Reviews Sleek Black Tail Lights

Partsam 2x Universal 16 LED Stop Tail Turn Signal Backup Reverse Brake Clearance Marker Lights Lamps Red/White Replacement for Jeep YJ JK CJ Truck Trailer Waterproof 12V

  • Partsam (2 x Red/White) stop / turn / tail /signal and backup lights for Truck Trailer..
  • This square stop turn tail light is universal, Also you can DIY it to suit for Jeep YJ JK ,Jeep CJ CJ-7 CJ-5 ( NOT factory Jeep light, Modification is needed. ).
  • Note: license plate light is not included!.
  • Combo functions as stop, turn, tail, back-up light, and reflectors for most 12V vehicles like Jeep, trailers, trucks, SUVs, RVs, caravan,vans, boats etc..
  • Each equiped with 16pcs LED lights inside, including 12 red square LEDs (Stop,Turn & Tail) & 4 white square LEDs (Back-up/Reverse).
  • ☛☛No License Plate illuminator and side indicators Included ☚☚.
  • EASY TO INSTALL: Black wire is the GROUND.
  • Black+Brown, Red light is low brightness.
Check Stock

Partsam 6Pcs 5x3' Rectangle Stop/Turn/Tail & Backup/Reverse Truck Trailer Hitch Light 12 LED Grommet Hardwired Flush Mount (4xRed+2xWhite)

  • Package includes 6 Pieces 5x3 Rectangle Led Stop Turn Tail Lights and Backup Reverse Truck Trailer Hitch Lights(4 Pieces red lights and 2 Pieces white lights). Rate for 12V,test to 13.8V.
  • Each led tail light has 12 leds and provide super night vision and enhance visibility during night. Functions of 5x3 Rectangle led trailer lights: stop light, turn signal light, tail lights (Red 5x3 lights) and back-up lights or reverse lights(White 5x3 led lights). NOTE: People call it 3x5 rectangle led lights on Market, but the actual sizes are as following: 5.14" x 3.27" x 1.00" (light only), 6.25" x 4.26" x 1" (overall size), drill a hole about 5-5/8" to install it.
  • These taillights are HARDWIRED with 3 wires: White Wire is the Ground.
  • NOTE: These 3x5 lights are NOT "plug and play" lights. It does not have the standard 3 prong plug that these style trailer lights typically do, You need to hardwire them. It’s a very easy thing to do.
  • These led trailer tail lights are univeral for almost all vehicles, such as: Trucks, trailers, tractors, semi trailers, Dump Trucks, horse trailer, enclosed trailer, cargo trailer, golf cart, flatbed, UTV etc..
  • Warranty: We truly offer 1 year warranty for these recta....
Check Stock

Yoshimura 12-16 Kawasaki EX650E Fender Eliminator Kit (DOT Compliant)

  • Yoshimura has always been synonymous with quality craftsmanship, precision fitment, and impeccable quality..
  • Their Fender Eliminator Kits are no exception, and they are sure to give your bike the sleek race look that every rider craves..
  • These kits feature a precision laser-cut stainless bracket that tucks discreetly under the tail section of the bike, as well as a premium CNC-machined light holder which houses 4 L.E.D..
  • The light housing is anodized black and laser etched with Yoshimura’s logo..
Check Stock

12V Trailer Led Light Kit, 2x Square Led Stop Turn Tail Brake License Plate Running Lights w/ 25ft Wiring Harness/6x Mini Marker Lights/15' 11LED Trailer Tail Brake Light Bar/License Plate Bracket

  • This 12v led trailer lights kit includes 2Pcs square rear combination tail lights, 6Pcs Mini Oval side fender marker lights (2Red+4Amber), 1Pc 15.5 Inch Trailer 3rd brake identification tail light bar, 25ft wiring harness with 4-flat plug(long enough to reach end of trailer), license plate bracket, mounting hardware. This trailer led light kit has everything you need to upgrade your trailers at once.
  • This boat trailer lights led submersible kit has multi functions: stop light, brake light, turn signal light, tail light, running light, rear reflex reflector, side marker light, side clearance lights, side reflex reflector, license plate illuminator, clearance Light, third 3rd brake light bar.
  • Wiring Tips: white wire is ground, yellow wire is high brightness for brake Light and brown is low brightness as Running Light/Left License Plate illuminator(Square tail Lights).
  • white is ground, red is high Brightness for brake/stop/turn light, black is low brightness as running Light(15.5″ led trailer light bar).
  • white is ground andblack is positive(mini side marker lights).
  • Brightness: Square LED trailer light has 15 Diodes (12 Red+3 Red) as stop, turn, tail, side marker, side reflex, and rear reflex functions and on left side Built-in license plate light(3 w....
Check Stock

QUASCO Led Motorcycle Brake Tail Light Smoked Lens Taillight Compatible with Harley Road King Electra Glide Ultra Classic XL883 XL883L, Sportster

  • Compatible with 2007-2014 Heritage Softail Classic Shrine SE FLSTC, 2014-2017 Iron 883 XL883N, 2002-2009 Night Train FXSTB, 2007-2013 Road King Classic FLHRC, 2002-2006 Road King Firefighter SE EFI FLHRI, 2000-2008 Road King FLHR, 2003-2006 Road King Shrine SE FLHR, 2014-2016 Seventy Two XL1200V, 2004-2008 Sportster 1200 Roadster XL1200R.
  • Super Bright: Built in 12pcs SMD leds, brighter than incandescent bulb, super bright light output makes you more noticeable when driving to increase safety. 3-in-1 design, acting as tail light, brake light and license brake lights. Best Replacement for dull stock taillight.
  • Waterproof: Made of high quality ABS plastic, well-sealed on the edge, and come with foam sealing gasket, effectively keep water out of housing, stay illuminated in rainy days. Low profile smoked lens gives your motorcycle a sleek look.
  • Easy Installation: 3-wire configuration, come with adapter, just insert the pigtail into corresponding hole. please make sure every wire in proper placement, red wire for brake light, blue wire for running light and black wire for negative.
  • Package Including:1 Pcs smoked led tail light motorcycle taillight brake lights, worry-free 180 days manufacture warranty, and friendly customer service.
Check Stock

DTR2017 Smoked LED Tail Light, Integrated Motorcycle Rear Brake License Plate Lights for Harley Dyna, Road King, Street Glide, Sportster 1200, Softail and Touring

  • Package includes 2 Pieces UTV tail lights Replacement for Polaris Ranger 570 900 1000 / Brutus HD / General rear tail lights. This new Led tail light can directly replace your stock tail light and fit both your driver side and passenger side. Replacement for Part Number: 2412774.
  • Each UTV tail light has 14 piece high quality 3528 LED chips with more than 30K working hours, two step lighting and can work as both running light/tail light and brake stop light.
  • Compatibility of the Rear tail light: Compatible with Polaris Ranger 570 full size tail light/Ranger 900 tail light/Ranger 1000 tail light/Compatible with Ranger Brutus HD tail light/Compatible with Polaris Ranger XP 1000 tail light/Compatible with Polaris Ranger XP 900 tail light/Compatible with Polaris Ranger Crew XP 1000 tail light/Compatible with Polaris Ranger Crew XP 900 tail light/Compatible with Polaris Ranger Crew 570 tail light/Compatible with Polaris Ranger Diesel tail light etc..
  • This tail light has some difference form the stock tail light. It does not have the reflective sticker on the side that your stock tail lamp has. Of course you can use the 3-M reflector tape for it. Also this tail light assembly does have inserts for bolts. You will need to ch....
Check Stock

Partsam 8Pcs 4" Round Red LED Trailer Tail Light, 4 Inch Round Led Stop Turn Tail Lights Brake Brake Trailer Lights for RV Trucks, Rubber Grommets and 3-Prong Wire Pigtails Included

  • Package includes 8 Pieces 4 inch Round Led Stop Turn Tail Lights Red, Grommets and 3-prong wire pigtails are included for complete installation.
  • This Waterproof round led trailer lights 12 LED serves 3 functions as stop light, turn signal light and tail light.
  • Recessed mount with grommet and Pigtails.
  • These round tail lights are Approx. 5 inch diameter Grommet Ring and 4" inner diameter and 1 3/16" Thickness.
  • IP65 waterproof light fixture and effectively withstand the invasion and corrosion of sand, dust, dirt, rain, snow etc..
  • Easy to install: White is the ground, red is the high brightness for stop light / turn light / brake lights and Black for low brightness as tail light / running light.
  • These 4 inch round led lights are impact resistant and less susceptible to shock damage. Each LED Light is water-tight sealed. These LEDs draw less current, generate less heat and are brighter and light faster than an incandescent bulb.
  • Universal Fit: These round led tail lights are compatible with almost All automobi....
Check Stock

AUXMART Universal LED Trailer Tail Lights, 16 LED Smoked Stop Brake Turn Reverse Tail Lights Rear Combination for Jeep Wrangler YJ TJ CJ Truck Trailer Boat RV Flatbed, 12V

  • ...op turn signal light work with most 12V vhicles.
  • Unique black bezel color with smoked lens, give you the latest look and attitude. Suitable for Truck, Trailer, SUV, RV, Camper, Boat, Flatbed, Bus, Forklifts, Pickup, Coaches and Wrangler CJ YJ TJ, etc..
  • Ultra Bright LED --- 16 ultra bright LEDs, brighter than factory lights. Provides tail lights, brake lights, turn signals and reverse lighting functionality (No license plate light).
  • 12 red for brake/turn/tail functions, 4 white LEDs for revers functions..
  • Sealed & Waterproof --- 16 LED dual color trailer tail light is made of high quality ABS housing and PC lens, and completely sealed in epoxy to resist corrosion & moisture.
  • effectively withstand the invasion and corrosion of sand, dust, dirt, water and other impact of inclement weather..
  • Easy Installation --- 3 studs can be mounted directly on any flat surface. And it with 4-color coded wire connection for easy installation.
  • Black wire is ground, white wire is reverse light, red wire is brake light, brown wire is tail light..
  • You Will Get --- 2 x 12V 16 LED combination tail lights.
  • Professional installation is strongly recommended (Not including instructions, Please note that some modification or drilling is required for installation on Wranglers and Jee....
Check Stock

Lamin-x Custom Fit Tint Tail Light Covers for Jaguar XK (12-15)

  • A light tint film for your tail lights that tones down the red. Adds a sleek look to your tail.
  • Protects against rock damage, sand-blasting, or cloudiness.
  • Kit includes film for both sides of your vehicle and DIY installation instructions.
  • Made in USA, 5-year warranty, industry-leading product.
Check Stock

Lamin-x Custom Fit Tint Tail Light Covers for Buick Enclave (13-16)

  • A light tint film for your tail lights that tones down the red. Adds a sleek look to your tail.
  • Protects against rock damage, sand-blasting, or cloudiness.
  • Kit includes film for both sides of your vehicle and DIY installation instructions.
  • Made in USA, 5-year warranty, industry-leading product.
Check Stock

90 Pack 3/4 Inch LED Side Marker Lights Mini Trailer Button Lights Round Signal Lamp 3 LED Sealed Flush Mount Bulb for Boat Lorry Truck Pickup Bus 12V DC, Amber, Red, White

  • 3/4 Inch LED Lights Kit: you will receive 90 pcs trailer side marker indicator lights, the set includes 30 pcs amber lights, 30 pcs red lights and 30 pcs white lights.
  • Our marker light is rated at 12V DC, suitable for most motor vehicles, such as trailer, truck, bus, van, pickup, boat and so on.
  • 2 Wire Design: 3/4 inch LED side marker light contains 2 end wires and rubber grommet, 2 wires connection: black is negative and red is positive.
  • Hole diameter: approx. 2.8 cm/1.1 inches.
  • Sealed IP68 waterproof, there is no problem working above or under water.
  • High Brightness: each round indicator lamp comes with 3 pcs quality LED and 1 energy saving bulb that gives about 60 lumens.
  • The signal tail light can output high luminous efficiency to make your night safety, power saving and low power consumption.
  • Easy Installation: waterproof front rear marker indicators are easy to install with no screws, drill a hole to put the rubber grommet and mount the lights onto the rubber.
  • These 3/4 inch tail light can be installed on the place you'd like to mount them by drilling a 3/4 inch hole in a flat panel.
  • Wide Application: our 12V 3/4 inch LED marker lights can commonly serve as trailer side marker lights, turn signal lights, identi....
Check Stock

Kojem LED Tail Lights Compatible with 1999-2006 Chevy Silverado 1999-2002 GMC Sierra 1500 2500 3500 Taillight Lamp (Clear Lens+Black Housing)

  • FITMENT- LED Taillight Tail Lights Lamp Compatible with 1999-2006 Chevy Silverado 1500/1500HD.
  • 2001-2002 GMC Sierra 3500. Fits Fleetside Bed Models Only. Don't Fit Stepside Bed Models..
  • CONDITION- New and High Quality. Material: Made of materials that meet or exceed OEM requirements. Color: Clear Lens+Black Housing. Design: LED Tube Style..
  • FEATURE- With these tail lights, your vehicle will go from unique and stylish. Not only will their lights keep you safer from all those distracted drivers on the road, but they'll also make you stand out from the boring factory style lights..
  • REPLACEMENT FOR- Vehicle Compatibility Reference Number：#19169004, 19169017, 19169018, 19169005, 19169018, GM2800186, GM2800174, GM2800186, GM2801186, GM2801174, GM2801186..
  • PACKAGE LISTING- 1 Pair of Tail Lights (Driver & Passenger Side). Instruction is NOT included..
Check Stock

CZC AUTO 12V Two Sided Magnetic Towing Light Kit for Trailer RV Boat Truck -Magnetic Strength 55 Pounds

  • Main Purpose: Works as a complete trailer tail light guard box set for your new or existing trailer, has stop turn tail lighting modes. Can be directly welded on or bolted on to the rear, side, bottom or top frame of your trailer..
  • Solid Built : Made of heavy duty steel, painted with quality black powder-coated finish, and pre-cut holes for 6” oval light, 2” round side light & license plate mounting. Durable for all weather elements..
  • Awesome Brightness: Use high-quality SMD LED, lights output excellent high brightness red light for stop turn light, low brightness for tail side marker light, greatly improving visibility and ensuring you a safer night..
  • Color Coded Wires: White wire with O ring terminal for ground, black wire for tail side marker light, red wire for stop turn light..
  • Simple Installation: All in a set and lights are mounted on the box. Just hardwire each pigtail wire to the corresponding wire on trailer. And then weld on or bolt on the light box to the trailer frame.
Check Stock