Reviews Single double Sided Pcb

Miuzei PCB Board Prototype Kit for Electronic Projects Circuit Solder Double-Side Board with 40 Pin 2.54 mm Male to Female Headers Connector 2P&3P Screw Terminal Block Solder Flux Solder Wire

• ⭐【6 Different Sizes PCB Boards】Double Sided Prototype PCB Boards--1 × 9*7cm, 2 × 8*6cm, 5 × 8*2cm and 5× 7*5cm, 5 × 7*3cm, 5 × 5*4cm PCB....
• ⭐【Convenient for Projects】The upgrate 0.8mm....
• ⭐【Header Connector】6 pcs 40 pin Male Header, 4 pcs 40 pin Pitch Right Angle Male Headers, 6 pcs 40 Pin Female Header.
• ⭐【Screw Terminal Block】8 Pcs Screw Terminal Block: 6 pcs 5.08-301-2P and 6 pcs 5.08-301-3P.
• Pitch: 5.08mm, Rated Voltage: 300V, Rated Current:....
• ⭐【High Quality & Warranty】Durable Glass Fiber-FR4 Material (Thickness 1.6mm) is A Very Solid and Durable Prototype Circuit Board.

Portico II Master Buss Converter

• [EASY ADJUSTMENT] PT2399 + NE5532 continuously adjustable reverb and volume, with high performance and low noise..
• [OUTPUT INTERFACE] With 2 microphone outputs, mixed output and music signal output, with less interference..
• [EXCELLENT PCB] Using 1.6mm thick double sided PCB, spray tin process, ensure the good passage of large and small currents..
• [APPLICABLE DEVICE] Support mobile coils and computer electret microphones and most wireless microphones..
• [WIDE VOLTAGE RANGE] With DC12‑24V wide voltage range, suitable for more audio equipment, has strong practicability..

SFB-7900D - Sundown Audio Monoblock Class-D Amplifier

• Features: Double-sided SMT Epoxy PCB. Power Handling: 200 x 1 at 4-ohm | 350 x 1 at 2-ohm | 500 x 1 at 1-ohm. Painted Conformal Coating PCB Board, 1-Ohm Stable Circuit, Efficiency: 86% 4-Ohm at 100Hz, 12dB/Oct Variable Crossover Slope, Multi-way Protection Circuitry (Thermal/Over Current/Speaker Short/Speaker DC Protection), Input Sensitivity: 15V-0.5V, Variable Bass Boost: 0-9dB, Variable Low Pass Filter: 35Hz-160Hz, 10 Gauge Power Supply Connectors, Signal to Noise Ratio: >90dB, Damping Factor.

Gikfun DIY SMD SMT Welding Practice Soldering Skill Training Board NE555 CD4017 Water Flowing Led DIY Kit EK1885

• The circular circuit is the running water lamp circuit, which is composed of CD4017, NE555 and leds, which can be used to work after being welded..
• Add 2pcs of QFP44 chip, double sided component layout, double welding..
• High quality PCB, has clearly marked the electronics components, even beginners can easily solder successfully..
• Please make sure all components in right direction and right place.
• and check whether pseudo and float welding, this is very important in practicing....

DEYUE 40PCs PCB Double-Sided Prototyping PCBs Circuit Boards Kit | 5 Size Universal untraced Perforated Printed Circuits Boards | Solder-able Circuit Protoboards for DIY Soldering Electronic Projects

• 100 % SATISFACTION GUARANTED  ★  Excellent quality and an empty canvas for electrical enthusiasts! An easy soldering.
• 0.1" hole spacing for DIP integrated circuits and headers..
• THIS IS NOT YOUR NORMAL PERF BOARD!  ★  This board is much higher quality with plated-through-holes and annular rings that will not lift off the PCB under normal soldering conditions.
• MUTI-PURPOSE ★ General purpose prototyping circuit board for analog and digital use.
• Double sided board with plated-thru holes allows components to be easily soldered to either side of the board.
• THE FLEXIBILITY OF HAVINg CHOICES  ★  Great assortment with variety of size and perfect for quickly prototyping stackable circuits.
• PACKAGE COMPONENT  ★  40 Piece of double sided PCB prototype board in 5 different size (2x8 and 3x7 each 10 Pcs.
• 7x9 cm each 4 Pcs) with mounting holes or slots on each board corner.

GeeekPi Electronic Fun Kit,with 3PCS Half Sized Breadboard Cable Resistor LED Potentiometer for Electronic Learning Kit, Compatible with Arduino IDE, UNO R3, MEGA2560, Raspberry Pi Range(Black)

• This is an entry-level kit that contains DIY solderable PCB breadboards, male and female Pin headers, LED lights, resistor packages, and jumper packages..
• More than 200 pieces of components, compatible with Arduino IDE, Raspberry Pi and other microcontroller boards..
• 3PCS Proto Breadboard PCB Board Gold Plated Experimental Breadboard Soldering Board Double-Sided PCB.

Cermant 20PCS 15x18cm Bakelite Prototype Board PCB Printed Circuit Board for Soldering Electronics Project Experiment for Arduino DIY Electronics Experiments (5pcs 15x18cm)

• Pcb prototype board, the proto boards are in the color of Red.
• Material: 94HB Bakelite Prototyping Board.
• FEATURES - The proto boards are thick and single sided. The plated holes are pre-coppered and very solid which make them very easy to solder components on..
• PACKAGE CONTENT - 5pcs x Universal PCB Board.

CALCA 11.8\ x 328 FT DTF Transfer Film Roll DTF Transfer Paper Premium Roll PreTreat Sheet PET Heat Transfer Paper for DYI Direct Print on T-Shirts Textile -Double Sided

• CALCA 11.8" x 328 FT DTF Transfer Film Premium Roll-Double Sided Hot Peel.
• Instructions: - Sheet Size: 11.8" x 328 FT/30 cm x 100 m - Print side: Coated - Press time: 10 sec at 302 ℉.
• NOTE: This product needs DTF Inks and DTF Powder..
• Works on: - Suitable for DTF Inks and DTF Powder. - For use on cotton, polyester, blends, Tri-blends, leather, spandex, and more. - Can be used for dark and light fabric. - A Great soft hand feel..
• DTF transfer film is a hybrid Hot peel. This is a solution so versatile that gives you bright colors and is premium coated. You and your customers will be amazed and happy..
• Warm Tips: DTF Transfer Film, what is the Single sided? what is the Double sided? Single sided:Rough side is the printing side, back side is glossy. Double sided: Rough side is the printing side, back side is matte and anti-skid..
• Double sided:Front side for printing,printing side may be tested with clear Scotch tape pressing peeling for any white nano particles. Double sided flim feeding is more stable than single-sided feeding..

American Bass Amp D Class 1 Ohm Stable 4000 Watts Max

EZDIY-FAB PWM Fan Hub Controller/Splitter for 4-Pin & 3-Pin PC Cooling Fans, SATA Power, Only Use One MB Header

• Power up to 10 PC fans from a Single 4-Pin Motherboard PWM Fan Header.Note: Max current limit is 3A in total, check the spec of fan first..
• In the hub interfaces, the White interface of FAN1 is the CPU fan dedicated interface (with speed detection function). Since the mainboard can only receive one rotation speed signal, the remaining nine conventional fan interfaces have the PWM function, but no speed signal..
• There is EVA double-sided adhesive in the package, which can be easily affixed to a flat place. Also a fixing screw hole in the middle of the PCB to facilitate fixing to a part of the chassis..
• Direct computer power supply to reduce the mainboard loading pressure, and PWM temperature control line separated from mainboard to achieve both of power supply and temperature control..
• If 3-pin fans are connected to this fan hub, this fan hub CANNOT give them extra PWM function. They will run at FULL SPEED..

YaeCCC 110V Ultrasonic Cleaner Power Driver Board with 2PCS 50W 40K Transducers

• -The ultrasonic generator can monitor the power system frequency ultrasound power..
• -According to different requirements of users, real-time adjustment of various parameters: The power, amplitude, and running time..

Patriot Signature 4 GB PC3-10600 (1333 MHz) DDR3 Desktop Memory PSD34G13332

• Non-ECC Unbuffered 240-Pin 2 Rank Double-sided in-line memory module.
• PCB height: 1181(mil) and 1.5V Power Requirement.
• 100% Tested, RoHS Compliant, JEDEC Compliant.

RF Mixer, Low Noise Diode Passive Frequency Transducer Module for Phase Comparator for Demodulator

• Using 1.6mm thick PCB double sided board, sturdy and durable, come with long service life.
• The interior is composed of double balanced microwave diodes, come with high reliability.
• 35dB high isolation between local oscillator and RF input, which is stable and reliable.
• The product have large heat dissipation area, possess stable operation and long running time.
• The conversion loss is only 8.0dB, and the noise figure is as low as 8.0dB (SSB). This is a passive device and does not require power supply.