Reviews Slide Switches

Honeywell TH3110D1008 Pro Non-Programmable Digital Thermostat, 1 Pack, White

  • Pro 3000 1 heat/1 cool non-programmable digital thermostat white.
  • Backlit digital display - both current and set temperatures are easy to read in various lighting conditions.Shows both current and set temperatures at the same time.Precise comfort control [ 1 F ( 0. 5 C)] - maintains consistent comfort to the highest level of accuracy.Basic operation - easy-to-use slide switches allow you to select the heat or cool mode, and operate the fan.
  • Backlit digital display - both current and set temperatures are easy to read in various lighting conditions.
  • Shows both current and set temperatures at the same time.
  • Precise comfort control [± 1 F (± 0.5 C)] - maintains consistent comfort to the highest level of accuracy.
  • Basic operation - easy-to-use slide switches allow you to select the heat or cool mode, and operate the fan.
Check Stock

Slide Island Inflatable Boat Slide and Mat

  • Easily switches between "slide mode" and "mat mode".
  • Soft, foam filled handles for easy maneuvering.
  • High strength nylon webbing support straps for use in "slide mode".
Check Stock

20PCS Slide Type Switch Module 1-Bit 2.54mm 1 Position Way DIP Red Pitch

  • High quality slide type double row dip switches..
  • Pitch : 2.54 mm.Positions:1 Positions DIP switch.
Check Stock

Streamlight 69600 TL-Racker 1000 Lumen Forend Light for Selected Mossberg 500/590 Models with CR123A Lithium Batteries, Black, Box

  • The Streamlight 69600 TL Racker is compatible with the following models Mossberg 500, 590, 590A1, Cruiser, and Persuader (12 Gauge Only & 7 ¾" action slide).
  • It is also compatible with Flex 500, and Maverick 88 but Mossberg must be contacted to obtain action slide assembly prior and confirm fitment before purchase.
  • Compatible with Mossberg Shockwave with 7 ¾" action slide.
  • not compatible with 500A and 500 Tactical.
  • Please refer to Streamlight 69602 for the Mossberg 590 Shockwave with 6 ¾" action slide.
  • Please contact Mossberg directly for fitment prior to purchase.
  • Ambidextrous switch (switches on both sides) with momentary and constant-on functionality.
Check Stock

Qiying 100 Pcs SS12D00G3 2 Position SPDT 1P2T 3 Pin PCB Panel Mini Vertical Slide Switch 0.5 Amp, 50V DC

  • "Crisp" control:This switches can make constant contact and stay in position.They snap into place with a nice clicks when you move them.Slide one way and it connects center to outside post.Slide it again and it connects center to the other post.You can easily tell if the circuit is open or closed at a glance..
  • Mini size:These switches are physically small enough to cleanly integrate with the 3D print model,perfect for electricity experiments and small prototyping.They allows you to hide the switch in the seam of a 3D printed object,avoiding the switch protrud out of the object's body and keep it away from damage!.
  • Easy install:The pins are not too big/too small and spaced nicely to fit into breadboard holes,also helps them to handle a decent about of current or a couple of amps.Depending on how you connect them to your circuit they will either be on/off (if you use 2 adjacent pins) or can also be on/on (use all 3 pins)..
  • Quality plastic:These components are of high quality plastic with well manufactured and well designed,very resistant to the heat of the soldering iron.Also fairly lightweight for projects you don't want to bulk up or weigh down.Use it to switch a tiny LED light on a micro drone where every gram counts!.
Check Stock

Taiss 35PCS DIP Switch Assorted Kit 1 2 3 4 6 8 10 Position 2.54mm Double Row On Off DIP Switches Slide Type Switch for Circuit,Breadboards PCB Red

  • Product parameters:(1 Position 2 Position 3 Position 4 Position 6 Position 8 Position 10 Position) Seven different positions.Switching Rating: 24V DC 25mA ；Non-Switching rating: 24V DC 100mA ；Contact resistance: 50mΩ；Insulation Resistance:500MΩ/DC500V..
  • Widely used in:DIP switches are suitable for Breadboards, circuit boards, pcb projects, and other products used in data processing and communication..
  • Material:DIP switch is made of plastic and metal, which is strong, durable, portable and long in service life..
  • Product packaging: 1 2 3 4 6 8 10 Position DIP Switches(5 for each value)In a plastic box..
Check Stock

Hinged Knee Brace ROM Post OP Knee Immobilizer Brace Leg Braces Orthopedic Patella Knee Brace Knee Immobilizer Brace Support Orthosis, Adjustable for Left Leg and Right Leg(D002-1)

  • 1. Usage :knee immobilizer hinged offer strong fixation of knee joint after operation.
  • Treat for injury of side-secondary ligaments of knee joints.
  • For injury of front-crossing ligaments of knee joints.
  • Efficiently for acute injury of surrounding soft tissue of knee joints..
  • 2. Immobilizer :The brace lock of leg brace hinged such as an immobilizer, It has the ability to lock at any radius,There is a slide switch on both sides of the brace that you can set for range of motion. If these slide switches are set to the zero position you can set the lock/unlock switches on each side to “Lock” and it will then act as an immobilizer.The bilateral range of motion settings can be adjusted between 0°-120° of flexion and 0°-90..
  • 3. The thigh circumference measurement for this knee brace stabilizer : It doesn’t fit a specific circumference. The velcro straps allow fitting to most size thigh. If have very large thighs it also fits fine. please refer to the picture 6..
  • The length of the brace can be adjusted from about 50-63.5cm(19.69-25”)..
  • 5. Fitting people and leg : This medical Hinged Knee Brace fits right leg and left leg. And it is unisex,fits man and woman..
Check Stock

KiwiCo - Remote Controlled Snake Robot, Robotics Learning Toy, Ages 9+

  • REAL-WORLD SCIENCE: Slither into the world of robotics by building a remote-controlled snake robot! Learn all about how electricity powers your robot and how switches help your snake move and groove..
  • BUILD-IT-YOURSELF: Assemble and wire the electronics that drive the rc snake robot, customize it by adding a decorative skin of your choice, then try driving it through a maze!.
  • EDUCATIONAL: Read about how switches help your remote controlled snake shimmy from side to side, then explore engineering solutions inspired by nature — from real-world snake robots to bullet trains..
  • HANDS-ON FUN: Discover the sssensational ssscience behind robotics and learn about how snakes’ skeleton, scales, and skin help them slither and slide into tight spaces!.
  • TESTED BY KIDS, TRUSTED BY PARENTS: For over 10 years, KiwiCo has delivered engaging, hands-on products designed to spark the next generation of innovators to kids of all ages. With over 40 million products delivered worldwide, KiwiCo knows what kids love..
Check Stock

RANE ME15S Micrographic Equalizer

  • Overall level controls and passive bypass switches.
  • 20 mm filter slide controls with 6 dB or 12 dB slider range.
  • Balanced XLR and 1/4" TRS inputs and outputs.
Check Stock

Fieldpiece SDMN6 Pressure Switch Tester

  • Measures gas pressure, static pressure and differential.
  • Use to test and adjust pressure switches.
  • Features include a backlit dual display, zero adjust button, rugged rubber boot, magnetic hanger and auto power off.
  • Includes: 2 static pressure probes, 2 slide on gas adapters, quick connect leads, 3 hoses and Y-splitter and pump bleed accessory.
Check Stock

Honeywell Home CT30A1005 Standard Manual Economy Thermostat - Heat Only

  • Basic operation easytouse slide switches allow you to select the heat or cool mode.
Check Stock

Replacement for Harbor Breeze FAN35T Remote and Wall Mount for Harbor Breeze Ceiling Fans - FAN-35T, FCC ID: L3HFAN35T1

  • ♥This is not a universal remote control for the ceiling fan. As long as the fan has the receiver in it this remote will work with your harbor breeze ceiling fans,Just remember to set the 4 dip switches inside the battery compartment(they are kinda hidden behind the slot for the battery itself)..
  • ♥This transmitter is to be purchased only to replace the remote your fan was originally installed with. You cannot simply add this unit to any fan that does not already have a receiver pre-installed..
  • ♥Look inside the old remote with the battery cover off. There is a series of "DIP" switches (4). with a pen, slide the switches in the new remote to match the same pattern as the old remote. Replace the battery in the new remote and things should work..
  • ♥It is only a transmitter. This package does not include a receiver. If your original transmitter looks different from this product, please purchase a complete kit with a receiver in the store. Note: seasonal changes of forward and reverse cannot be changed with remote..
  • ♥Make sure your original transmitter model is as shown on the details page, otherwise the remote control may not match your receiver. Frequency: 303.9, Small frequency difference can also match..
Check Stock

Double Row Dip Switch Assorted Kit Box Range 1 2 3 4 6 8 10 Position 2.54mm PCB Mountable On Off Dip DIL Switch,Slide Type Red Toggle Switch for Circuit Breadboards and Arduino 35Pcs

  • ●High quality slide type double row dip switches..
  • ●Pitch : 2.54 mm.Positions:1/2/3/4/6/8/10 Positions DIP switch.
  • ●Package Includes:Total 35 Pcs DIP Switches.Come with a transparent plastic box for easy storage..
Check Stock