Reviews Slide Hammer Puller Set

ATPEAM 9-Way Slide Hammer Puller Set | Wrench Adapter Axle Bearing Hub Auto Set, Axle Front Rear Wheel Bearing Dent Hub Gear Puller Remover Set

  • Extra Durable: The ATPEAM slide hammer puller set is made of drop forged steel pullers and fully hardened shaft and accessories, this will pull the hardest wheel bearing and wheel hub out of the tight position, and make sure this tool set a longer lifespan..
  • A Complete Puller Set: 1x shank and T-bar assembly, 1x 4.8 lb. sliding hammer weight, 1x cross nut, 2x hub grappler adapter flanges, 1x large forcing screw, 1x cone, 1x 3-way puller head, 1x vise grip adapter with double lead thread, 1x seal hook adapter, 1x dent puller retainer, 1x self-tapping screw, 3x 5 inch (127 mm) internal and external jaw bars, 3x hex jaw nuts, 3x hex head cap screws, and 1x blow molded storage case..
  • Auto Body Repair Tool Set: The slide hammer bearing puller kits are body shop tools that are used to aggressively remove tightly jammed parts or dents.
  • slide hammers consist of a long metal shaft with an attachment point at one end, a heavyweight that slides along the shaft, and a handle with a stop on the opposite end.
  • this hammer tool slide kit includes 2 jaws and 3 jaw internal and external pullers, rear axle bearing puller tool, locking plier adaptor, puller hook, and auto dent puller tool.
  • Wide Application: The 9-way slide hammer puller set with 4.8 lb slide hammer is idea....
Check Stock

ABN Slide Hammer Puller Set - 5 lb Slide Hammer Axle and Hub Puller and Dent Remover Unit Auto Body Hammer Tool

  • [Versatile Slide Hammer Set] Whether pulling out deep dents on metal surfaces or removing mechanical, press-fit parts, the ABN 5 Pound Slide Hammer Bearing Puller Set works wonders.
  • Lightweight dent puller slide hammer tool ensures maximum pull power.
  • [Fits Your Needs] Each slide puller set includes a 23-inch (58.4cm) T-style slide hammers bar, a 5 lb hammer weight, and a nut.
  • 3-inch machined threaded section fits your internal or external 5/8-inch x 18 threaded adapters (not included).
  • [Easy to Use] Once attachment has been connected and is in place, slide the large slide hammer close to the end of the CV joint puller tool.
  • Then, pull back on the T handle, while you snap the weight towards the handle.
  • Weighted slide hammer adds torque and pull-power.
  • [Safe for Your Vehicle] Slide hammer and attachment design focused the added torque to a stable area to prevent damage that can happen when trying to remove press-fit parts.
  • [Built to Last] Hardened shaft and chrome-plating ensure optimum strength and resistance from rust, while the 4.7-inch (12cm) T-shaped handle provides a proper gr....
Check Stock

ABN Inner CV Axle Removal Tool - CV Axle Puller Slide Hammer Set with 5 lb Slide Hammer and CV Joint Puller Adapter

  • [Remove Front Wheel Drive Axles Easily] To replace or repair your CV axle joints easily, use the ABN FWD Axle Puller Slide Hammer Puller Set.
  • The CV joint puller adapter and large slide hammer bearing puller allow you to create added torque to loosen and remove stubborn axle shafts and water pumps.
  • [Fits Your Needs] Chrome-plated 23 x 5/8-inch hammer bar features a 5/8-inch x 18 threaded section to fit your adapters, while the slide hammer CV axle adapter has 48mm (roughly 2-inch) opening and a 2.5-inch depth to fit your needs.
  • [Easy to Use] Attach the inner CV axle puller to your axle slide hammer then position the adapter around the shaft behind the inner boot.
  • Slide the 5 lb hammer weight back and forth to create torque to pull out the axle.
  • Use lubricant fluid for added ease (not included).
  • [Safe for Your Vehicle] Slide hammer CV joint puller and attachment design focuses the added torque to the back of the housing to prevent damage to the roller bearing inside the joint.
  • Pulls CV joints on 1986-current Taurus/Sable.
  • [Built to Last] Hardened hammer shaft provides strength and d....
Check Stock

VCT 23" Long 5lb Slide Hammer Inner CV Joint Puller

  • The set includes a 23-inch T-style slide hammers bar, a 5 lb hammer weight, a nut, and a 2-inch opening 2.5-inch depth slide hammer CV axle adapter. They will remove the axle assembly without damage on 1986 to current Taurus and Sable..
  • The slide hammer and puller design provide a straight and even pull to protect joint off damage. The round bead on the puller will stop the hammer so it can never hurt the hand pulling on T-shaped handle..
  • Our CV joint puller adapter and large slide hammer bearing puller will create added torque to impose a large pressure on CV axle. This tool set could easily loosen and remove stubborn CV axles in minutes..
  • The product is made of premium steel, all the parts have hardened and finished with high-temperature oxide to ensure superior durability and rust and corrosion resistance..
Check Stock

Inner CV Joint Puller Slide Hammer Front Wheel Drive Axle Half Shaft Removal Tool Kit CV Axle Removal Tool Slide Hammer 63mm 48mm CV Joint Fork Adapter Attachments

  • ...ck to Remove CV Axle ⚒️ - With this CV axle removal tool the axle assembly is popped out of trans axle, and install the new axle,not need spend a lot of effort. Without damage to transmission case or inside roller bearing..
  • ⚒️ Perfect Joint Fork ⚒️ - This slide hammer puller set includes opening 63mm and 48mm CV joint fork disassembly adapter, the CV Joint Fork is be threaded internally, and the Slide Hammer stick is threaded externally. the joint fork could fit on the slide hammer stick, 63mm and 48mm fit most vehicle models, have wide use..
  • ⚒️ Heavy Duty ⚒️ -This slide hammer weighs 10.5 pounds and is 19.5 inches long, which is larger than the normal ones. So it has enough length to slide to generate more force, easier to use and work better.The hammer and VC joint fork are made of heavy-duty steel, durable and not easy to break..
  • ⚒️ Easy to Use ⚒️ - You need to attach the inner CV axle puller to your axle slide hammer, then place the adapter around the axle after the inner start. Slide the 10 lb. hammer weight back and forth to create torque and pull out the axle. Note: you can use lubricati....
Check Stock

Parts-Diyer Dent Puller w/Slide Hammer Set Replacement for Automotive Auto Body Truck Repair Tool Heavy Duty

  • EASY DENT FIX: The paintless dent repair kit quickly fixes dents on most vehicles without needing specialty tools.
  • Innovative slide hammer with dent removal kit makes dent pulling easy and effective.
  • HELPFUL ATTACHMENTS: The dent puller paintless dent repair set comes with versatile attachments to help pull dents in hard-to-reach places.
  • Car dent removal tool set allows you to pull dents on doors, bumpers, hoods, and more.
  • HIGH-QUALITY MATERIAL: The dent repair puller set is made from high-quality steel that resists rust and corrosion.
  • Materials in universal dent remover tool set won’t bend or break.
  • Slide hammer dent puller set is made for heavy-duty use.
  • TRANSPORTABLE: Paintless dent repair tools come in a sturdy, blow mold case for added protection and transportability.
  • Dent remover for cars set is perfect for the mechanic or serious DIYer.
  • INCLUDED: The set comes with 12 lb. slide hammer, slide hammer shaft, slide hammer handle, slide hammer adapter, deep hook, short hook, door edge tool, claw, straight driver, hook and chain, sheet metal screw and holder, and nose piece with screw.
Check Stock

Orion Motor Tech Rear Axle Bearing Puller Tool Kit and Slide Hammer Set | Axle Seal and Bearing Remover Set with Slide Hammer Yoke and 3 Rear Axle Puller Adapters, 1\ to 2-7/8\ IDs

  • 8PC. SLIDE HAMMER SET: This 8-piece professional axle, bearing, and seal removal tool set by Orion Motor Tech provides a 5/8" slide hammer, yoke, locknut, hook, and adapters to let you quickly, easily, and safely repair rear axle problems on the vast majority of domestic cars and light trucks.
  • AXLE PULLER SET: Lock the slide hammer onto the 4-point yoke to set up a flange type axle puller that will let you extract parts with threaded holes, including stud axles, spur gears, and more.
  • SEAL PULLER SET: The 5.5 pound slide hammer and its sturdy T handle provide the firm grip and torque needed to pop out worn and damaged seals and other press fit parts using the included hook.
  • BEARING PULLER SET: The small, medium, and large bearing puller adapters cover inner diameters from 1 to 1-7/8.
Check Stock

JOMBULL 9-Way Slide Hammer Puller Set, 19 pcs Rear Wheel Axle Hub Dent Shaft Puller, Slide Hammer Bearing Puller for Hub Seal

  • 【Durable】 Our 9-way slide hammer puller set is made of heat-treated forged steel, polished and chrome-plated to resist rust and wear, extending the service life..
  • 【Application】 The axle hub dent shaft puller is widely used for flanged rear axles, most front wheel drive hubs, pulling dents and other press fit parts..
  • 【Easy to operate】 You only need to install the axle hub dent puller on the part you want to remove, when pulling the T-handle, transfer the force to the shaft, the shaft drives the connecting end to pull out the part, repeat the above steps, the hub or bearing will be easily removed..
  • 【What you get】 Our 9-way slide hammer puller set includes, slide hammer, puller head, pulling adapter, cross block, inner/outer pulling jaw, hex jaw nuts and screws (3pcs), Vise-Grip adapter (single lead thread), sealing hook, 3-way puller head, cone, self-tapping screw and retainer..
  • 【Safe storage】 The slide hammer bearing puller comes in a blow molded case, sturdy and durable, and each piece has precisely sized compartments, easy to store and carry..
Check Stock

10lb Heavy Duty Inner CV Axle Removal Tool for FWD Vehicles Front Wheel Drive Axle Half Shaft Removal Tool,CATUDIY Inner CV Joint Puller Tool & Slide Hammer Puller Set with 48&63MM Joint Fork Adapters

  • Useful CV Axle Puller: To replace or repair the CV axle joints easily, use this slide hammer kit. The CV joint puller adapter and large slide hammer bearing puller allow to create added torque to loosen and remove stubborn axle shafts and water pumps, without damaging to transmission cases or other components.
  • Efficient Front Wheel Drive Axle Puller Set: Efficient & Heavy-Duty: Our 10.5 lb curved slide hammers are heavier and larger, and the length of 19.5 inches ensures sufficient length slide to generate more force(so the generated pulling force is also twice than normal 5lb slide hammer). Save efforts and works more efficiently.
  • Combination Kit Fits All Needs: The CV axle joint pulley removal tool includes a T-style slide hammers, a steel wire joint puller, 2pc 16mm nuts, opening 63mm and 48mm CV joint fork removing attachments. All you need to remove CV axle or half shaft are put in this easy-carrying plastic case.
  • Superior Material: Heat-treated FWD axle puller adapter with black oxide finish is durable and resists rust and corrosion. Slide hammer and the VC join fork is made of high quality heavy steel materials w....
Check Stock

ATP Blind Inner Bearing Puller Slide Hammer Set Hole Remover Extractor Set 5PCS

  • Premium Quality: The slide hammer puller set is constructed from drop forged steel with a fully chromed carbon steel slide hammer for maximum strength and longevity that resists rust and corrosion..
  • Specifications of The Bearing Puller Set: Overall length 15''/382mm, bearing extractor collets with internal capacity from 3/8"/10mm to 1-1/4"/32mm, bearing extractor 3/8"/10mm to 1/2"/14mm, 9/16"/15mm to 11/16"/19mm. 5/8"/18mm to 1"/25mm, 1"/25mm to 1-1/4"/32mm..
  • Great Function: Open clamps by turning handle clockwise to snug against the bearing, the blind bearing puller is great for pulling out evenly without damage the parts..
  • Wide Application: This pilot bearing removal tool blind hole bearing puller is ideal for pulling jobs,against the bearing for pulling out evenly without damage the parts, and perfect for professional and DIY use..
  • Storage Case: The slide hammer bearing puller is packed in a heavy-duty storage case with precision-sized compartments for every piece - great for storage and transport while lengthening....
Check Stock

Slide Hammer, Orion Motor Tech 9-Way Internal/External Slide Hammer Puller Set - Pulls Hubs, Rear Wheel Axle Shafts, Bearings, Bushings, Seals, Retainers

  • VERSATILE PULLER SET: The Orion Motor Tech 9-Way Slide Hammer Puller Set with 5 lb slide hammer is ideal for many pulling applications like flange-type rear axles, most front-wheel drive hubs, pulling dents, and other press-fit parts (bearings, bushings, gears, pulleys, etc.)..
  • INTERNAL & EXTERNAL JAWS: Includes 2-jaw and 3-jaw pullers for internal and external work to provide a variety of combinations to pull bearing, gears, and seals. 2 and 3-way cross blocks and cone-type puller provide the perfect jaw configuration for most jobs..
  • MULTI-FUNCTION: Includes a grip wrench adapter and a dent puller attachment for sheet metal or other unique pulling requirements. All the tools are contained in a heavy-duty organizer case to extend the life of your tools..
  • ULTIMATE DURABILITY: Built to last with rugged carbon steel alloy and chrome vanadium steel components, our tool kit can withstand accidental drops and years of heavy use without cracking or rusting..
  • ALL-IN-ONE TOOL SET: Complete 15 piece set for a wide range of pulling applications, including: Slide Hammer, Puller Head, Pulling Adapter, Cross Block, Internal/External Puller Jaw, Hex Jaw Nuts & Screws (3), Vise-Grip Adapter (single-lead thread), Seal Hook, 3-Way Puller Head, Cone, Self-Tapping Screw and....
Check Stock

VCT Rear Axle Bearing Remover Puller Slide Hammer Set Remove Semi-Floating

  • EASY TO USE: Slide flat end of puller through center of bearing and flat against backside of bearing, then slide washer down the center of the shaft against front side of bearing and tighten the nut on smaller end of puller, then thread a slide hammer (not included) to the puller and slide hammer back and forth until the bearing comes out.
  • The washer captures the bearing firmly to distribute the applied force over the entire bearing and prevent damage.
  • Use the VCT Pneumatic SAE Standard Rear Axle Bearing Puller 3-Piece Service Set – Domestic Car Vehicle Bearings Removal Tool Kit to service semi-floating rear axle bearings on your vehicle.
  • These tools make the job simple and prevent damage to your bearings when pulling.
  • Much easier than claw-type axle bearing pullers that slip off and chew up the old bearings.
  • For removal only, not intended for installation.
  • FITS YOUR CAR: Standard SAE sizes work for most American domestic makes and models.
  • Set includes the following sizes to fit main bearing tube – 1 inch to 1-7/8 inches, 1-5/16 inches to 2-3/8 inches, and 1-3/8 inches to 2-7/8 inches.
  • Sizes permanently laser-etched on tool for easy identification.
  • Each tool fits a basic slide hammer with a 5/8-inch x 18 thread pitch.
Check Stock

E-cowlboy Inner CV Joint Puller Slide Hammer Front Wheel Drive Axle Half Shaft Removal Tool Kit,63mm 48mm CV Joint Fork Adapter,Heavy Duty 10 Pounds Slide Hammer

  • 【Slide Hammer Puller Set with Plastic Suitcase】: This kit include: 1 heavy duty slide hammer.
  • 2pc 16mm nut. this kit have everthing you need to remove CV axle or half shaft, all the tools put in a plastic case, easy to carry..
  • 【 Perfect Joint Fork】 ： This slide hammer puller set includes opening 63mm and 48mm CV joint fork disassembly adapter, the CV Joint Fork is be threaded internally, and the Slide Hammer stick is threaded externally. the joint fork could fit on the slide hammer stick, 63mm and 48mm fit most vehicle models, have wide use..
  • 【Slide Hammer Made of Heavy Steel】The slide hammer and the CV joint fork is made of heavy-duty steel, which can withstand huge pressure without deformation, is not easy to break, and is more durable. The sliding distance is 19.5 inches, and the weight is 10 pounds .The overall ergonomic design of the slide hammer, the handle is curved, the surface is large, and it is more comfortable to use. Use this universal joint slide hammer to work more efficiently..
  • 【Quick to Remove CV Axle 】：With thi....
Check Stock