npt dry nozzle, a single .093 Lightning solenoid..
  • Systems with a bottle include the billet Lightning bottle valve, wide open throttle switch..
Check Stock

NOS 05029 Sneeky Pete Nitrous Kit

  • Will need to jet the carburetors a little richer to compensate for the nitrous.
  • Kit comes with compact 10-ounce bottle, nitrous solenoid, nylon nitrous line, wiring, 9-volt battery holder and an assortment of jets for easy installation.
  • Portable system installs in only minutes.
Check Stock

Nitrous Express - Mainline Carb Nitrous Kit w/10lb Bottle (ML1000)

  • If you are a serious nitrous junkie on a tight budget we have what you have been waiting for! NX introduces MainLine Nitrous Systems..
  • MainLine Systems benefit from the years of research and development that made Nitrous Express the leader in the nitrous world, but at a price even the most budget-restricted racer can afford..
  • Just the basics, no frills, just rock solid performance at rock bottom prices..
  • The ML1000 will outperform any other 250HP carbureted kit on the market, guaranteed to make 250HP..
  • Most of it s competitors promise 250HP but only produce 160WHP!..
Check Stock

Nitrous Express - Mainline 4500 Carb Nitrous Kit w/10lb Bottle (ML1001)

  • If you are a serious nitrous junkie on a tight budget we have what you have been waiting for! NX introduces MainLine Nitrous Systems..
  • MainLine Systems benefit from the years of research and development that made Nitrous Express the leader in the nitrous world, but at a price even the most budget-restricted racer can afford..
  • Just the basics, no frills, just rock solid performance at rock bottom prices..
  • The ML1001 will outperform any other 250HP carbureted kit on the market, guaranteed to make 250HP..
  • Most of it s competitors promise 250HP but only produce 160WHP!..
Check Stock

NOS 16028NOS Intimidator Illuminated LED Purge Kit w/ 5lb. Bottle

  • Blue LED lights up a 4ft. plume of released nitrous.
  • Complete kit so an existing nitrous kit is not required.
  • Different color LEDs are also seperately available for users who want a different look.
  • 5-light design outshines competitive products.
Check Stock

Wiring Harness, Main Electrical Wire Harness for Yamaha Banshee 350 YFZ350 1997-2001 (OEM# 3GG-82590-20-00)

  • ...Kart, Kawasaki KLX, 4 Wheelers, Scooter, Buggy, Motowork, Dune, Taotao..
  • Compatible with many brands,such as: Atomik, Pitpro, Hummer, Coolster, Orion, Xmoto, Lei, DMX, SWD, TDR, DDR, Tommahawk, Monsoon, Grudge, Kazuma, Bull, Trooper, Hunter, Motox, Trojan, Blitz, Kawasaki KLX,Crusade, Link, Bigfoot, Kuda, Motoworks, Nitrous, Reign, Fury, Prox, Raider, Zongshen, Loncin, Ducar, Lifan, Thumpster, Thumbstar, Chongqing..
  • This is a complete electric start engine wiring harness loom,include 1x ATV Wire harness,1x CDI(5Pin AC),1x Solenoid Relay,1xRectifier (Voltage Regulator) ,1x Ignition Switch (2 keys, waterproof),1x Upgraded Multi-functional ATV Switch,1x Stator (Magneto Generator),1x Ignition Coil with lead and 1x Spark plug..
  • Note: 1)Please check the pictures carefully before buying, especially the pictures of Magneto Stator. 2) Please check the wiring diagram first before installation, and please consult or hire a mechanic to install this wiring harness if you are not sure about the wirings. False assembly may cause fire on the harness, though this occasion happens rarely..
  • Complete wiring harness,Complete wire harness,Complete wiring harness for chinese atv,taotao atv 110cc parts,scooter wire harness,complete electrics wiring harness,50cc scooter wiring h....
Check Stock

Motorized Bicycle Gas Bike Motor Engine 50 80 cc NOS Nitrous & Boost Bottle Kit

  • Nitrous Oxide (NOS) is the simplest, least expensive way, to provide a significant horsepower boost to your engine, and add performance you can feel in the seat..
  • More Peak Horsepower - Designed to gain 20% in Horsepower at Wide Open Throttle.
  • More Low End Torque - Torque gains are even greater as there is an increased combustion at a lower rpm range and causes the significant improvement in acceleration..
  • Low Cost, High Performance - Nitrous offers you more performance per dollar spent, than any other performance modification..
  • Easy Installation - 6 Sigma N20 installations are very easy, literally only taking a few minutes with basic hand tools to install. No wiring needed..
Check Stock

GY6 Bike Scooter ATV 50 100 125 150 cc NOS Nitrous Oxide & Boost Bottle Kit

  • Nitrous Oxide (NOS) is the simplest, least expensive way, to provide a significant horsepower boost to your engine, and add performance you can feel in the seat..
  • More Peak Horsepower - Designed to gain 20% in Horsepower at Wide Open Throttle.
  • More Low End Torque - Torque gains are even greater as there is an increased combustion at a lower rpm range and causes the significant improvement in acceleration..
  • Low Cost, High Performance - Nitrous offers you more performance per dollar spent, than any other performance modification..
  • Easy Installation - 6 Sigma N20 installations are very easy, literally only taking a few minutes with basic hand tools to install. No wiring needed..
Check Stock

Brian Tooley LS1 Rocker Arm Trunion & Bolt Kit 4.8 5.3 5.7 6.0 6.2 Trunnion BTR

  • Brian Tooley LS Rocker Arm Upgrade Trunion Kit Includes Allen Head Bolts.
  • These LS Series retrofit trunion kits are designed to convert stock LS Series rocker arms into captured roller bearing rocker arms. The factory bearings are a known failure on the LS Engines. When they fail they send small bearings through the entire engine. The upgraded trunions use a captured roller bearing allowing for a reliable smooth rotation..
  • The upgraded trunions also give more stability at higher RPM. We use these trunion kits in anything from stock 4.8's all they way up to 1,000+hp turbo motors.The stock factory LS rocker arms are very strong and very light. Once you upgrade the bearings and trunions the rocker arms handle similar to very expensive roller rocker arms (at a fraction of the cost)..
  • These are a must have for anyone installing a aftermarket Cam, Supercharger, Turbo or Nitrous..
  • Used on all LS style rocker arms including the following: LS1 LS2 LS3 LS6 L99, LS4, LS9 LSA LQ4 LQ9 L76 L92 LR4 LM7 L59 LM4 L33 L98 L77 LY6 LFA LZ1 LY2 L20 LMF LH6 LY5 LMG LC9 LH8 LS4 4.8 5.3 5.7 6.0 6.2.
Check Stock

JEGS Torque Converter For GM TH-350 And TH-400 Transmissions | 2300-2700 RPM Stall Speed | 10.75” Flexplate Bolt Pattern | 500 Horsepower Maximum Applications

  • PERFORMANCE FOR STREET AND TRACK USE for improved launch and acceleration.
  • MADE IN THE USA using high quality materials and assembly.
  • 2300-2700 RPM STALL SPEED to match your engine and camshaft needs.
  • IDEAL for small block applications up to 500 horsepower without nitrous or super/turbochargers.
  • ECONOMICALLY PRICED for performance on a budget.
Check Stock

Brian Tooley LS1 Rocker Arm Trunion Kit 4.8 5.3 5.7 6.0 6.2 Trunnion – No bolts

  • Brian Tooley LS Rocker Arm Upgrade Trunion Kit Doesn’t include upgraded bolts – stock bolts can be used..
  • These LS Series retrofit trunion kits are designed to convert stock LS Series rocker arms into captured roller bearing rocker arms. The factory bearings are a known failure on the LS Engines. When they fail they send small bearings through the entire engine. The upgraded trunions use a captured roller bearing allowing for a reliable smooth rotation..
  • The upgraded trunions also give more stability at higher RPM. We use these trunion kits in anything from stock 4.8’s all they way up to 1,000+hp turbo motors.The stock factory LS rocker arms are very strong and very light. Once you upgrade the bearings and trunions the rocker arms handle similar to very expensive roller rocker arms (at a fraction of the cost)..
  • These are a must have for anyone installing a aftermarket Cam, Supercharger, Turbo or Nitrous..
  • Used on all LS style rocker arms including the following: LS1 LS2 LS3 LS6 L99, LS4, LS9 LSA LQ4 LQ9 L76 L92 LR4 LM7 L59 LM4 L33 L98 L77 LY6 LFA LZ1 LY2 L20 LMF LH6 LY5 LMG LC9 LH8 LS4 4.8 5.3 5.7 6.0 6.2.
Check Stock