Reviews Slotted Pipe

Glarks 85Pcs Pipe Strap Clamp Set M8 M10 M12 M14 M16 M20 M25 304 Stainless Steel Two Hole Strap Heavy Duty Rigid Pipe Strap U Bracket Tube Strap Assortment Kit For Pipe Tube Fixing

  • ♛【High Quality Material】: All the pipe strap clamps are made of 100% 304 stainless steel, with high performance of corrosion resistance and acid resistance, they are strong and durable, when installing on the pipe, you will no longer worry about them rusting and breaking..
  • ♛【Special Slotted Design】: Special slotted design makes the two hole pipe strap is more sturdy and not easy to deform, make the clamps to lay a rigid fixation for pipes on various surfaces like wall, wood, and structures like a circle or cylindrical. Secure your pipes on concrete walls..
  • ♛【Easy to Install】: The pipe strap clamps only need to cooperate with screws can be installed, convenient and fast. resistance to heat up and cold shrink, the surface is polished, anti-oxidation, long-term service..
  • ♛【Wide Application】: The pipe strap is a perfect choice for fixing rubber pipes, oil pipes, plastic steel pipes, gas pipes, stainless steel pipes, indoor and outdoor drain pipes and so on. Also, they can be installed and used repeatedly, and the pipeline can be safely fixed. Enough quantity and size can meet your needs on different pipe..
Check Stock

Flange Wizard 38240-T Threaded Pipe Flange Aligners, 1/2" - 1-7/16"

  • Features slotted pins with "friction fitting" knurled nuts for flanges to 30" - 150 lbs.
  • All models of the pipe aligner will two-hole (make 2 holes of the flange horizontally level with the ground) and vertically level the face of the flange in one step.
  • All models come with 360° vials that just "snap" in and out for easy replacement.
  • The aligner inserts easily into pipe, centers snugly against the inside pipe diameter and automatically aligns with the pipe Axis.
Check Stock

EVIL ENERGY 2.0' Exhaust Narrow Band Muffler Seal Clamp Stainless Steel 2PCS

  • Joins 2.0 inch OD pipe to 2.0 inch ID pipe. Exhaust clamp is a simple, effective way to connect heavy-duty exhaust system components such as pipes, mufflers, catalytic converters, headers, manifolds. Torque: 63 N·m. Package: 2pcs..
  • Connection Type: ID-OD slip fit connection with either straight or "Z" compression slit. This narrow exhaust band clamp commonly use on slotted pipes or stainless steel connection where disassembly for service is likely..
  • Distributes the clamping force evenly over the entire 360° to provide tight sealing and prevent leaks and prohibit exhaust pipe distortion. Material: 304 stainless steel strap and mild steel hardware, serviceability, durability and reusable..
  • Easy to handle and disassemble. Suggestion: Wrap the pipe with several layers of aluminum tape over the clamping surface to take up for slight out-of-round and help seal..
  • EVIL ENERGY provides stainless steel exhaust clamp 3-month warranty. We value your shopping experience and strive to offer a high-quality product and service..
Check Stock

2) Kicker 12KMTED 6.5\ Dual Marine Weather-Proof Speakers Tower Empty Enclosures

  • Features: Kicker KMTED Dual 6.5'' Boat Speaker Enclosure. Package includes (2) enclosures that hold a total of (4) speakers.
  • Tough ABS, weather-proof empty enclosures with slotted mounting holes for different bolt patterns. Enclosures feature a nine-degree axis rotation in either direction for aiming maximum sound quality.
  • Aluminum tower-pipe clamps (2-5/8'') with three adapter sizes (2-1/4'', 2-3/8'', 2-1/2''). Durable, stainless-steel push-type connectors. Includes mounting hardware and polyfill.
  • KMTAP adapter pack (sold separately) fits more pipe diameters. Accepts all KICKER 6-1/2-inch component speakers, coaxial and horns..
Check Stock

3.0 Inch 2 Bolt Exhaust Flange Connection Kit Stainless Steel Exhaust Flange and Gasket with 2 Bolts& Nuts 3.0"(77mm)

  • 2-Bolt Exhaust Flange Connection Kit.It is Including 1 Pcs 3.0 Inch Flange , 1 Pcs 3.0 Inch Gasket, 2 Pcs of M10*40mm Flanged Hex Head Bolts, 2 Pcs of Flange Hex Nuts.
  • 3.0" Hole Size: The Hole Size is 3.0 Inch(77mm).it is Pefect fitting Exhaust Pipe/Downpipe Which is the Pipe outside diameter 3.0 Inch(75-76mm).
  • With Oval Hole: Bolt to Bolt distance is 3.6- 5.1 inch (92~130mm),The Slotted Hole munch better to facilitate pipe connection..
  • Stainless Steel Material: The 2 bolt 3.0 " Exhaust Flangle material is made with Stainless Steel 201 provide good strength and corrosion resistance.
  • Exhaust Flange.it is good design to reserve about 3mm thickness for welding port..
Check Stock

HEATIT Mobile Home 100-feet HEATIT HTM Braid Self Regulating heating cable Water Line Freeze Protection

  • ...ong the cable. No worry about overheat risk. More Safe. Can be used by straight, spiral and overlap. More functional..
  • Additional tools which you may need: High quality electrician’s tape such as HEATIT glass cloth tape, 1/2” thick fiberglass insulation with vapor seal, wire cutters or heavy scissors, Phillips#2 slotted screw drivers, Ruler or measuring tape..
  • HEATIT HTM connection kit is necessary for the pipe freeze protection application. Please purchase this kit separately.If you also need the cable to be used on the valve you may need longer cable. The Maximum cable length is 75 feet. Use of longer length may cause the internal fuse to blow..
  • Quick test: Once insulation is finished, plug the cable into a 120V AC outlet. Don’t use any of the water for about 1 hour. After that turn on the tap on HEATIT HTM protected pipe and test the water temperature. You should feel the slight warm from the water..
Check Stock

NPT Thread Forming Taps - 5 Pieces 1/8 1/4 3/8 1/2 3/4 Pipe Taps Set with Storage Box Drill Bits for Cleaning or Re-thread Damaged or Jam Pipe Threads High-speed Steel Material

  • ...s as they cut, making them well-suited for most applications in shallow cuts..
  • The thread is standard, clear, and the cutting resistance is smaller than that of ordinary taps, which is the best choice for through-hole processing. Standard tooth spacing, no bad teeth, no burrs, making repair and maintenance a breeze. Slotted in the front section, chip removal in the upper phase, easy to repair, through holes and blind holes are available..
  • Product Packaging Upgrade: The set comes with a convenient red storage box to keep the taps organized and easily accessible. The box also helps protect the taps from damage during transportation and storage. These thread forming taps are perfect for plumbers, mechanics, or anyone who works with pipes and fittings. Use them to create new threads or repair damaged threads quickly and efficiently..
Check Stock

OhLectric Pipe Support Strap - Steel Pipe Strap with 2 holes - Heavy-Duty 1 inch U Bracket - Zinc Coated Tension Tube Clip - Pipe Clamp for EMT Conduits - OL-72860 - 25 PCS

  • DELUXE QUALITY MATERIAL: Constructed using high-quality steel metal with 1-inch thickness, OhLectric’s pipe straps are sturdy, strong and reliable. Also, have a strong resistance to salt, rust, and corrosion. A must-have water and oil proof clamp for your plumbing needs!.
  • PRECISE SLOTTED DESIGN: The unique U style design makes our 2-hole pipe strap to lay a firm fixation for pipes on various surfaces like wall, wood, and structures like a circle or cylindrical. Secure your pipes on concrete walls or even on ceilings with these steel metal straps for pipe!.
  • REINFORCED RIB: Designed to provide the extra strength, our EMT conduit strap has a prominent middle part that holds the heavy load pipes tightly and prevents them from twisting. This strong rib structure makes the clamp suitable for all indoor and outdoor piping needs!.
  • RIGHT SIZE: Made to fit for all 1-inch pipes, this wide pipe strap is the perfect clamp to hold all types of pipes like PVCs, and EMT conduits, Wire Pipes, Hoses, Electric Lines, or Cables for a panel and frame application. The polished silver-tone color gives the attractive look, making it suitable for humid environments!.
  • EASY INSTALLATION: Thanks to the high-quality steel material, OhLectric’s metal pipe strap can last for years....
Check Stock

GenExhaust Universal Generator Exhaust System Double Layer Wall Attachment for 1" ID Silicone/Soft tubing

  • All internal facing seams are welded all round to reduce the chance of leakage.
  • Slotted mounting plates for the inside wall and a lined clamp is also supplied with this kit..
  • The pipe can become extremely hot depending on the tubing length, generator size and workload..
  • Provisions must be made to avoid contact with flammable or non-heat resistant materials..
Check Stock

GenExhaust 1'' Double Shielded Through Wall Steel tubing-Short, (TW4DWS)

  • All internal facing seams are welded all round to reduce the chance of leakage.
  • Slotted mounting plates for the inside wall and a galvanized u-bolt clamp is also supplied with this kit..
  • The pipe can become extremely hot depending on the tubing length, generator size and workload..
  • Provisions must be made to avoid contact with flammable or non-heat resistant materials..
Check Stock

GenExhaust Universal Generator Exhaust System Double Layer Wall Attachment for 1-1/2" ID Steel tubing

  • All internal facing seams are welded all round to reduce the chance of leakage.
  • Slotted mounting plates for the inside wall and a galvanized u-bolt clamp is also supplied with this kit..
  • The pipe can become extremely hot depending on the tubing length, generator size and workload..
  • Provisions must be made to avoid contact with flammable or non-heat resistant materials..
Check Stock

GenExhaust Universal generator exhaust system double layer wall attachment for 1" ID steel flex tubing

  • All internal facing seams are welded all round to reduce the chance of leakage.
  • Slotted mounting plates for the inside wall and a galvanized u-bolt clamp is also supplied with this kit..
  • The pipe can become extremely hot depending on the tubing length, generator size and workload..
  • Provisions must be made to avoid contact with flammable or non-heat resistant materials..
Check Stock

MTMTOOL Band Clamp Quick Release Band Clamp Strap Clamp for Woodworking Frame Clamp

  • Overall Size: 410 x 28 x 185mm/16.14" x 1.1" x 7.28"(L*W*H).
  • Special slotted design makes it more sturdy and not easy to deform.
  • Made from Galvanized material. Clamps are sturdy, strong and reliable.
  • The surface is super smooth and burr-free with the fine workmanship.
  • Suitable for indoor piping, avoiding use outdoors and in places prone to moisture.
Check Stock