Reviews Slotted Square Neck Bolt

Park Tool CNW-2 Chainring Nut Wrench

  • The CNW-2 makes chainring bolt set installation and removal easy..
  • It securely holds the slotted nut to prevent spinning when tightening or loosening the bolt..
  • Double-ended to fit most slotted-type nuts, including the Campagnolo chainring nuts..
Check Stock

GreatNeck #2 x 1/4 Inch Offset Screwdriver

  • Multi-bit screwdriver / nut driver shaft holds 8 popular tips and converts to 3 nut driver sizes.
  • Includes industrial strength heat treated bits: 3/8-Inch, 5/16-Inch and 1/4-Inch nut drivers, #1 and #2 Phillips, 1/4-Inch and 3/16-Inch slotted, T10 and T15 TORX, and #1 and #2 square recess.
  • Interchangeable blade for fast and easy switch out.
  • Blast finish bit tips provide a firm hold and reduce cam-out.
  • The following replacement bits are available: see Cat. No. 32482 (#1 Phillips and 3/16-Inch Slotted), Cat. No. 32483 (#2 Phillips and 1/4-Inch Slotted), Cat. No. 32484 (#1 Square and #2 Square), and Cat. No. 32485 (T10 TORX and T15 TORX).
  • TORX is a registered trademark of Acument Intellectual Properties, LLC.
  • Assembled in USA of US and imported components.
Check Stock

Wiha 32097 | 7 Piece Insulated SoftFinish Screwdriver Set

  • Multi-bit screwdriver / nut driver shaft holds 8 popular tips and converts to 3 nut driver sizes.
  • Includes industrial strength heat treated bits: 3/8-Inch, 5/16-Inch and 1/4-Inch nut drivers, #1 and #2 Phillips, 1/4-Inch and 3/16-Inch slotted, T10 and T15 TORX, and #1 and #2 square recess.
  • Interchangeable blade for fast and easy switch out.
  • Blast finish bit tips provide a firm hold and reduce cam-out.
  • The following replacement bits are available: see Cat. No. 32482 (#1 Phillips and 3/16-Inch Slotted), Cat. No. 32483 (#2 Phillips and 1/4-Inch Slotted), Cat. No. 32484 (#1 Square and #2 Square), and Cat. No. 32485 (T10 TORX and T15 TORX).
  • TORX is a registered trademark of Acument Intellectual Properties, LLC.
  • Assembled in USA of US and imported components.
Check Stock

Glvaner (8 Sets) 5/16-18 x 2-1/2' Stainless Steel Carriage Bolts Screws Round Head Square Neck and Hex Nuts & Flat Washers 304 Stainless Steel 18-8 Full Thread Coverage

  • Package Includes: 8 Pcs Carriage Bolts (5/16-18 x 2-1/2") + 8 Pcs Hex Nuts (5/16"-18)+ 8 Pcs 5/16" ID Flat Washers.
  • Screw length (including the neck): 2-1/2 inch or 63mm.
  • Material: 304 stainless steel (A2) and no exterior finish, greater strength and corrosion resistance performance than regular stianless steel or zinc plated fasteners..
  • Carriage bolts have a dome shaped head and a square neck generally requiring a hex nut and flat washer. The square neck makes them self-locking when used within a square hole..
Check Stock

3/8-16 x 4 Stainless Steel Carriage Bolts with Hex Nuts and Flat Washers 304 Stainless Steel 18-8 Square Neck Bolts and Nuts Assortment Full Thread Coarse Thread 6 Sets

  • Package Contents: 6 Sets, each set includes one piece carriage bolt, hex nut and flat washer..
  • Screw Length: 4 inch or 100mm (measured from under the round head, including the square neck height).
  • Design feature: Big round domed head designed to eliminate the need for a washer.
  • Square neck underneath the head helps self locking..
  • Made of 304 stainless steel 18-8 (no coating outside) which is superior to regular steel and any zinc plated fasteners, provides good strength and corrosion resistance in bad environments..
Check Stock

Crescent CP4PCSET 4 Pc. Phillips® Acetate Screwdriver Set

  • Multi-bit screwdriver / nut driver shaft holds 8 popular tips and converts to 3 nut driver sizes.
  • Includes industrial strength heat treated bits: 3/8-Inch, 5/16-Inch and 1/4-Inch nut drivers, #1 and #2 Phillips, 1/4-Inch and 3/16-Inch slotted, T10 and T15 TORX, and #1 and #2 square recess.
  • Interchangeable blade for fast and easy switch out.
  • Blast finish bit tips provide a firm hold and reduce cam-out.
  • The following replacement bits are available: see Cat. No. 32482 (#1 Phillips and 3/16-Inch Slotted), Cat. No. 32483 (#2 Phillips and 1/4-Inch Slotted), Cat. No. 32484 (#1 Square and #2 Square), and Cat. No. 32485 (T10 TORX and T15 TORX).
  • TORX is a registered trademark of Acument Intellectual Properties, LLC.
  • Assembled in USA of US and imported components.
Check Stock

1/4-20 x 2-1/2' Stainless Steel Carriage Bolts with Hex Nuts and Flat Washers 304 Stainless Steel 18-8 Square Neck Bolts and Nuts Assortment, Full Thread, Coarse Thread, 10 Sets

  • Package Contents: 10 Sets, each set includes one piece carriage bolt, hex nut and flat washer..
  • Screw Length: 2-1/2 inch or 63mm (measured from under the round head, including the square neck height).
  • Design feature: Big round domed head designed to eliminate the need for a washer.
  • Square neck underneath the head helps self locking..
  • Made of 304 stainless steel 18-8 (no coating outside) which is superior to regular steel and any zinc plated fasteners, provides good strength and corrosion resistance in bad environments..
Check Stock

Wera Kraftform Plus 354 Hex-Plus 3mm Hexagon Professional Screwdriver, 3\ Shaft Length,5023110001

  • Multi-bit screwdriver / nut driver shaft holds 8 popular tips and converts to 3 nut driver sizes.
  • Includes industrial strength heat treated bits: 3/8-Inch, 5/16-Inch and 1/4-Inch nut drivers, #1 and #2 Phillips, 1/4-Inch and 3/16-Inch slotted, T10 and T15 TORX, and #1 and #2 square recess.
  • Interchangeable blade for fast and easy switch out.
  • Blast finish bit tips provide a firm hold and reduce cam-out.
  • The following replacement bits are available: see Cat. No. 32482 (#1 Phillips and 3/16-Inch Slotted), Cat. No. 32483 (#2 Phillips and 1/4-Inch Slotted), Cat. No. 32484 (#1 Square and #2 Square), and Cat. No. 32485 (T10 TORX and T15 TORX).
  • TORX is a registered trademark of Acument Intellectual Properties, LLC.
  • Assembled in USA of US and imported components.
Check Stock

Cruiser Accessories 58350 Billet License Plate Frame, Chrome/Black,1 Frame

  • This frame has a billet design accented in black and re-designed with slotted fastener holes, 'Engineered to Show More Plate'.
  • This frame was designed with a black plastic insert so there is no paint chips.
  • This durable zinc die cast metal frame is chrome plated and carefully hand polished with a black plastic insert that will not rust or chip.
  • Designed to fit all standard 6x12 inch novelty/license plates.
  • User friendly and easy to install, see back of package for installation instructions.
  • This frame has been redesigned with slotted bolt holes and is engineered to show more plate.
  • This zinc die cast metal frame is chrome plated with a black plastic insert that will not rust or chip.
  • Engineered to show more of your license plate.
Check Stock

5 Pieces Detachable Magnetizer Screw 1/4\ 6.35mm Metal Hex Screwdriver and Power Bits (Yellow)

  • Multi-bit screwdriver / nut driver shaft holds 8 popular tips and converts to 3 nut driver sizes.
  • Includes industrial strength heat treated bits: 3/8-Inch, 5/16-Inch and 1/4-Inch nut drivers, #1 and #2 Phillips, 1/4-Inch and 3/16-Inch slotted, T10 and T15 TORX, and #1 and #2 square recess.
  • Interchangeable blade for fast and easy switch out.
  • Blast finish bit tips provide a firm hold and reduce cam-out.
  • The following replacement bits are available: see Cat. No. 32482 (#1 Phillips and 3/16-Inch Slotted), Cat. No. 32483 (#2 Phillips and 1/4-Inch Slotted), Cat. No. 32484 (#1 Square and #2 Square), and Cat. No. 32485 (T10 TORX and T15 TORX).
  • TORX is a registered trademark of Acument Intellectual Properties, LLC.
  • Assembled in USA of US and imported components.
Check Stock

Short Stubby Screwdriver with Reversible and Magnetic Bit - Phillips and Slotted-Flat - Gato Tools, Blue

  • Multi-bit screwdriver / nut driver shaft holds 8 popular tips and converts to 3 nut driver sizes.
  • Includes industrial strength heat treated bits: 3/8-Inch, 5/16-Inch and 1/4-Inch nut drivers, #1 and #2 Phillips, 1/4-Inch and 3/16-Inch slotted, T10 and T15 TORX, and #1 and #2 square recess.
  • Interchangeable blade for fast and easy switch out.
  • Blast finish bit tips provide a firm hold and reduce cam-out.
  • The following replacement bits are available: see Cat. No. 32482 (#1 Phillips and 3/16-Inch Slotted), Cat. No. 32483 (#2 Phillips and 1/4-Inch Slotted), Cat. No. 32484 (#1 Square and #2 Square), and Cat. No. 32485 (T10 TORX and T15 TORX).
  • TORX is a registered trademark of Acument Intellectual Properties, LLC.
  • Assembled in USA of US and imported components.
Check Stock

(10) 3/4-10x2#3 Grade 8 Dome Head Plow Bolts Plain & Oil

  • Price For: Each Finish: Zinc Material: Carbon Steel Head Type: #3 Flat Item: Plow Bolt Head Angle (Deg.): 80 Type: Countersunk Square Neck Grade: 5 Includes: Nut Square Width: 0.450" Head Height: 0.364" Head Dia.: 0.826" Meets/Exceeds: SAE J 429, SAE J 995 Thread Size: 7/16"-14 Tensile Strength (PSI): SAE J 429, SAE J 995 Length: 2" Key Height: -.
  • Key Width: - Country of Origin (subject to change): Multiple.
Check Stock

Dragon Fit Joggers for Women with Pockets,High Waist Workout Yoga Tapered Sweatpants Women's Lounge Pants (Small, Joggers78-Black)

  • Multi-bit screwdriver / nut driver shaft holds 8 popular tips and converts to 3 nut driver sizes.
  • Includes industrial strength heat treated bits: 3/8-Inch, 5/16-Inch and 1/4-Inch nut drivers, #1 and #2 Phillips, 1/4-Inch and 3/16-Inch slotted, T10 and T15 TORX, and #1 and #2 square recess.
  • Interchangeable blade for fast and easy switch out.
  • Blast finish bit tips provide a firm hold and reduce cam-out.
  • The following replacement bits are available: see Cat. No. 32482 (#1 Phillips and 3/16-Inch Slotted), Cat. No. 32483 (#2 Phillips and 1/4-Inch Slotted), Cat. No. 32484 (#1 Square and #2 Square), and Cat. No. 32485 (T10 TORX and T15 TORX).
  • TORX is a registered trademark of Acument Intellectual Properties, LLC.
  • Assembled in USA of US and imported components.
Check Stock