Reviews Single wing Clamps

Toolly 16 Pack Butt Welding Clamps - Small Welding Clamps Auto Body Panel Clamps for Edge to Edge Welding

  • Butt Welding Clamps includes 16 welding corner square welder clamps.
  • Used to make precision butt welds and edge-to-edge welds for patch repairs in floors, wings, door skins, fabricating, and re-skinning projects.
  • Use the Toolly Welding Square Clamp Set to pinch sheet metal panels level to each other.
  • While these metal clamps hold panels edge to edge with a 1mm gap, you can quickly weld the sheets together.
  • Each welding square tool pipe clamp can extend the clamp block to provide a .4-inch (1cm) tall gap.
  • Fits 3/16-inch to 26 gauge sheet metal materials.
  • Loosen the winged nut from the alignment screw then wedge two panels across from each other between the square body and the clamp block.
  • Tighten the winged nut to ensure a secure hold.
  • Use all 16 clamps for larger projects, then joint weld between them.
Check Stock

Toolly Butt Welding Clamps - Small Welding Clamps Auto Body Panel Clamps for Edge to Edge Welding, Pack of 16 (1 inch x 1 inch x 2.1inch)

  • 【Product Purpose】Butt welding clamps set includes 16 welding corner square welder clamps, which can be used to make precision butt welds and edge-to-edge welds for patch repairs in floors, wings, door skins, fabricating, and re-skinning projects. They are good accessories to help you to find the location quickly in repair work..
  • 【Perfectly Align Panels】Using the Toolly Welding Square Clamp Set to pinch sheet metal panels level to each other.
  • When these metal clamps hold panels edge-to-edge with a gap of 1mm, you can quickly weld the sheets together..
  • 【Applicable Types】Each welding square tool pipe clamp can extend the clamp block to provide a 4-inch (1cm) tall gap.
  • Fits 3/16-inch to 26 gauge sheet metal materials..
  • 【Easy To Use】Loosen the winged nut from the alignment screw and then wedge two panels across from each other between the square body and the clamp block.
  • Tighten the winged nut to make sure a firm fixation.
  • Use all 16 clamps for larger projects, then perform joint welding between them..
  • 【High Quality & Portable】These panel welding clamps are made of high quality matrial, which makes sure the durability and strength.
  • meanwhile, these clamps are in small size can be easily placed in your pocket or welding equipment tool bag..
Check Stock

ABN Butt Welding Clamps - 8 Piece Small Welding Clamps Auto Body Panel Clamps for Edge to Edge Welding

  • [Perfectly Align Panels] Use the ABN Welding Square Clamp Set to pinch sheet metal panels level to each other.
  • While these metal clamps hold panels edge to edge with a 1mm gap, you can quickly weld the sheets together.
  • [Fits your Project] Each welding square tool pipe clamp can extend the clamp block to provide a .4-inch (1cm) tall gap.
  • Fits 3/16-inch to 26 gauge sheet metal materials.
  • [Easy to Use] Loosen the winged nut from the alignment screw then wedge two panels across from each other between the square body and the clamp block.
  • Tighten the winged nut to ensure a secure hold.
  • Use all 8 clamps for larger projects, then joint weld between them.
  • [Built to Last] Panel welding clamps are constructed of zinc-plated steel to ensure maximum durability and strength while resisting rust.
  • [Contents] Welding accessories set includes 8 welding corner square welder clamps.
  • Used to make precision butt welds and edge-to-edge welds for patch repairs in floors, wings, door skins, fabricating, and re-skinning projects.
Check Stock

ATPEAM Butt Welding Clamp | Pack of 16 Small Welding Clamps Auto Body Panel Clamps for Edge to Edge Welding

  • Premium Material: Panel welding clamps are constructed of zinc-plated steel to ensure maximum durability and strength while resisting rust.
  • Fits your Project: Each welding square tool pipe clamp can extend the clamp block to provide a .4-inch (1cm) tall gap.
  • Fits 3/16-inch to 26 gauge sheet metal materials.
  • Good performance: These small welding clips can be completely fixed before butt welding, leaving only a small gap to make the weld completely penetrate. This is an ideal choice for professionals engaged in sheet metal body repair..
  • Easy to Use: Loosen the winged nut from the alignment screw then wedge two panels across from each other between the square body and the clamp block.
  • Tighten the winged nut to ensure a secure hold.
  • Use all 16 clamps for larger projects, then joint weld between them.
  • Package Included: Welding accessories set includes 16 welding corner square welder clamps.
  • Used to make precision butt welds and edge-to-edge welds for patch repairs in floors, wings, door skins, fabricating, and re-skinning projects.
Check Stock

QiiMii Stainless Steel 304 Heavy Duty Tri Clamp Clover Single Pin with Wing Nut for Ferrule TC 2 inch 10 pack

  • Tube OD: 2 Inch, Flange Size: 64MM, Fits 2 Inch Tri-clamp.
  • Type: stainless steel 304 Single pin heavy duty clamp with cross hole wing nut.
  • Fit for all other homebrew stuff sanitary fittings.
  • Free Bonus: Buy Clamps, Get Gasket For Free.
Check Stock

QiiMii 13MHHM Stainless Steel 304 Single Pin Heavy Duty Tri Clamp with Wing Nut for Ferrule TC 2 10 Pack 2 Inch

  • Type: stainless steel 304 single pin heavy duty clamp with cross hole wing nut.
  • Fit for all other homebrew stuff sanitary fittings.
  • Free Bonus: Buy Clamps, Get Gasket For Free.
Check Stock

GOVALVE Sanitary Stainless Steel Tri-Clamp - Heavy Duty Sanitary Clamp with Wing Nut for Ferrule TC (50.5mm) with Silicone Gaskets Pack of 2

  • Flange Size: 50.5MM. Fits to 1.5 inch sanitary tri-clamp tube..
  • Easy Tighten Thumb Screw: Single pin heavy duty clamp with cross hole wing nut. Easy to use and quick to assemble..
  • Corrosion Resistance: 304 stainless steel has strong oxidation resistance and does not corrode. Preventing rust processes for the whole body..
  • Heavy Duty Single Tri Clamp: Fits for all other home brew stuff sanitary fittings sanitary hose connections..
  • Package include: 2 pcs Clamps and 2 pcs silicone gaskets..
Check Stock

Keg Disconnect Ball Lock MFL Ball Lock Fittings Keg Connectors – Keg Coupler Stainless Ball Lock Keg Fittings 12-Piece

  • DISPENSE YOUR FAVORITE BEVERAGES: Use the G. Francis Ball Lock Keg Fitting Ball Locks 12-Piece Ball Lock Quick Disconnect Set with Liquid & Gas Disconnects, Swivel Nuts, & Hose Clamps to ferment and dispense craft cocktails, soda, and other beverages from your existing keg.
  • USE YOUR KEG: Each of the ball lock keg connectors (fittings) have an approximate 2.2-inch height and 1.3-inch outside diameter (5.6cm x 3.3cm) and is compatible with ball lock Cornelius (Corny) kegs and keg couple adapters for homebrewing.
  • Hose clamps have 0.2-inch to 0.5-inch (6-12mm) diameter while the barbed swivel nuts have 5/16-inch outside diameter (OD) fitted for 1/4-inch or 3/16-inch inside diameter (ID) hoses on your 3, 5, or 10 gallon keg.
  • BUILT TO LAST: Keg ball lock quick disconnects and hose clamp wings constructed from ABS plastic that resists rust and corrosion.
  • Swivel nuts and clamps constructed from food-grade stainless steel for maximum strength and longevity.
  • INSTALL EASILY: Tighten the swivel nut connecting the flare fitting before use.
  • Ensure correct fittings are installed on input and output posts – Light gray disconnect for gas inlet and black disconnect for fluid outlet.
Check Stock

Dubuque Clamp Works UC924 24″ Adjustable Bar Clamp for Woodworking – 4-PACK

  • Four (4) 24″ capacity Dubuque Clamp Works UC924 bar clamps.
  • Specifications: 1-3/8 x 7/8 in. notched bar with 1/8″ thick walls.
  • movable head has spring clutch for easy and secure adjustment.
  • fixed head features a 1/2″ acme-threaded screw and wing knob for final tightening.
  • Materials: bar made from heat-treated, extruded aluminum.
  • movable parts made from heat-treated cast 683 aluminum.
  • Design allows for single-handed operation. Clamp remains reliably straight under force — clamp your workpiece against it to prevent misalignment. Wood glues will not react with or adhere to aluminum — no staining on your workpiece, and easy clean-up!.
Check Stock

Dubuque Clamp Works UC936 36″ Adjustable Bar Clamp for Woodworking – 4-PACK

  • Four (4) 36″ capacity Dubuque Clamp Works UC936 bar clamps.
  • Specifications: 1-3/8 x 7/8 in. notched bar with 1/8″ thick walls.
  • movable head has spring clutch for easy and secure adjustment.
  • fixed head features a 1/2″ acme-threaded screw and wing knob for final tightening.
  • Materials: bar made from heat-treated, extruded aluminum.
  • movable parts made from heat-treated cast 683 aluminum.
  • Design allows for single-handed operation. Clamp remains reliably straight under force — clamp your workpiece against it to prevent misalignment. Wood glues will not react with or adhere to aluminum — no staining on your workpiece, and easy clean-up!.
Check Stock

PATACO 85Pcs 304 Single Ear Hose Clamps Stainless Steel,6-25.6mm Stepless Hose Clamps with Oetiker Clamps Plier and Gloves,Cinch Rings Crimp Hose Clamps Assortment Kit for Pipe,Plumbing,Automotive Use

  • ✅High quality - single ear hose clamps stainless steel made of 100% 304 stainless steel. The 304 stainless steel very sturdy, strong and reliable.
  • salt resistant, anti-rust, anti-corrosion, waterproof, oil-proof, heat resistance, oxidation resistance and mechanical properties. for long-term use..
  • ✅Clamps design - single ear hose clamps are flexible and ductile. 360 ° stepless design - there is no protrusion and gap in the inner, narrowband design providing a more concentrated sealing pressure. cochlear design ensures continuous clamping during temperature changes or machine vibrations, edge polished smooth, avoid damage to the hose. the clamping effect is obvious and stronger than that of the traditional screw type clamp..
  • ✅9 Popular clamp sizes – this single ear hose clamps stainless steel adjustable size range from 6 to 25.6mm, covers 9 sizes: 6-7mm, 7-8.7mm, 8.8-10.5mm, 10.3-12.8mm, 12.8-15.3mm, 15.3-18.5mm, 17.8-21.0mm, 20.3-23.5mm, 22.4mm-25.6mm. pataco radiator hose clamps are used in securing hoses, the hose of the car, home appliance line, machinery equipment, pipe, cable, tube, fuel lines. perfect to apply in automotive, industrial, boat/marine, shield, household, water line clamps, heater hose clamps,etc.
Check Stock

240pcs Single Ear Hose Clamps, 6-23.5mm Crimp Hose Clamps with Ear Clamp Pincer, Stainless Steel Single Ear Hose Clamps, Crimp Clamps Assortment Kit for Securing Pipe Hoses Plumbing

  • 【Crimping Tool Kit】- Single ear hose clamp set include 1pcs ear clamp pincer, 240pcs single ear hose clamps(30pcs each size), their size are: 6-7mm, 7-8.7mm, 8.8-10.5mm, 10.3-12.8mm, 12.8-15.3mm, 15.3-18.5mm, 17.8-21.0mm and 20.3-23.5mm, they are widely used to seal various types of hoses..
  • 【360° Seal Design】- Our PEX cinch clamps are made of high quality 304 stainless steel. Single ear hose clamps with smooth inner circumference have 360° good sealing and fastening state, special cochlear design provides a strong thermal expansion compensation function, which can makes the hoses always sealed regardless of the size change of the hose..
  • 【Ear Clamp Pincer】- Ear clamp pincer is made of Chrome vanadium steel with high frequency induction hardening, the max jaw opening size is 1 inch, it can be used to clamp single ear hose clamps and double ear hose clamps..
  • 【Easy to Use】- PEX cinch clamp fastening tool is easy to use. You just need to cut pipe, install PEX fitting/other pipe and crimp ring, use cinch tool tighten single ear hose clamp and the installation is complete..
Check Stock

Ear Hose Clamps Pincer, Ear Clamp Pliers Ear Hose Clamps Pincer Multipurpose Nail Puller Car Repair Tool for Securing Pipe Plumbing

  • EASY OPERATION: Ear Clamp Pliers are easy to operate, soft PVC handles for anti slip and comfort grip, convenient for using, save your time and energy..
  • PREMIUM MATERIAL: Made of high quality carbon steel material, high harrdness, rustproof, sturdy and durable, have a service time..
  • Replacement for: Pincer crimper tool is widely applied to single ear hose clamps, double ear clamps, stepless clamps and so on..
  • PURCHASE REFERENCE :PIncer crimper tool is widely applied to single ear hose clamps, double ear clamps, stepless clamps and so on..
  • SIMPLE OPERATION:HOse Clamp Crimper Tool is designed with soft PVC handle for non-slip, convenient and firmer grip during use, humanized design, comfortable grip, simple operation, saving your time and energy..
Check Stock