Reviews Small Crosscut Sled

Table Saw Small Parts Crosscut Sled - Table Saw Sled Kit Includes Blade Guard Miter Track Stop – 900 Angle Small Moldings Crosscut Saw - Table Saw Sled Features Zero-Clearance Support

  • Crosscut Sled For Table Saw: This miniature cross cut sled lets you use your table saw to cut small parts to length. Our sled includes a miter track....
  • Great for cutting: Our crosscut sled is great for cutting dowels, tenon stock, and small moldings at a precise 90° angle, with little to no tear-out..
  • Zero-Clearance Support: This sled system features zero-clearance support, which reduces the chance of small pieces getting stuck between the blade and....
  • Extremely Durable: Our aluminum table saw sled is ideal for constant repetitive use. This zero clearance table saw insert does not absorb moisture and....
  • Fits Most Table Saws: A small plastic ramp on one side of the kerf carries the drop-off piece away from the blade. The rear-mounted blade guard is....
Check Stock

TonGass DIY Crosscut Sled Kit for Table Saw - 2*UHMW Runner Bars 2* Aluminum Tracks 1* Knob & Bolt Set 8* Flat Heat Screws

  • Safety is our priority - This DIY table saw crosscut sled hardware kit will make crosscutting safer and more convenient. Avoid risking your limb when....
  • 13 PIECES CROSSCUT SLED HARDWARE - includes 2 pieces of 19” x 3/4” x 3/8” UHMW runner bars, 2 pieces of 12 inches aluminum mini tracks, 1 set....
  • PRE-CUT AND COMPLETE SET FOR YOUR CONVENIENCE - All the components of this kit are cut and designed specifically for the building of a crosscut sled.....
  • Please take note: The UHMW runners included in this kit will only fit standard 3/4-inch and 3/8-inch track slots and will not fit the Ryobi table saw....
  • FREE HOW TO BUILD A CROSSCUT SLED GUIDE BOOKLET - Follow to a tee or use as a guide, our easy-to-understand guide is perfect for all skill levels.....
Check Stock

DIY Crosscut Table Saw Sled Kit with a Specific Guide Booklet to Build Your Own Tablesaw for More Accurate and Safer Saw Working, Table Saw Accessories, Pack of 1

  • ... table saw sled for your need, but also lies in the sense of accomplishment and creativity it brings, being more motivated and confident in the following saw working when you use it..
  • Vary Size – You may build your own unique sled to fit your table saw.
  • Make your desired crosscut sled size and meet your unique cutting requirements..
  • Table Saw Accessories - 3/4'' x 3/8'' UHMW bar is the often used material in crosscut sled runners which fits most table saw and will not expand under sudden temperature changes as well as slick enough to slide smoothly.
  • The aluminum t track is solid extruded and can be trimmed to match your sled.
  • (ATTENTION: The bars DO NOT fit RYOBI table saw track slots).
  • Package Included – Crosscut table saw sled accessories (2 UHMW bars (3/4'' by 3/8'' ), 2 T tracks, 1 star knob and bolt, wood screws of varying lengths) and 1 specific guide booklet (glue and other building materials are not included).
  • Backs its products within 90 days warranty.
  • Please feel free to contact us with any questions you may have..
Check Stock

DIY Crosscut Table Saw Sled Kit with Specific Guide Booklet to build your own crosscut sled for More Accurate and Safer in Saw Working, pack of 1

  • （Attention: The UHMW bars are not in 3/4″ by 3/8″ size）DIY your own crosscut sled – You may build your own unique sled to fit your table saw.
  • Make your desired crosscut sled size and meet your unique cutting requirements..
  • Accurate & Safe – Great improve cutting accuracy and make saw operations safer, and steady the work piece while shielding your finger from harm..
  • Quality Kit – UHMW bar is the most often used material in crosscut sled runners and it does not flex under sudden temperature changes and slides more smoothly as there is less friction.
  • The aluminum T track is solid extruded and can be trimmed to match your sled. (ATTENTION: The bars Do Not fit RYOBI table saw track slots).
  • Fun of DIY – Not only can you create your own unique table saw sled but also you can enjoy the processing of DIY, more motivated and confident in the following saw working..
  • Package Included – 2 UHMW bars, 2 T tracks, 1 star knob and bolt, wood secrets of varying lengths, and 1 specific guide booklet (glue and other building materials are not included).
  • Backs its products within 90 days warranty.
  • Please feel free to contact us with any questions you may have..
Check Stock

Edsrdux DIY Table Saw Crosscut Sled Kit, Smooth No Residue, for Crosscut sleds Jigs, Fixtures or Miter Slots (Size 3/4″ x 3/8″).

  • Kit contains: Our crosscut sled kits come in red- 3/4″x3/8″x36″ 2 pcs.
  • white- 3/4″x3/8″x19″ plus 1 foot primary color T-track, 2 pcs.
  • white- 3/4″x3/8″x48″ 2 pcs. Make your crosscut sled any size for your table saw and cutting requirements..
  • High Quality Material: UHMW is a linear polyethylene with a molecular weight of 3,000,000 to 6,000,000. Thus, it is ten times heavier than regular high density polyethylene, and extremely durable for extensive use..
  • Smooth & No Residue: UHMW bars produce less friction than wood, perfect for runners for crosscut sleds. Furthermore, UHMW doesn’t expand or contract like wood during extreme weather changes. Each bar measures 3/4″ x 3/8″, fitting most standard table saw slots. Unlike wooden bars, UHMW bars are slick, leaving no residue, dust, or shavings behind..
  • Outstanding Impact Strength: With outstanding impact strength even at low temperatures, our crosscut sled kits are ideal for jigs, fixtures, or 3/4″ x 3/8″ miter grooves on table saws, bandsaws, or router tables..
  • Please note: UHMW poles tend to bend during shipping but are easily adjusted..
Check Stock

The Original Dubby Cut-Off • Cross Cut Sled for Cutting Precise Accurate Miters with a Table Saw Right Side Dubby Sled

  • THE ORIGINAL DUBBY SLED From standard 4 sided panel cutting to the absolutely stunning heptagon frame you will be completely accurate with the angles....
  • WORKING WITH LARGE PANELS The Dubby has the capacity to crosscut panels up to 24″ wide x 52″ long, and allows you to do them safely. Since the....
  • WORKING WITH ANGLES The Dubby angle scale is the simplest, most accurate and easiest to read scale available. Being about 15-20 times more accurate....
  • WORKING WITH SMALL PIECES- No miter gauge on the market can offer you the margin of safety provided by the Dubby Sled. The versatile hold-down clamp....
  • WILL THE DUBBY FIT YOUR SAW? The Dubby sled is compatible with most cabinet and contractor table saws. However, your table saw should fall within the....
Check Stock

Edsrdux DIY Table Saw Crosscut Sled Kit, Smooth No Residue, for Crosscut sleds Jigs, Fixtures or Miter Slots (Size 3/4" x 3/8").

  • Kit Contains: Our crosscut sled kits come in Red-3/4"x3/8"x36" 2pcs. white-3/4"x3/8"x19"+1feet T-track primary color, 2pcs. white-3/4"x3/8"x24"2pcs. white-3/4"x3/8"x36"2pcs. white-3/4"x3/8"x48" 2pcs. Make your crosscut sled to the size you want or need for your table saw and cutting requirements..
  • High Quality Material: UHMW Polymer (plastic) is a linear polyethylene material with a molecular weight ranging from 3,000,000 to 6,000,000. Furthermore, because UHMW is ten times heavier than regular high density polyethylene, it is extremely durable for constant repetitive use..
  • Smooth&No Residue: Because UHMW bars produce less friction than wood, they are commonly used as runners for crosscut sleds. Another benefit is that UHMW does not expand or contract like wood during extreme weather changes. Each bar measures about 3/4" x 3/8" and fits most standard table saw slots. UHMW bars are also slick and will not leave any residue, dust, or shavings behind, as do wooden bars..
  • Outstanding Impact Strength: Even at low temperatures, jigs, fix....
Check Stock

The Original Dubby Cut-Off • Cross Cut Sled for Cutting Precise Accurate Miters with a Table Saw (Left Side Dubby Sled)

  • ...bby will allow you to make perfect cuts the first time you do them and keep your creative juices flowing with idea after idea. It is ideal for making frames but it also works very well for the cutting of tiny pieces while keeping your fingers out of harms way..
  • WORKING WITH LARGE PANELS The Dubby has the capacity to crosscut panels up to 24″ wide x 52″ long, and allows you to do them safely. Since the panels don’t make contact with the table saw top, “walking” of the material is virtually eliminated. This will allow you to cut perfectly square panels for your furniture and cabinet making projects quickly, easily and accurately..
  • WORKING WITH ANGLES The Dubby angle scale is the simplest, most accurate and easiest to read scale available. Being about 15-20 times more accurate than the average miter gauge, the scale has pre-determined lines for any shape (from 4 to 16 sides) you want to cut. This means no calculations, no hassles, and best of all, no test cuts for perfect results.
  • WORKING WITH SMALL PIECES- No miter gauge on the market can offer you the margin of safety provided by the Dubby Sled. The versatile hold-down clamp included with every Dubby will give you an extremely safe way to cut small pieces, and will easily pivot out of the way w....
Check Stock

The Original Dubby Cut-Off • Cross Cut Sled for Cutting Precise Accurate Miters with a Table Saw (Left Side Dubby and Right Side Dubby Sleds are Included)

  • ...bby will allow you to make perfect cuts the first time you do them and keep your creative juices flowing with idea after idea. It is ideal for making frames but it also works very well for the cutting of tiny pieces while keeping your fingers out of harms way..
  • WORKING WITH LARGE PANELS The Dubby has the capacity to crosscut panels up to 24″ wide x 52″ long, and allows you to do them safely. Since the panels don’t make contact with the table saw top, “walking” of the material is virtually eliminated. This will allow you to cut perfectly square panels for your furniture and cabinet making projects quickly, easily and accurately..
  • WORKING WITH ANGLES The Dubby angle scale is the simplest, most accurate and easiest to read scale available. Being about 15-20 times more accurate than the average miter gauge, the scale has pre-determined lines for any shape (from 4 to 16 sides) you want to cut. This means no calculations, no hassles, and best of all, no test cuts for perfect results.
  • WORKING WITH SMALL PIECES- No miter gauge on the market can offer you the margin of safety provided by the Dubby Sled. The versatile hold-down clamp included with every Dubby will give you an extremely safe way to cut small pieces, and will easily pivot out of the way w....
Check Stock

18” Precision Steel Miter Bar Rail Runner with Adjustable Spring Loaded Plungers For DIY Table Saw Crosscut Sleds, Jigs and Fixtures to Slide in 3/4 inch by 3/8 inch Miter Slots

  • ...). There are also three counter sunk holes on the bar to mount the bar using #8 wood screws (not included)..
  • Once you mount the bars to your sled, jig or fixture you are sure to feel the difference. This is especially true when you first run the bars through your miter slots. The smooth sliding action is perfect for crosscut sleds, miter angle jigs, shop made coping sleds and a whole lot more! Using two bars (only one is included) for even more stability works exceptionally well..
  • The bar is approximately 18 inches long and will fit into miter t slots and u-shaped miter slots. Non-standard slots found on some job site style table saws and other small machinery will not accept this bar due to the non-standard slot dimensions. We recommend that you measure your miter slot before placing your order..
Check Stock

POWERTEC 71403 Table Saw Crosscut Sled Woodworking Jig and Hardware Kit for Precise Cuts

  • INCLUDES: Crosscut Table Saw Sled kit comes with table base, MDF fence face, fence, flip stop, hold down clamp, miter bar and installation hardware to....
  • FEATURES: Easy to read 1/2° graduations, a hairline indicator for mistake free tablesaw setups, right edge zero clearance, and simplistic design for....
  • HIGH PRECISION CUTS: Complete with an integrated angled ruler to ensure you get the desired cut with accurate measurements.
  • ULTIMATE WOODWORKING JIG: Produces quicker, safer cuts for edge and detailing work projects requiring degree accuracy - Supports the material and....
  • PREMIUM DESIGN: Provides a large smooth sliding worksurface with an easy to read, accurate scale that produces high precision miters and repeatable....
Check Stock

Flexible Flyer 3-Pack Snow Saucer Sleds. Round SNO Slider Discs, Blue, Orange, Green

  • 3 Snow Saucers — Flexible Flyer 3-pack of plastic sledding saucers. Includes 1 orange sled, lime green sled and 1 blue sled.
  • “No-Break” Resin — New, stronger resin plastic with a super-slick hard plastic sled bottom.
  • Easy To Carry — Light enough for small kids to carry uphill. Each sled weighs just 2 pounds. But sturdy enough for adults. A snow sled for kids and adults ages 4 and up.
  • Fast — Super-slick heavy-gauge snow slide flies down hills. Includes molded-in handgrips for holding tight.
  • Compact — Stack multiple round saucer sleds together to fit in small car trunk. Sleds are 26 inches in diameter and 3 inches in height.
Check Stock

Paricon 54-Inch Flexible Flyer Sled

  • Classic Sled - This original Flexible Flyer steel runner sled. Sled’s 48-inch size is small enough for kids to pull up the hill, but large enough for most adults to enjoy winter sledding.
  • Steering - Carve turns with maximum control. Steer lying down with your hands, or in a seated position with your feet, or with a rope (not included) attached to the steering bar.
  • Durable – Made of smooth birch wood with powder-coated steel runners, this wooden & metal Sled features double knee construction.
  • Fast - Once the snow is packed with a few tracks, this is the fastest, most maneuverable sled on the hill. Super-slick red steel sled runners fly down hills.
  • Kids & Adults - A steering sled for kids ages 5 and up (and most adults). holds 250 lbs. Measures 54 x 20.5 x 6.5 Inches. Weighs 13 lbs. This vintage sled comes fully assembled.
Check Stock