Reviews Single Mode Single Emitter
OBVIS IR Infrared Emitter Extender Cable Extension (10 Feet 3Meter) Single HeadEye 3.5mm
- IR emitter extension cable with single eye that is compatible with devices in 38khz(IMPORTANT).
- Plug into IR OUT port for use with infrared extender extension system, Xbox One, IR Connecting Blocks and Home Automation controllers.
- Comes with adhesive backing sticks directly onto different devices.
- Overall length of Infrared Emitter Extender: 10 feet (3 meter).
- Extend remote control ability to any room in the house, hidden Xbox One, AV receiver and other devices.
Check StockCMPLE - IR Emitter Extender Mini Stick-On Infrared Emitters Blink Eye, Remote Control Extension Cable 3.5mm 10 Feet
- Allows you to control A/V component by the existing IR controller, such as amplifier, cable box, HD DVR, stereo receiver, Satellite TV receiver, CD player, DVD player, Bluray player or other components which are controlled by IR signal.
- Passes IR communication: Used with an IR Repeater kit to control a device.
- Extend remote control ability to any room in the house.
- Two emitters on a single plug,Adhesive backing allows the emitter to be attached to the IR eye of a device.
- Dual Heads allow you to control multiple pieces of equipment with only one IR output, For use with Connecting Blocks and Home Automation controllers..
- The mini stick-on emitter includes a 10 ft cable between the emitter heads and the mini-plug.
Check StockKOLSOL Underground Cable Locator NF-820 Wire Locator Network Tester High & Low Voltage Cable Wire Locator
- [Wide Range] Mainly locate invisible buried wire, the depth range is 0-2m and cable length 1000m. single conductor, 2-core or multi-core cable are all available..
- [Endurable High Voltage] Tone trace live cable with triangle socket or alligator clip, Voltage range can be 0-220V without burnout, (400V is also endurable)..
- [Track with AC Filter] Easy to track cable with complete AC Interference Rejection..
- [Rechargable Battary] Both the emitter and the receiver are equipped with large capacity lithium battery (3.7V 1800mAh)..
- [Visual Sensitivity Indicator ] The emitter has a few sensitivity indicators, to help locate the wire much easier with the indicators strength and the tone together..
Check StockTNP IR Emitter Extender Extension Cable 10 Feet - 3.5mm Jack Infrared Red Transmitter Blaster Blink Eye Wire Cord Compatible with IR Repeater Extender System Kit Xbox One 1 IR Eye Emitter
- Passes IR communication: Used with an IR Repeater kit to control a device.
- Extend remote control ability to any room in the house.
- Adhesive backing allows the emitter to be attached to the IR eye of a device.
- Quad Heads allow you to control multiple pieces of equipment with only one IR output.
- For use with IR extender extension system, Xbox One, IR....
- The mini stick-on emitter includes a 10 ft cable between the emitter heads and the mini-plug.
- Allows you to control A/V component by the existing IR controller, such as amplifier, cable box, HD DVR, stereo receiver, Satellite TV receiver, CD....
Check StockNDS 430 Pop-Up Drainage Emitter with Elbow and Adapter for 3 in. & 4 in. Drain Pipes, works with drainage systems including catch basins, Green Plastic
- RELEASE WATER AWAY FROM PROPERTY: Water captured in your drainage system needs a point of release.
- and one of the best solutions for the job is the Pop-up Drainage Emitter.
- HOW IT WORKS: The pop-up emitter works at a low point of the drainage system to discharge water collected from upstream and help protect property from water damage.
- INSTALLATION: Connects to 3 in. & 4 in. single-wall corrugated and DWV/Sch. 40 pipes.
- remove adapter to connect to 3 in. sewer & drain and triple-wall pipes.
- Ensure cover flange is flush or slightly below adjacent turf to reduce potential for clipping cap with lawnmower.
- UNIQUE ARCHITECTURE: The pop-up emitter cover consists of the pop-up cap and wide flange design that prevents turf overgrowth.
- Underneath is an engineered crossbar design which helps maximize flow while flushing out debris.
- Molded-in crossbar geometry along with internal ribs provide exceptional durability..
- pops up as high as 1 in. once water pressure builds.
- closes as flow diminishes. Flat profile design reduces....
Check StockTNP IR Emitter Extender Extension Cable (10 Feet) - Quad 4 Head 3.5mm Jack Infrared Red Transmitter Blaster Blink Eye Wire Cord Compatible with IR Repeater Extender System Kit, Xbox One
- Passes IR communication: Used with an IR Repeater kit to control a device.
- Extend remote control ability to any room in the house.
- Adhesive backing allows the emitter to be attached to the IR eye of a device.
- Quad Heads allow you to control multiple pieces of equipment with only one IR output.
- For use with IR extender extension system, Xbox One, IR Connecting Blocks and Home Automation controllers.
- The mini stick-on emitter includes a 10 ft cable between the emitter heads and the mini-plug.
- Allows you to control A/V component by the existing IR controller, such as amplifier, cable box, HD DVR, stereo receiver, Satellite TV receiver, CD player, DVD player, Bluray player or other components which are controlled by IR signal.
Check StockCableRack 1 Meter LC to LC Single Mode Fiber 9/125 Fiber Patch Cable (5-Pack)
- Premium quality LC to LC single mode fiber patch cable for connecting singlemode optical networking devices in datacenter applications. Fiber patch cable single mode is immune to electrical interference and provides Ethernet connectivity up to 10GB. Single mode fiber cable is commonly used between LX and LH SFP optics for both 1GB and 10GB interconnects..
- Only Corning glass is used in CableRack brand singlemode fiber LC to LC fiber jumpers. You’ll find other sellers mistakenly referring to this cable at OS2, however this cable is actually OS1. OS2 is reserved for loose tube applications over bridges and between buildings. OS1 is for shorter lengths between network devices. The glass fiber insde OS1 and OS2, however is identical..
- All CableRack fiber optic patch cable LC to LC are fully tested and each package includes the output test results including insertion and DB loss, so you be sure your LC singlemode patch cable meets the highest quality standards. We carry LC single mode patch cables in a varienty of lengths and connector options in our Amazon store. Simply click on our brand name above to view all available products..
- Single mode LC to LC fiber patch cable solutions are critical to high speed network solutions in the datacenter. These ....
Check StockIR Emitter Extender Remote Control Transmitter 3.5mm to IR Extension Cable Triple Head Infrared Red Blaster Blink Eye Wire Cord Compatible with IR Repeater Extender System Kit, Xbox One (3 Head, 10FT)
- Allows you to control A/V component by the existing IR controller, such as amplifier, cable box, HD DVR, stereo receiver, Satellite TV receiver, CD player, DVD player, Bluray player or other components which are controlled by IR signal.
- Passes IR communication: Used with an IR Repeater kit to control a device.
- Extend remote control ability to any room in the house.
- Two emitters on a single plug,Adhesive backing allows the emitter to be attached to the IR eye of a device.
- Dual Heads allow you to control multiple pieces of equipment with only one IR output, For use with Connecting Blocks and Home Automation controllers..
- The mini stick-on emitter includes a 10 ft cable between the emitter heads and the mini-plug.
Check StockSureFire Fury DFT 1500 Lumen Tactical Single-Output LED Flashlight Bundle with 4 Extra CR123A Batteries and Lightjunction Battery Case
- Virtually indestructible LED emitter regulated to maximize light output and runtime.
- Single high output level of 1,500 lumens on one 18650 lithium-ion rechargeable battery, strong enough to also serve as a searchlight.
- Dual fuel light powered by either two 123A lithium batteries or a single 18650 lithium-ion rechargeable battery.
- Press tailcap slightly for momentary-on, or fully press or click for constant-on.
- Includes 4 extra Surefire CR123A batteries (One SF18650B Factory Installed) and Lightjunction battery box.
Check StockIR Extender Infrared Remote Control Repeater Emitter Stick-On Mini Receiver Transmitter IR Blaster Extension Cable for TV/DVD/DVR/CD Player/Bluray Player (Single Heads, 10FT Long)
- Allows you to control A/V component by the existing IR controller, such as amplifier, cable box, HD DVR, stereo receiver, Satellite TV receiver, CD player, DVD player, Bluray player or other components which are controlled by IR signal. NOTE: Your device must have 'IR' port so the product could work!.
- Passes IR communication: Used with an IR Repeater kit to remote control a device, extending remote control ability to any room in the house. NOTE: Your device must have 'IR' port so the product could work!.
- Two emitters on a single plug, adhesive backing allows the emitter to be easily attached to the IR eye of your device..
- Multiple heads optional allows you to control multiple pieces of equipment with only one IR output, For use with Connecting Blocks and Home Automation controllers..
- The mini stick-on infrared emitter includes a 10 ft cable between the emitter heads and the mini-plug, easily meet your expectation of extending..
Check StockWenkeDigi IR Infrared Over HDMI Remote Control Repeater kit Work with A/V equipments Out of Sight Like TV DVD Sky Set-top Box air Conditioner Including CEC HDMI adapters
- Technical Information-Impedance-470 Ohm: Interfaces/Ports-Ports-1 x Output, 4 x Input:.
- Connects 4 emitter ports and power supply to all Xantech IR receivers and keypads.
- 4 parallel emitter ports with 470W resistors drive 4 single or 4 dual emitters quick-connect stereo mini jack for Xantech infrared receivers that use....
Check StockAGPtek LKV372A 60m/190ft 1080P HD HDMI Network Extender Over Single Cat6/6a/7 Ethernet Cable with IR Remote Control
- 【1080P Transmission】-- This HDMI extender supports 1080P HD, HD Audio, 3D.
- It extends HDMI 1080P AV signal to at least 190ft/60m via single cat6....
- 【HDMI Lossless transmission】-- It extends HDMI AV signal to synchronous output Video display is as fluent as direct connection,Adjust the....
- 【Pure Hardware Transmission】-- It is pure hardware design,No driver needed, plug and play. Adopt full HD transmission technology to make the video....
- 【IR Remote Control】-- Support 20~60KHz wide Frequency IR signal transmission for controlling the source device, IR Emitter Cable and IR Receiver....
- 【Installation Requirements】-- Requires one single cat6/6A/7 cable to connect TX and RX side. Suitable for HDMI source device(computer graphics....
Check StockWenkeDigi IR Infrared Repeater System kit, IR Repeater Extender, Max 100 Feet Efficient Receiver Range - IR Remote Control Hidden Devices -10 Feet IR Receiver Cable (Can Run 400 Feet by Your Cat5e)
- This IR kit is a device that only passes on the infrared signal . It is used to control Four (4) IR devices out of sight that are kept in a closed cabinet or in anther room ( expandable up to 18, and 4 x single emitter provided in the package , Additional IR Emitters sold separately, One emitter one device ) . Strong Compatibly , It is compatible with almost all the IR electronic appliances like SKY STB and CISCO DVD player , SONY receivers ,Amplifier, Xbox, TV , Blu-ray player,etc with its wide frequency range 20 KHz to 60KHz ..
- Mini Block Size , Dual Sensors Mini Bar IR receiver , One Sensor 38KHz , the Other 56KHz, with long effective remote control distance up to 100 FEET @38KHz and 23 FEET at 56KHz , High sensitivity, Real time transmission without any delay . It allows you to control your home theater with your existing IR remote controller. NOTE : NOT support RF and Bluetooth Remote Control ..
- This IR Repeater system kit supplies with an ideal solution for those who want to conceal their A/V components equipment inside a entertainment system cabinet or closet door for a clean, stylish look. It makes it possible to control multiple IR devices while these are in a closed cupboard or in a remote location out of sight ..
Check Stock