Reviews Single acting Cylinder

Enerpac - RC102 RC-102 Single-Acting Alloy Steel Hydraulic Cylinder with 10 Ton Capacity, Single Port, 2.13\ Stroke

  • Single-acting hydraulic cylinder with one port and pretensioned spring return of piston rod after 2.13" stroke.
  • Round body with single piston rod for use in general purpose applications in any position.
  • High-strength alloy steel with baked enamel finish for corrosion resistance.
  • 10-ton cylinder capacity for lifting or pushing.
  • Quick-connect CR-400 female coupler for connection to a CH-604 male coupler (sold separately).
Check Stock

Mophorn Hydraulic Pump 4 Quart Hydraulic Power Unit Double Acting Hydraulic Pump Unit with Steel Oil Tank 12V DC Hydraulic Pump for Dump Trailer Car Lifting (Steel,Double Acting)

  • Displacement of Hydraulic Pump: 0.825 GPM .Relief Valve Pressure: 22 MPA ( 3200 PSI Max. Relief Setting For Increased Lifting Power on A port ).
  • Single Acting Power-Up/Power-Down. Hand Held Pendant With About 15 Foot ( 4.5m) Removal Cord And Start Solenoid.
  • Application: This Hydraulic Power Unit Is Suitable For Control Of A Set Of Single-Acting Cylinder. Widely Used In Small Dump Truck, Hydraulic Winch, Etc..
  • Notice: A New Electronic Instruction Will Send To You Through Your E-mail Coming With The Order. Pls Feel Free To Contact Us When You Have Problems On Installation About That..
Check Stock

10 ton Ultra-Thin Hydraulic Lifting Cylinders Stroke 11 mm（0.44\） Hydraulic Cylinder Industrial Lifting Jack Ram Low Height

  • *Low height:10 ton Ultra-Thin Hydraulic Lifting Cylinders Stroke 11 mm（0.44"） provide the maximum power to height ratio. A compact, low height cylinder design is ideal for confined spaces where other cylinders will not fit.
  • *Stopping ring: protect the cylinder when the stroke get to top, absorbing heaviness from the other side.
  • *Plated steel plungers:hard chrome plated high quality steel plungers plunger avoid break ing when it is overloaded.
  • *Single-acting spring return: provides fast and complete retraction.
  • *Copper ring:high-standard copper welding, protected when the cylinder is loading.
Check Stock

20 ton Ultra-Thin Hydraulic Lifting Cylinders 20 Ton Stroke 0.52\ Hydraulic Cylinder Industrial Lifting Jack Ram Low Height

  • *Low height:20 ton Ultra-Thin Hydraulic Lifting Cylinders Stroke 13 mm（0.52"） provide the maximum power to height ratio. A compact, low height cylinder design is ideal for confined spaces where other cylinders will not fit..
  • *Stopping ring: protect the cylinder when the stroke get to top, absorbing heaviness from the other side.
  • *Plated steel plungers:hard chrome plated high quality steel plungers plunger avoid break ing when it is overloaded.
  • *Single-acting spring return: provides fast and complete retraction.
  • * Corrosion resistance:hard chrome plated high quality steel plungers and cylinder wall for increased corrosion resistance.
Check Stock

AMZCNC 20T Hydraulic Cylinder Jack Hollow Single Acting Hydraulic Ram Cylinder 2\(50mm) Hydraulic Lifting Cylinders (20T 2Inch Hollow)

  • 20 US Ton Capacity. 2" Stroke Hollow Hydraulic Cylinder Ram.
  • Connector Type: 3/8" NPT CR-400 quick hydraulic coupler with dust cap.
  • Max Pressure 10,000 PSI. Single acting - Pressure extend, Spring return..
  • Hard black oxide plated high carbon steel ram. Proprietary heat-treated steel shell..
  • This hydraulic jack cylinder has the advantages of small size, suitable for narrow space position. A great helper for riggers, fabricators, welders, and automotive body and frame shops in electric power, chemical industry, steel, Bridges, machinery, and other industries..
Check Stock

Baomain Pneumatic Air Cylinder SC 100 x 75 PT 1/2; Bore: 4\

  • Package Content: Cylinder + 4 PCS Fittings.
Check Stock

Pneumatic Air Cylinder, Double-Acting Cylinder 10mm Diameter 100mm Stroke Pressure 1Mpa Made of Stainless Steel

  • 【SPECIFICATION】 Fluid: Air, Type: Double-acting, Cylinder Diameter: 10mm, Stroke: 100mm, Pipe Size: M5 * 0.8, Pressure: 1Mpa.
  • 【MATERIAL】 The cylinder made of high quality stainless steel, the pneumatic cylinder has long service life.
  • 【FEATURE】 This is a double-acting cylinder which uses the force of air to move in both extend and retract strokes..
  • 【PRACTICAL】 Pneumatic cylinder is quieter, cleaner, and do not require large amounts of space for fluid storage.
  • 【SERVICE】 If you have any questions or need any suggestions about the products we have sold, please feel free to contact us, we will provide you with quality after-sales service..
Check Stock

Baomain Pneumatic Air Cylinder SC 32-200 32mm Bore 200mm Stroke Screwed Piston Rod Dual Action

  • Size : 45 x 45 x 344mm / 1.8" x 1.8" x 13.5" (L*W*H).
  • Package Includes: 1 x Air Cylinder, 2 x Fittings.
Check Stock

SurgeX SA-15 Standalone Surge Eliminator and Power Conditioner - Surge Protector with EMI/RFI Noise Filter 120 Volt 15 amp 2 Outlets

  • PA1500 - 10000 Psi treadle pump with 91.5 Cu In. reservoir.
  • H1010 - 10 Ton single acting cylinder with 10 In. stroke.
  • CS3814 - 1/4 In. internal diameter with 3/8 In. NPTF 6 Ft. hose.
  • GW4014 - 4 In. face diameter liquid gauge with 1/4 In. NPTF.
Check Stock

Maxim WSB Swivel Ball Welded Cylinder - Double Acting Hydraulic Cylinder 1.5” Bore x 12” Stroke, 0.75” Pin & 1” Rod Diameter, 19.25” Retracted, 3000 PSI, 5300 lb Column Load, SAE 6 Port Size, 10 lb

  • SPECIFICATIONS: This universal hydraulic cylinder is double-acting with a 1.5” bore, 12” stroke length, 0.75” pin and 1” rod diameter. 19.25” Retracted, 31.25” Extended. It offers a maximum working pressure of 3000 PSI, has 5300 lb column load capacity, and SAE 6 port size..
  • PRECISE PERFORMANCE: Our hydraulic cylinder delivers error-free performance in compact and mobile equipment. The heavy-duty piston seals rule out leaks for consistent performance in heavy load applications..
  • HIGHLY RELIABLE: This heavy-duty double-acting hydraulic cylinder with swivel ball mounts is superior in design compared to other hydraulic cylinders. It provides reliable performance in complex applications requiring up to 3000 PSI..
  • BUILT TO LAST: Our welded cylinder withstands high-temperature differences and is corrosion resistant. It has a compact and lightweight design and its welded barrels provide strength and stability to its form and functioning..
  • CUSTOMIZABLE: Our swivel ball hydraulic cylinder can be customized per OEM requirements. It offers 1-inch to 3 inches bore sizes and stroke lengths that can go up from 4 inches to 36 inches for greater convenience and faster action..
Check Stock

Maxim TC Double Acting Hydraulic Tie Rod Cylinder - 2 Bore Hydraulic Cylinder - Tie-Rod Cylinder for Double Acting Applications - 2” Bore, 6” Stroke, 2500 PSI, 16.25'' Retracted - 3/8 NPT Ports

  • SPECIFICATIONS: Maxim’s hydraulic cylinders has a 2” bore with 1” pin, 1.125” rod with a maximum stroke length of 6,” 3/8 " NPT Ports with 2500 PSI and column load of 7850 lbs. It measures 16.25” when retracted and 22.25” when fully extended..
  • HEAVY-DUTY: With a maximum working pressure of 2500 PSI and column load capacity of 7850 lbs, this tie-rod cylinder for double acting applications is made for rugged agricultural applications that require reliable and consistent performance..
  • EASY TO USE: Our double acting hydraulic cylinder has a simple but compact design that can be easily installed and disassembled. These tie-rod hydraulic cylinders are manufactured per strict NFPA standards and are interchangeable..
  • VERSATILE: This double action hydraulic cylinder is adaptable - it comes in customizable bore sizes from 2” to 4” and stroke lengths from 4” to 48”. Although made for rugged agricultural use, the tie-rod cylinder can be used in exacting applications..
  • LONG LASTING: Made from top-grade ductile iron with hard-polished chrome plating, this 6 stroke hydraulic cylinder is equipped with Buna N O-ring and zinc seals. It is durable and not susceptible to damage from wear and tear..
Check Stock

Baomain Pneumatic Air Cylinder SC 63 X 100 PT 3/8; Bore: 2 1/2 inch, Stroke: 4 inch; Screwed Piston Rod Dual Action

  • Overall Size : 7.5 x7.5 x 25cm / 2.9" x 2.9" x 9.8"(LWH).
Check Stock

Simlug Mini Air Pneumatic Cylinder, Cdj2B10-30B 10Mm Diameter 30Mm Stroke DoubleActing Stainless Steel Pneumatic Air Cylinder

  • The pneumatic actuator, The pneumatic cylinder is a mechanical devices which use the power of compressed gas to produce a force in a reciprocating linear motion..
  • The pneumatic air cylinder, Made of high quality stainless steel, the pneumatic cylinder has long service life..
  • This is a double-acting cylinder which uses the force of air to move in both extend and retract strokes..
  • It has 10mm cylinder diameter and 30mm stroke, the pressure is 0.15Mpa~1Mpa..
  • Pneumatic cylinder is quieter, cleaner, and do not require large amounts of space for fluid storage..
Check Stock