Reviews Single Direct Drive Fans

Veris,Current Switch,SolidCore,Fxd,N.O,250V, H800-HV

  • Hawkeye 800 go/no go current switches provide a cost-effective solution for monitoring status on unit vents, exhaust fans, recirculation pumps, and other fixed loads where belt loss is not a concern.
  • APPLICATIONS Monitoring on/off status of electrical loads Monitoring direct-drive units, exhaust fans, and other fixed loads Verifying lighting run times On/off status for direct-drive fans, pumps, and process motors More reliable for status than relays across auxiliary contacts Ideal for direct-drive units, unit vents, fan coil units, exhaust fans, and other fixed loads Great for lighting status less expensive than 277V relays Removable mounting bracket provides installation flexibility.
  • saves valuable panel space100% solid-state, no moving parts to failPolarity insensitive output5-year limited warranty.
Check Stock

Dual Electric Cooling Fan Wire Harness Kit 185 On 165 Off Thermostat 50 AMP Relay NEW

  • COMES ON AT 185 degrees AND TURNS OFF AT 165 degrees ..
  • Works for: 2 x 8 inch Fans 2 x 10 Inch Fans 2 x 12 Inch Fans 2 x 14 Inch Fans Single 8 Inch Fan Single 10 Inch Fan Single 12 Inch Fan Single 14 Inch Fan Single 16 Inch Fan (Two 16 inch fans, need 2 Relay Kits).
  • Included in this Relay kit: 185 Degree Thermostat Switch 1 Relay Wire Harness 1 3/8″ NPT Thread-In Probe 2 Ring Terminals 2 Fan Pigtail Connectors Included 1 Fuse Holder 3/8″ to 1/2″ Adapter 30 & 40 amp Fuses,English instruction.
Check Stock

ZVS Tesla Coil Flyback Driver/Marx Generator/Jacob'ladder Ignition Coil 12-36V

  • Voltage of the input voltage of about 1000 times.
  • A flyback drive circuit, which is used to drive the ignition coil, as did the Zero Voltage Switching, masses of fans called them “ZVS circuit”. Because of its big power, low heat, simple and reliable by fans are widely used in the drive spark gap tesla c.
Check Stock

CORSAIR Crystal 460X Compact Mid-Tower Case, Red LED Fan, Tempered Glass - Black

  • Beautiful two-panel tempered glass displays every component of your build / clean, modern lines with an all steel exterior.
  • Compact Mid tower design fits full-sized ATX boards and multiple Graphics card configurations / direct Air flow access to the hottest components with No Drive cages in the way.
  • Capable liquid cooling support for both CPU and GPU loops / included AF140L and AF120L fans for excellent performance and Low noise levels.
  • Full dust filtration on bottom, front, and top / tons of cable-routing options and tie downs so cables can be easily tucked out of the way.
  • Tool-free Drive Installation for quick builds / front radiator compatibility for up to a single 360mm radiator or multiple 120/140mm radiators.
  • Compatible Corsair Liquid Coolers - H55, H60, H75, H80i, H90, H100i, H105, H110.
Check Stock

Juki DDL550 LockStitch Industrial Sewing Machine Table,servo Motor,lamp,Made in Japan DIY

  • Specifications SPEED: 200-3700 spm MAX STITCH LENGTH: 5mm MAX PRESSER FOOT LIFT: 10-13mm LUBRICATION TYPE: Automatic (oil bath type) NEEDLE TYPE:DBX1 #11~#14.
  • Siruba's newest lockstitch plain machine is a smooth, quiet, power efficient industrial straight stitch Plainsewer 003e DIRECT-DRIVE NEEDLE POSITIONING LOCKSTITCH MACHINE. 003e MECHATRONIC INTEGRATION WITH BUILT-IN CONTROL BOX AND CONTROL PANEL. IT IS EASY TO INSTALL AND OPERATE. 003e DIRECT-DRIVE SERVO MOTOR (110Volts) IS SPEEDY, ACCURATE, AND ENERGY-SAVING THAN CLUTCH MOTOR BY 60%. 003e USER FRIENDLY: EQUIPPED WITH LED LIGHT, BUILT-IN BOBBIN WINDER, AND HALF STITCH FUNCTION..
  • Product Type Direct-Drive Needle Positioning Lockstitch Machine WHAT'S IN THE BOX : SIRUBA DL720-M1 machine head + TABLE STAND PLEASE NOTE! WILL BE DELIVERED UNASSEMBLED, will be delivered in 2 boxes, no detailed instructions for assembly. Highly Recommended to have a sewing technician to set up the machine..
  • The Presser Feet are compatible with VIRTUALLY ALL High-Shank, Single-Needle Industrial Sewing Machines, including:JUKI Style INDUSTRIAL Single Needle (DDL-8300 8500 8700 AND OTHERS) Sewing Machines ARTISAN BROTHER CONSEW COLUMBIA JUKI MITSUBISHI NAKAJIMA REX SINGER TAIKO..
Check Stock

Gibraltar 6711DD 6700 Series Direct Drive Single Pedal

  • 90 gram dual surface black & chrome beater.
Check Stock

PRINCE CASTLE Drive Motor Assembly 87-028AS

  • ATO 110v vfd, single phase 110v/120v input, single phase or three phase 220v output, achieve to run 220v AC motor on single phase 110v/120v power supply.
  • 【Voltage& Frequency】Input voltage: 1 phase 120V AC ±15%, Input frequency: 50Hz/60Hz,Output voltage: 1 phase or 3 phase 220V AC ±15%, Output frequency: 0.00~400.00Hz.
  • 【APPLICATION】ATO 7.5 hp 5.5kW variable frequency drive Can be widely applied to drive the AC motor, such as fans, pumps, power tools, etc.
  • 【TIPS】 To protect the variable frequency drive and Motor, you need an upstream protection, add a line-choke upstream the VFD, this will reduce the current transients seen by the input of the VFD.
  • 【CUSTOMER FIRST】If you have no experience in driving a VFD, be sure to refer to the instructions before operating a VFD.If you are not sure about the size or have any issue about the product or service, please don't hesitate to email us. We will answer you within 12h.
Check Stock

StarTech.com 4 Bay USB 3.0 (5 Gbps) Hard Drive Docking Station w/UASP for 2.5" & 3.5" SATA SSD HDD - Multiple External Hard Drive Cloner/Copier Dock (SDOCK4U33)

  • ...u will experience a hassle-free operation with this hard drive duplicator dock. It features independent SATA controllers allowing for uninterrupted data transfers while hot-swapping the other drives.
  • MULTIPLE HARD DRIVE DUPLICATOR DOCK: Connect and swap four 2.5 / 3.5” SATA HDD/SSD drives simultaneously through a single USB port with this 4 bay external hard drive cloner.
  • Hard Drive Dock / Four Bay Dock / Hard Drive Docking Station / SATA Dock / Hard Drive Docking Station with UASP / SATA HDD Docking Station / Hot Swap Hard Drive Dock.
  • EXPERIENCE HIGH PERFORMANCE: This USB 3.0 to SATA hard drive docking station supports SATA III (6 Gbps) and UASP for optimal performance.
Check Stock

Data Strategy: How to Profit from a World of Big Data, Analytics and Artificial Intelligence

  • ADVANCED ALL-FLASH HYBRID SLC-QLC IN A SINGLE M.2 FORM FACTOR: This unique hybrid SLC-QLC SSD uses 24GB of SLC, the fastest and most durable NAND available, as primary storage for direct read/write access by our smart NVMe software. This is a new type of Direct Access SLC plus QLC on the same device. Don’t confuse this with traditional QLC SSDs, which use dynamic SLC only to cache the QLC..
  • REDEFINING GAMING PERFORMANCE: AI based smart SLC direct access technology ensures that you and your applications experience consistent and smooth performance as your drive fills up. Many traditional QLC SSDs can slow down game loads to as much as 1/3rd of their original performance as they fill up. Not this one..
  • EXTREME ENDURANCE: Artificial Intelligence maintains performance and endurance over the life of the product by keeping active data and writes on the SLC part of the device. FuzeDrive Gold has 750 TBW and a 5-year warranty. That’s up to 4 times better than many traditional QLC SSDs. It’s built to withstand video editing, 3D-rendering tasks and high-performance gaming..
  • FUZION TOOLS: Analyze your system and auto-install the AI drivers. Monitor life expectancy, Monitor drive health and Update firmware.
  • IMMEDIATE ACCESS TO ALL YOUR GAMES WITH FUZION-X: Fuz....
Check Stock

Creality CR-10 V3 3D Printer New Version with Titan Direct Drive Silent Motherboard Installed and MeanWell Power Supply Large Build Volume 300x300x400mm

  • Titan Direct Drive: The direct extruder is right above the hot end with little space in between, which enables the extruder to push the filament....
  • Dual Part Cooling Fans Extruder: Two part cooling fans are installed on the two sides of the hotend. This can promote to dissipate heat and cool down....
  • Upgraded Silent Motherboard: CR-10 V3 has adopted industrial self-developed motherboard backed by TMC2208 ultra silent driver. It demonstrates firm....
  • All Metal Frame and Triangle Stable Structure : It adopts all metal frame and the high quality V-profile structure , forms a firm golden triangle that....
  • 24V/350W Meanwell Power Supply: Equipped with solid 24V/350W Meanwell power supply pairs with thermally efficient bed heater. It allows for rapid....
Check Stock

Dyson V7 Motorhead Cordless Vacuum Cleaner + Direct Drive Cleaner Head + Wand Set + Combination Tool + Crevice Tool

  • Direct Drive Cleaner Head – Easily Accesses Dirt and Grime Trapped Deep inside Carpets while still Managing to Remove Dust from Hard Floors.
  • 2 Tier Radial Cyclones – 15 Cyclones Arranged Across two Tiers which work in Parallel to Increase Airflow and Capture Fine Dust.
  • The Center of Gravity is Located Towards the Grip for Easy, Lightweight Cleaning Up Top, Down Below and In-Between Places, Things and Areas.
  • Hygienic Dirt Ejector – Pulling up on the Red Tab Empties Dust from the Bin in a Single Action.
  • Includes – Direct Drive Cleaner Head, Electric Wand Set, Docking Station, Combination Accessory Tool, Crevice Tool and Manuals.
Check Stock

HiLetgo 3pcs LM393 Rain Drops Sensor Weather Moisture Monitor Sensor Humidity Sensitivity Module Nickeled Plate 3.3-5V for Arduino

  • The sensor uses high quality FR-04 double-sided materials, large area of 5.0 * 4.0CM, and nickel-plated surface, with oxidation resistance,....
  • Comparator output, the signal clean, good waveform, strong driving ability, more than 15mA.
  • The raindrop board and the control board are separate, easy to lead the line.
  • TTL level output, TTL output valid signal is low. Drive capacity of about 100MA, direct drive relays, buzzers, small fans, and so on..
Check Stock

Restaurant Canopy Hood Grease Rated Exhaust Fan- High Speed Direct Drive Centrifugal Upblast Exhaust Fan with speed control- 24 3/4" Base, 0.75 HP 115 Volt Single Phase Motor, 1500-2200 CFM (DU85HFA)

  • High Speed Direct Drive Centrifugal Upblast Exhaust Fan with speed control, disconnect switch and 15-3/4" wheel..
  • 24 3/4" x 24 3/4" Fan Base Dimension/ 103 LBs/ 1500-2200 CFM/ 0.75 HP 115 volt Single Phase Motor..
  • Rated for restaurant grease and general ventilation applications. UL705, UL762, & ULC-S645 Rated. Included with the exhaust fan is a restaurant duty grease cup, down spout, and a hinge kit for exhaust fan roof curbs..
  • Construction features include a heavy gauge aluminum housing, a backward inclined, non-overloading wheel, a safety disconnect switch, a variable speed control, vibration isolators, and quick release latches for motor compartment access..
  • As all fans are custom built, no returns or exchanges are accepted..
Check Stock