Reviews Single row Taper Roller Bearing

SKF DK59047 Cylindrical Roller Bearings

  • SKF cylindrical roller bearing with steel cage and removable inner ring suitable for high radial loads.
  • C3 radial clearance is larger than normal allowing for thermal expansion.
  • Single row roller bearing for high radial loads with low friction.
  • Removable inner ring in open bearing allows for lubrication in place.
Check Stock

FK Bearings COM12T 3/4 Spherical Bearing with Teflon Commercial Series, 1 Pack

  • Double row spherical roller bearing for applications that support radial and oscillating axial loads.
  • C3 radial clearance allows thermal expansion for continuous operating temperatures up to 200 degrees C/392 degrees F.
  • Tapered bore with 1:12 taper for compensating for a flexing shaft or fitting to a tapered shaft.
  • Roller-guided brass cage evenly spaces rollers for reduced friction, vibration, and noise.
  • Open design, circumferential groove and three lubrication holes in the outer ring allow for lubrication in place.
Check Stock

NU311 SNR New Cylindrical Roller Bearing

  • SKF cylindrical roller bearing with polyamide/nylon cage and removable inner ring suitable for high radial loads.
  • CN (normal) radial clearance for applications where thermal expansion is not a factor.
  • Single row roller bearing for high radial loads with low friction.
  • Removable inner ring in open bearing allows for lubrication in place.
  • Polyamide/nylon cage is lightweight and produces less noise and vibration than brass cages.
Check Stock

RNU205E Cylindrical Roller Bearing Harley Davidson 9135 Inner Primary Mainshaft

  • SKF cylindrical roller bearing with steel cage and removable inner ring suitable for high radial loads.
  • Metric unit measurements for industry consistency.
  • Single row roller bearing for high radial loads with low friction.
  • Removable inner ring in open bearing allows for lubrication in place.
Check Stock

NU1008 Cylindrical Roller Bearing 40x68x15 Cylindrical Bearings

  • SKF cylindrical roller bearing with polyamide/nylon cage and removable inner ring suitable for high radial loads.
  • Metric unit measurements for industry consistency.
  • Single row roller bearing for high radial loads with low friction.
  • Removable inner ring in open bearing allows for lubrication in place.
  • Polyamide/nylon cage is lightweight and produces less noise and vibration than brass cages.
Check Stock

INA SL045014 Cylindrical Roller Bearing Double Row Fixed Normal Clearance Open End Oil Hole Metric 70mm ID 110mm OD 54mm Width 3600rpm Maximum Rotational Speed 61000lbf Static Load Capacity 38500lbf Dynamic Load Capacity

  • INA cylindrical roller bearing with an open end ring suitable for high radial loads.
  • CN (normal) radial clearance for applications where thermal expansion is not a factor.
  • Double row roller bearing for higher radial loads than single row bearings.
  • Open bearing for lubrication applied in place.
  • Metric unit measurements for industry consistency.
Check Stock

NTN RA1562EBL - Cylindrical Roller Bearing - Straight Bore, 30 mm ID, 70 mm OD, 1.1875 in Width, C0 Internal Clearance

  • INA cylindrical roller bearing with a removable outer ring suitable for high radial loads.
  • CN (normal) radial clearance for applications where thermal expansion is not a factor.
  • Single row roller bearing for high radial loads with low friction.
  • Removable outer ring in open bearing allows for lubrication in place.
  • Metric unit measurements for industry consistency.
Check Stock

INA SL045018PP Cylindrical Roller Bearing, Double Row, Fixed, Normal Clearance, Open End, Double Sealed, Oil Hole, Metric, 90mm ID, 140mm OD, 67mm Width, 2800rpm Maximum Rotational Speed, 117000lbf Static Load Capacity, 70000lbf Dynamic Load Capacity

  • INA cylindrical roller bearing with an open end ring suitable for high radial loads.
  • CN (normal) radial clearance for applications where thermal expansion is not a factor.
  • Double row roller bearing for higher radial loads than single row bearings.
  • Open bearing for lubrication applied in place.
  • Metric unit measurements for industry consistency.
Check Stock

Timken 19150 Differential Bearing

  • INNER DIAMETER 1.5 INCH X OUTER DIAMETER 2.687 INCH X WIDTH 0.625 INCH.
Check Stock

Cone: A4050 & Race: A4138 Tapered Roller Bearing 0.5\ x 1.3775\ x 0.433\ (ID x OD x W) | 12.7 mm x 34.989 mm x 10.998 mm (ID x OD x W) - 2 Sets

  • ✔️ [Bearing Type] - Taper Roller Bearing: Cone A4050, Cup A4138.
  • ✔️ [Dimensions in Inches] - 0.5" (Inner Diameter) x 1.3775" (Outer Diameter) x 0.433" (Total Bearing Width).
  • ✔️ [Dimensions in Millimeter] - 12.7 mm (Inner Diameter) x 34.989 mm (Outer Diameter) x 10.998 mm (Total Bearing Width).
  • ✔️ [Cone & Cup Width] - Cone 10.988 mm / 0.4326" | Cup: 8.73 mm / 0.3437".
  • ✔️ [Quantity in Package] - 2 Set of Taper Roller Bearing (2 Cups & 2 Cones).
Check Stock

FAG N309E-TVP2-C3 Cylindrical Roller Bearing, Single Row, Straight Bore, Removable Outer Ring, High Capacity, C3 Clearance, Metric, 45mm ID, 100mm OD, 25mm Width

  • FAG cylindrical roller bearing with a removable outer ring suitable for high radial loads.
  • C3 radial clearance is larger than normal allowing for thermal expansion.
  • Single row roller bearing for high radial loads with low friction.
  • Removable outer ring in open bearing allows for lubrication in place.
  • Metric unit measurements for industry consistency.
Check Stock

SKF NU 2308 ECML Cylindrical Roller Bearing Single Row Removable Inner Ring Straight Bore High Capacity Normal Clearance Brass Cage Metric 40mm Bore 90mm OD 33mm Width

  • SKF cylindrical roller bearing with brass cage and removable inner ring suitable for high radial loads.
  • CN (normal) radial clearance for applications where thermal expansion is not a factor.
  • Single row roller bearing for high radial loads with low friction.
  • Removable inner ring in open bearing allows for lubrication in place.
  • Brass cage evenly spaces rollers for reduced friction, vibration, and noise.
Check Stock

SKF NU 215 ECM/C3 Cylindrical Roller Bearing, Single Row, Removable Inner Ring, Straight Bore, High Capacity, C3 Clearance, Brass Cage, Metric, 75mm Bore, 130mm OD, 25mm Width

  • SKF cylindrical roller bearing with brass cage and removable inner ring suitable for high radial loads.
  • CN (normal) radial clearance for applications where thermal expansion is not a factor.
  • Single row roller bearing for high radial loads with low friction.
  • Removable inner ring in open bearing allows for lubrication in place.
  • Brass cage evenly spaces rollers for reduced friction, vibration, and noise.
Check Stock