Reviews Single row Slewing Bearing

JTGBBD3 Heavy Duty Aluminum Lazy Susan Ball Bearing 6in 8in 18in 24in 32in, 360 Degree Rotating Swivel Plate, Quiet Lazy Susan Hardware Turntable Bearing (Size : 28 inches (700mm))

  • ❉ The silent slewing bearing adopts heavy-duty aluminum alloy materials and solid steel balls with strong load-bearing capacity.
  • ❉ The slewing ring runs smoothly and flexibly. Suitable for all types of table plates and table tops.
  • ❉ Turntable bearing, built-in mute bar, mute, stable rotation, easy to use.
  • ❉ The bearings are equipped with non-slip rubber feet. Non-slip, wear-resistant, stable.
  • ❉ The rotating base is easy to install, just fix the screws in the required position to complete the installation.
Check Stock

Double Layer Bearing Double Plate Bearing Goods Display Turntable TV Rack Desk Tool

  • Our slewing bearings have a variety of sizes for you to choose from: 12 inches/30cm, 16 inches/40cm, 20 inches/50cm, 24 inches/60cm, all the detailed dimensions are shown in the figure..
  • The front side is made of high-quality ABS plastic. The plastic ABS has excellent wear resistance, good dimensional stability and oil resistance..
  • The back is made of high-quality cold-rolled steel material, which is sturdy and durable. A neat row of bearing balls makes the turntable rotate more smoothly..
  • Wide range of applications: suitable for cake decoration, TV monitor stand, electronic repair, sculpture base, catering service, food display, service..
  • Note: If your turntable cannot rotate freely, you can try to apply some lubricant and synthetic spray lubricant to the side hole and the gap between the outer ring and the inner ring.
Check Stock

RLECS Swivel Plate 2PCS 4-Inch 360 Degree Hollow Square Lazy Susan Turntable Bearings Rotating Bearing Plate

  • The turntable is made of high-quality steel and the surface is painted black. It is rust-proof and durable. It is an ideal metal slewing bearing for kitchen cabinets, storage racks and process engineering..
  • The rotating plate can be installed on any object, such as a wooden base, a circular plate, a pallet or a box. Just install the rotating bearing on the board and it can rotate 360 degrees by itself..
  • Square rotary bearing, square, with ball raceway, easy to rotate, suitable for all objects, very suitable for round, square, pallet or box..
  • The size is 3.7x3.7inch square, the thickness is 5/16inch, and the maximum load capacity is 300lbs. It is suitable for small turntables with a diameter of 12-19 inches..
  • Can be used for kitchen spice organizing racks, corner cabinets, flower pots, turntable racks, makeup racks, desktop services and other rotating racks..
Check Stock

Newsfana Aluminum spacers Skates 8-Pack Spacers for 6mm Axles Spacers (Silver)

  • Inline Skate Bearing Spacers Material: Aluminum alloy, galvanized speed ring iron is specially molded into a dragon size.The gaskets are machined from high quality aluminum and meet specific standards. Aluminum Spacers This minimizes resistance to the bearings, and the sturdy aluminum construction eliminates the head and is more durable than other plastics! Skate bearing High quality, guaranteed service life!.
  • Aluminum Spacers This stepped gasket is suitable for conventional: Inline Aluminum Spacer aluminum shaft outer diameter: 7.9 mm inner diameter: 6.3 mm length: 23.5MM Size: 6.3MM X 7.9MM X 23.5MM. The bearing is located in the recessed part of the gasket and is provided with the wheel. Stepped Spacer Seamless integration. ( Package: 8 pack ).
  • Bearing Skate accessories Suitable for all standard size wheels, standard size 8mm bearings and standard size 6mm axles for standard size wheels and bearings. 6mm Axle Aluminum This minimizes resistance to bearings. The robust aluminum construction eliminates head and ratio Other plastics are more durable. Skate Wheel Bearing Installation: Place one bearing in the wheel. Install the gasket into the bearing in the wheel and insert the other bearing into the other side of the wheel..
Check Stock

SKF DK59047 Cylindrical Roller Bearings

  • SKF cylindrical roller bearing with steel cage and removable inner ring suitable for high radial loads.
  • C3 radial clearance is larger than normal allowing for thermal expansion.
  • Single row roller bearing for high radial loads with low friction.
  • Removable inner ring in open bearing allows for lubrication in place.
Check Stock

NU311 SNR New Cylindrical Roller Bearing

  • SKF cylindrical roller bearing with polyamide/nylon cage and removable inner ring suitable for high radial loads.
  • CN (normal) radial clearance for applications where thermal expansion is not a factor.
  • Single row roller bearing for high radial loads with low friction.
  • Removable inner ring in open bearing allows for lubrication in place.
  • Polyamide/nylon cage is lightweight and produces less noise and vibration than brass cages.
Check Stock

RNU205E Cylindrical Roller Bearing Harley Davidson 9135 Inner Primary Mainshaft

  • SKF cylindrical roller bearing with steel cage and removable inner ring suitable for high radial loads.
  • Metric unit measurements for industry consistency.
  • Single row roller bearing for high radial loads with low friction.
  • Removable inner ring in open bearing allows for lubrication in place.
Check Stock

NU1008 Cylindrical Roller Bearing 40x68x15 Cylindrical Bearings

  • SKF cylindrical roller bearing with polyamide/nylon cage and removable inner ring suitable for high radial loads.
  • Metric unit measurements for industry consistency.
  • Single row roller bearing for high radial loads with low friction.
  • Removable inner ring in open bearing allows for lubrication in place.
  • Polyamide/nylon cage is lightweight and produces less noise and vibration than brass cages.
Check Stock

SRC16 Sealmaster New Ball Bearing Cartridge Unit

  • Cartridge block with ball bearing insert for use with cylindrical bore housings.
  • Steel cartridge housing and single-row radial ball bearing for applications that support high radial loads.
  • Relubricatable solid one-piece cartridge housing for maximum strength and rigidity.
  • Fixed-type bearing with two set screws set apart at 120 degrees for secure attachment to a cylindrical shaft.
  • Felt labyrinth seal for protection against contaminants, and for less drag and heat generation than heavy contact seals.
Check Stock

INA SL045014 Cylindrical Roller Bearing Double Row Fixed Normal Clearance Open End Oil Hole Metric 70mm ID 110mm OD 54mm Width 3600rpm Maximum Rotational Speed 61000lbf Static Load Capacity 38500lbf Dynamic Load Capacity

  • INA cylindrical roller bearing with an open end ring suitable for high radial loads.
  • CN (normal) radial clearance for applications where thermal expansion is not a factor.
  • Double row roller bearing for higher radial loads than single row bearings.
  • Open bearing for lubrication applied in place.
  • Metric unit measurements for industry consistency.
Check Stock

Timken 19150 Differential Bearing

  • INNER DIAMETER 1.5 INCH X OUTER DIAMETER 2.687 INCH X WIDTH 0.625 INCH.
Check Stock

INA SL045018PP Cylindrical Roller Bearing, Double Row, Fixed, Normal Clearance, Open End, Double Sealed, Oil Hole, Metric, 90mm ID, 140mm OD, 67mm Width, 2800rpm Maximum Rotational Speed, 117000lbf Static Load Capacity, 70000lbf Dynamic Load Capacity

  • INA cylindrical roller bearing with an open end ring suitable for high radial loads.
  • CN (normal) radial clearance for applications where thermal expansion is not a factor.
  • Double row roller bearing for higher radial loads than single row bearings.
  • Open bearing for lubrication applied in place.
  • Metric unit measurements for industry consistency.
Check Stock

RLS5ZZ Shielded Bearing 5/8 x 1 9/16 x 7/16 inch Ball Bearings

  • Single-row, deep-groove ball bearing for applications supporting high speeds, moderately heavy radial loads, and thrust loads in both directions.
  • Small bearing for fitting small shaft diameters.
  • Metal shields on both sides of the bearing keep the lubricant in and contaminants out.
  • Pressed steel cage evenly spaces balls for reduced friction, vibration, and noise.
  • Normal radial internal clearance for applications where thermal expansion is not a factor.
Check Stock