Reviews Small Camera Screws

SMALLRIG Universal Basic Camera Shoulder Mount Kit for DSLR, Mirrorless, and Small Camera Shoulder Rig - 2896

  • 【UNIVERSAL SHOULDER KIT】SmallRig basic shoulder kit 2896 is designed to provide a comfortable solution for shoulder shooting. Set up your rig for shoulder-mounted handheld shots, this shoulder mount is also designed to stabilize your camera, provide comfort for long shooting days, and minimize rotation when shooting video with your DSLR, mirrorless, or small camera..
  • 【BASEPLATE WITH 15MM RODS & ROD CLAMP】It comes with a universal baseplate 1674 which makes the kit work with different types of cameras. The baseplate mounts your camera using its 1/4"-20 mounting screws and features a 15mm rod clamp, both helping support your small camera..
  • 【DUAL RUBBER HANDGRIP KIT】The dual handgrip kit assists with balance and comfort using its two 360° rotatable handgrips that mount onto the rods with a 15mm rod clamp. The 15mm LWS universal rod system allows you to customize your rig with accessories such as lights, monitors, microphones, wireless gear, or a follow focus..
  • 【SHOULDER PAD WITH 15MM ROD CLAMP】The ergonomic shoulder pad is made of a highly-elastic shoulder curve shape sponge to offer a superiorly comfortable shoulder experience during shooting. The rod clamp can be tightened via one thread for easy and quick operation. Featuring multiple 1....
Check Stock

SMALLRIG Universal Basic Camera Shoulder Mount Kit for DSLR, Mirrorless, and Small Camera Shoulder Rig - 2896

  • 【UNIVERSAL SHOULDER KIT】SmallRig basic shoulder kit 2896 is designed to provide a comfortable solution for shoulder shooting. Set up your rig for shoulder-mounted handheld shots, this shoulder mount is also designed to stabilize your camera, provide comfort for long shooting days, and minimize rotation when shooting video with your DSLR, mirrorless, or small camera..
  • 【BASEPLATE WITH 15MM RODS & ROD CLAMP】It comes with a universal baseplate 1674 which makes the kit work with different types of cameras. The baseplate mounts your camera using its 1/4"-20 mounting screws and features a 15mm rod clamp, both helping support your small camera..
  • 【DUAL RUBBER HANDGRIP KIT】The dual handgrip kit assists with balance and comfort using its two 360° rotatable handgrips that mount onto the rods with a 15mm rod clamp. The 15mm LWS universal rod system allows you to customize your rig with accessories such as lights, monitors, microphones, wireless gear, or a follow focus..
  • 【SHOULDER PAD WITH 15MM ROD CLAMP】The ergonomic shoulder pad is made of a highly-elastic shoulder curve shape sponge to offer a superiorly comfortable shoulder experience during shooting. The rod clamp can be tightened via one thread for easy and quick operation. Featuring multiple 1....
Check Stock

SmallRig Camera Screw Set,26 Pcs Screw Set for Camera Accessories AAK2326

  • 【FOR CAMERA ACCESSORIES】SMALLRIG Screw Set for Camera Accessories AAK2326 is designed for camera cages, handles, plates and other camera related....
  • 【26 SCREWS IN TOTAL】The box includes six types of screw, 26 screws in total.
  • 【SOCKET CAP & SLOTTED & PHILLIPS SCREW】26 screws in total: 2 x 1/4” slotted screw, 8 x 1/4” socket cap screw, 2 x 3/8” slotted screw, 4 x M2....
  • 【SIX TYPES OF SCREWS】The box includes six types of screw: 1/4”, 3/8”, M2, M2.5, M3, M4 Screws.
  • 【EXAMPLES OF USE】The m2.5 screw can be used for selected camera cage which locked with m2.5 screw on the side. The m3 and m4 screw can be used for....
Check Stock

BABYL Universal Car Rear View Camera License Plate Kit Accessories, Only Holder for Backup Camera Reverse Camera

  • This is a universal rear camera , you just need to make the distance between the two screw holes of your rear camera is 13mm, then buy it with ..
  • The distance between the two screw holes of this back up camera is 13mm, please confirm the distance between the two screw holes of your reversing camera is 13mm as ..
  • This rear view camera generally fit the rear cameras included in dash cam kit. Replace the small mount with license plate mount, easier to install..
  • This mount is rear view camera accessory, this backup camera license plate mount includes license plate , rearview camera holder and installing screws..
  • This rear view camera can be only applied to car license plates. Please note do not install your backup camera upside , you should test installing..
Check Stock

1000Pcs Eyeglass Repair Kit, Tiny Watch Screws Nut Assortment with Mini Screwdriver

  • Multi-Use: can be used for repairing eyeglass, sunglass and watch, also can be used for repairing clock, toy, fan, camera, computer and so on.
  • Various Sizes: Comes with different lengths and sizes screws, can fit most common glasses including sunglasses, rimless glasses, semi-rimless glasses and frame glasses.
  • High Quality: Made of stainless steel material, rust resistance and oxidation resistance, durable to use.
  • Warning: This product contains many small parts, please keep away from babies and small children..
  • Package Include: 1000Pcs screws with a multi-functional mini screwdriver.
Check Stock

Fake Camera, FITNATE Dummy Camera CCTV Surveillance System with LED Red Flashing Light with 4 Safety Warning Stickers, Fake Security Camera for Outdoor & Indoor Use (4 Packs, Silver)

  • EMULATIONAL DESIGN: The fake camera is simulated everything that is based on the real camera, including facade patterns, working mode and operating principle and thus, making this fake security camera looks for real. With fake camera lens, fake infrared LED flashing light and an artificial transmission line inserted into small round hole of the bracket, it will keep thieves away..
  • FLEXIBLE & ADJUSTABLE ANGLE: The bracket of the dummy camera is used to be adjusted in an easy way. The revolving angle can be rotated between 0 degree and 360 degrees from side to side and it can be tilted up and tilted down from 0 degree to 90 degrees. Besides, there is a control valve to make it easier for you to adjust the tightness..
  • WATERPROOF CASE & EASY INSTALLATION: The case of the fake security camera is designed to be waterproof so that it can still work normally on rainy days. After putting 3 set of AA batteries inside the battery compartment, the LED flashing light will start to blink and it will flicker at 1-2 seconds intervals. With 12 screws, it is easy to install on corner of the wall or on the ceiling..
  • REDUCTION OF COST: Compared with the price of real camera on the market, this dummy camera will cost you less money and meanwhile, it will still produce the s....
Check Stock

Universal Car Rear View Camera License Plate Bracket,Dash Cam Mirror Camera Kit Accessories Rearview Camera Mount, Only Installation Holder for Backup Camera Reverse Camera

  • ▶This rear view camera bracket generally fit the rear cameras included in dash cam kit. Replace the small mount with license plate mount, easier to install..
  • ▶The distance between the two screw holes of this back up camera bracket is 13mm, please confirm the distance between the two screw holes of your reversing camera is 13mm as well..
  • ▶This bracket mount is rear view camera accessory, this backup camera license plate mount includes license plate bracket, rearview camera holder and installing screws..
  • ▶This is a universal rear camera bracket, you just need to make sure that the distance between the two screw holes of your rear camera is 13mm, then buy it with confidence..
  • ▶This rear view camera bracket can be only applied to US car license plates. Please note that do not install your backup camera upside down, you should test picture before installing..
Check Stock

HOLACA Quick Indoor Wall Mount Bracket for Wyze Cam Camera Wyze Cam V2 and iSmart Alarm Spot Camera (3 Pack, White)

  • Mounting Kit for Wyze Cam Pan/v2 Camera: Includes 1* security camera wall mount + 1* 26ft power cord + 4* screws + 4* wall plugs + 30* wire clips cable nails.(NOTE: Not include Security Camera)..
  • Durable & Waterproof Wall Mount: Made of pure high quality ABS plastic and aluminum material, it's sturdy and durable enough to provide protection for Wyze Cam camera from all kinds of potential damage and ensure the ruggedness and consistence even after long-time exposure to atrocious weather..
  • Multi Angle: Easily adjustable with 360 degree swivel & 90 degree tilt. (Kindly Reminder: Please adjust your angle before you mount so you know where to mark the installation screws.).
  • Long Power Cable: The charging cord is perfect to fit your indoor or outdoor wireless security camera and it is long enough to connect your cam located outside the room. This power extension charging cable is table data transmission and fast charging, working better for sucrity camera and other micro USB charging port devices..
  • Easy to Install: The security camera mount bracket comes with screws and wall plugs that you need to get it installed on the wall. You can mount the security camera in anywhere you want, please adjust your angle before you mount so you know where to m....
Check Stock

SmallRig Camera Screw 26 Pcs Tripod Screw Camera Mount Screw Adapter Converter Ring Screw Pack Camera Clamp Mount - AAK2326

  • 【FOR CAMERA and SMARTPHONE ACCESSORIES】SmallRig Screw Set for Camera and Smartphone accessories AAK2326 is designed for phone cages, camera cages,....
  • 【MULTI FUNCTION】 - Muscccm tripod screw adapter kit can be attached to a wide range of different photography, the converter screws meet the most....
  • 【SIX TYPES OF SCREWS】The box includes six types of screw: 1/4”, 3/8”, M2, M2.5, M3, M4 Screws.
  • 【DURABLE MATERIAL 】- The camera mounting screw adapter made of aluminium alloy, others adapters are made of stainless steel, solid and durable,....
  • 【WAHT YOU WILL GET】26 screws in total: 2 x 1/4” slotted screw, 8 x 1/4” socket cap screw, 2 x 3/8” slotted screw, 4 x M2 phillips screw, 2 x....
Check Stock

Haktoys Wide-Angle Camera for HAK907 & HAK909 with 1 GB Micro SD Card & Card Reader

  • Includes 1 x Camera that is attachable to the helicopter, 1 x 1 GB Micro SD Card, 1 x Micro SD Card Reader, 4 x Screws.
  • Camera is attachable to the quad copter. Camera angle can be moved..
  • Instructions: 1- Insert the micro SD car into the card slot on the camera..
  • 2- Attach the camera to the camera mount under your quad copter using the screws..
  • 3- Insert the camera plug to the camera socket. The socket is usually located on the circuit board for camera-ready products..
Check Stock

26FT Power Extension Charging Cable with Wall Mount for Wyze Cam Pan/ Wyze Cam Pan v2,Mounting Kit Including Charging and Data Sync Cord,Adjustable 360 Degree Swivel Ceiling Mount and 30 Wire Clips

  • Professional Designed: Compatible with Wyze Cam Pan V2/Wyze Cam Pan Security Camera ONLY. Package include Camera Wall Mount + 26 FT Charging Cable + 30 Wire Clips + 4 Screws + 4 Wall Plugs..
  • Charging Cable: USB to micro USB 26FT Extension power cable keeps your indoor or outdoor Wireless Security Camera connected over a much greater distance. Works as power and data cable, fast Charge-A maximum charging speed up to 2A. Stable data transmission and fast charging..
  • Wall Mount: Made of high quality ABS plastic and aluminum material, it can protect the security camera work stably. Provide 360° rotating angle and 90° tilt ensure your camera monitor in an all-round way without blind spot left and can adjust it whatever angle you like..
  • Easy to Install: Comes with screws and wall plugs, easy for you to mount the camera and the cable. Please adjust your angle before you mount so you know where to mark the installation screws. These tools make the walls look cleaner..
  • Kindly Reminder: Easily adjustable with 360 degree swivel and 90 degree tilt. Please adjust your angle before you mount so you know where to mark the installation screws.After install screws but you want to adjust the angle of camera. 1:Loosen the white lines area. 2:Adjust the ball head....
Check Stock

SIRUI HA-77 Telescopic Boom Extension Arm (Aluminum, max. Length 77 cm / 30.3 in, max. Loading 5 kg / 11 lb) Black

  • SIRUI HA-77 Telescopic Horizontal Extension Arm: Compact Boom Arm with telescopic function - extendable from 50.5 to 77 cm / 19.7 - 30.3 inches - For tripods with 3/8" connection - For heads, cameras, etc. with 1/4" or 3/8" screw (adapter included).
  • Multifunctional Boom: Designed for e.g. top-down, food, macro-photography or even reprography - Ideal for serving as a small video camera crane jib arm - Even for attaching a second camera, a monitor or accessories.
  • All around Safe Use: Reversible 1/4" and 3/8" screw from tripod heads or cameras - Two locking screws for tripod heads - Second optional release plate can be fitted - Soft foam rubber grip can be attached to either end - Load hook for counterbalance - Linear and angular scale allows settings to be recreated - Wing screws to ensure secure set-up.
  • Dimensions (L x H): 54-81.5 x 20 cm - Pack size: 38.5 x 13 cm / 15.2 x 5.1 inches - Weight: 1.19 kg / 2.6 lb - Max. Loading Capacity: 5 kg / 11 lb - Overhang: up to 600 mm - Ø Tubes: 24 - 28 mm - Ø Base: 48 mm - Material: aluminium - Tilts from +90° to -90° 360° - Panorama function 30.5 cm horizontal movement - Camera plate diameter: 52 mm - Compact size: 38.5 x 13 cm.
  • Package includes: 1x SIRUI HA-77 Telescopic Boom Extension Arm.
Check Stock

Wyze Cam Pan Mounting Kit, 15 Foot Micro USB Cable Included

  • COMPATIBILITY: Wall Mount for Wyze Cam V3 & Wyze Cam V2 & Wyze Cam Spotlight, provides better viewing angle for Wyze Cam camera. Note: Wyze Camera is not included, bracket not included..
  • TWO INSTALLATION METHODS: The Wyze wall holder can be installed with 3M stick on or wall screws. It is very easy to install with 3M tape strong adhesive, no tools needed, no messy, no drilling. Another installation methods-wall screws holder are installed more firmly and the wall can be used wider range..
  • PLUG-IN DESIGN: The wall holder adopts a plug-in design, which is easier to install and not damage the camera. The Wyze camera only needs to be inserted into the bracket, no screws, no mess install, and will not affect the 360 -degree rotation of the camera..
  • SPECIAL DESIGN: The Wyze Cam V3 mount is designed with a slider auxiliary board. When the auxiliary board is removed, it is the Wyze Cam V2 bracket, providing a suitable choice for your Wyze Cam Camera..
  • Wide Applicability: The Wyze Camera bracket can be installed on glass, wall, cabinet, ceiling and any other place, including paint, outdoor, etc. Note: 3M tape cannot be installed on dirty, uneven and flat surfaces with water..
Check Stock