Reviews Simcom 300 Module

HiLetgo Smallest SIM800L GPRS GSM Breakout Module Quad-Band 850/900/1800/1900MHz SIM Card Slot Onboard with Antenna 3.7~4.2V

  • Mini GSM / GPRS breakout board is based on SIM800L module, supports quad-band GSM/GPRS network, available for GPRS and SMS message data remote transmission..
  • The board features compact size and low current consumption. With power saving technique, the current consumption is as low as 1mA in sleep mode..
  • It communicates with microcontroller via UART port, supports command including 3GPP TS 27.007, 27.005 and SIMCOM enhanced AT Commands..
  • AT command interface with "auto baud" detection..
  • TTL serial port for serial port, you can link directly to the microcontroller.
Check Stock

RedTagCanada SIM900 Quad Band GSM GPRS Quad-Band Modules 2G Shield Development Board for R3 Mega with Antenna for Arduino SCM & DIY Kits

  • This is a new version (64M version), SMS support MMS: Multimedia message and Short Message Service - so it is possible to send small amounts of data over the network (ASCII or raw hexadecimal).
  • The shield allows you to get SMS, MMS, GPRS and audio via UART by sending AT commands (GSM 07.07, 07.05 and SIMCOM enhanced to commands). The shield also has the 12 GPIOs, 2 PWMs and an ADC of the SIM900 module (They are all 2V8 logic) present on board..
  • Application: M2M (Machine 2 Machine) Applications.Remote control of appliances.Remote Weather Station or Wireless Sensor Network.Vehicle tracking system with a GPS module.Good to learn GSM / GPRS mobile phone development, control development of remote equipment, wireless meter reading, smart appliances, ultra long distance control, etc..
  • Control via AT commands - Standard Commands: GSM 07.07 & 07.05 | Enhanced.
  • Power jack - connected to external 4.8~5VDC power supply, Antenna interface - connected to external antenna, Serial port select - select either software serial port or hardware serial port to be connected to GPRS Shield.
Check Stock

Development Board Module Kit Fit for 850/900/1800/1900 MHz GPRS/GSM Antenna, 5~26V

  • ...00/ 1800 / 1900 MHz - would work on GSM networks in all countries across the world..
  • GPRS multi-slot class 10/8. GPRS mobile station class B. Compliant to GSM phase 2/2+. Class 4 (2 W @ 850 / 900 MHz). Class 1 (1 W @ 1800 / 1900MHz). Control via AT commands - Standard Commands: GSM 07.07 & 07.05 | Enhanced Commands: SIMCOM AT Commands. Short Message Service - so that you can send small amounts of data over the network (ASCII or hexadecimal)..
Check Stock

Ingcool GSM/GPRS/GNSS Bluetooth HAT Expansion Board for Raspberry Pi 4B/ 3B+/ 3B/ 2B/ Zero W/ Zero, Based on SIM868 Module Supports SMS, Phone Call, Global Position, Transfer Data, etc.

  • Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards.
  • Supports SMS, phone call, GPRS, DTMF, HTTP, FTP, MMS, email, etc. Support GPS, COMPASS, Glonass, LBS base station positioning, omni-positioning. Bluetooth 3.0, supports data transferring through Bluetooth.
  • SIM card slot for 1.8V/3V SIM card, Supports SIM application toolkit: GSM 11.14 Release 99.
  • Baudrate auto detection (1200bps ~115200bps). Onboard USB TO UART converter for UART debugging. 6x LEDs for indicating the module working status. RTC with backup battery holder.
  • Control via AT commands (3GPP TS 27.007, 27.005, and SIMCOM enhanced AT Commands). Comes with development resources and manual (examples for Raspberry Pi/Arduino/STM32).
Check Stock

Module,Development Board Module Kit,5~26V SIM Development Module,Fit for SIM900 850/900/1800/1900 MHz GPRS/GSM,Quad-Band 850/900/ 1800/1900 MHz - Would Work on GSM Networks

  • .../ 900/ 1800 / 1900 MHz - would work on GSM networks in all countries across the world..
  • GPRS multi-slot class 10/8.GPRS mobile station class B. Compliant to GSM phase 2/2+. Class 4 (2 W @ 850 / 900 MHz).Class 1 (1 W @ 1800 / 1900MHz).Control via AT commands - Standard Commands: GSM 07.07 & 07.05 | Enhanced Commands: SIMCOM AT Commands..
  • Short Message Service - so that you can send small amounts of data over the network (ASCII or raw hexadecimal).Embedded TCP/UDP stack - allows you to upload data to a web server.RTC supported.Selectable serial port.Low power consumption - 1.5mA(sleep mode)..
Check Stock

BLUETTI B300 3072Wh Expansion Battery for AC300/AC200MAX/AC200P/EB240/EB150, Expand AC300 w/ 4 Extra Battery,Portable Power Station w/ 100W USB-C & DC12V Emergency Power Backup for Home Van Outdoor Camp

  • [Extra 3072Wh Capacity]-The overall capacity of AC300 can reach up to 12,288Wh by connecting with 4*B300 modules, It is also compatible with BLUETTI AC200MAX/AC200P/EB240/EB150/EP500.
  • [Far More Than a Extra Battery] - Bluetti B300 battery module is not just an expandable battery pack, It can also be used as an independent high efficiency giant power bank. The B300 features with 1 100W USB-C, 1 12V/10A car output and a 18W USB-A ports, you can connect all your essential USB and DC devices directly to the B300..
  • [LiFePO4 Cell Give You Peace of Mind] - The B300 solar generator use top-of-the-range LFP battery cells which is famous for its superior stability and security, boasting up to life cycles 3,500+ to 80% or 6000+ to 50% . An incredible long-lasting power station..
  • [Independent Charging Capabilities] - Bluetti B300 battery module can be charged independently from the main solar generator, solar, AC, car, lead-acid battery, you can feed it up in 5 hours by 700W Max dual charging(dual PV or PV + AC adapter), The car / lead-acid battery and & solar recharging need a D050S.
  • [What You Get] - BLUETTI B300 module, Battery expansion cable, Solar charging cable, User manual, 48-month warranty, and friendly local customer service..
Check Stock

Opto 22 SNAP-PAC-RCK16 - SNAP PAC 16-Module Mounting Rack

  • DIN Rail mount 30Amp 300V 2x12 position screw terminal block distribution module. Support for multiple module extension connections..
  • A / B position maximum current 30Amp(each position). A1~A12 total maximum current 30Amp(total positions). B1~B12 total maximum current 30Amp(total positions). A1~A12 / B1~B12 position maximum current 20Amp(each position). Maximum voltage 300V..
Check Stock

YIHAM 7629 Electronic Igniter for Weber Genesis 300 E-310 E-320 E-330 S-310 S-330 CEP-310 6511001 6511301 2011-2016 Weber Igniter Replacement 88826 66836 1836-13 KW629

  • 【Fits Weber Genesis 300 Grill 】Weber genesis s-330 igniter , Weber s310 igniter , Weber genesis e310 igniter kit, Weber ep330 igniter ( 2011-2016....
  • 【Fits Weber Genesis 300 Grill 】Fits Weber Genesis E310, E320, E330, EP310, EP320, EP330, S310, S330, CEP310, CEP320, CEP330 2011-2016 Model Years..
  • 【Fits Weber Genesis 300 Grill 】Fits Weber grill models 56514, 6511001, 6511301, 6512001, 6519009, 6519399, 6522301, 6531001, 6532001, 6532301,....
  • 【Product Information】Grill Igniter Kit 4 Outlets. Compatible with 1836-13 Weber igniter ( 66836 40277202 igniter button + 88826 igniter module....
  • 【Package Includes】1 igniter module, 1 igniter button, 4 igniter electrode, 4 wires, 4 wire clips, 4 screws, 4 stainless steel gaskets, 4 plastic....
Check Stock

DROK DC 24V to 12V CC CV Step Down Volts Regulator Constant Current Voltage 8A DC Adjustable Buck Converter 7-40V to 1.2-35V LED Driver Charger Module with Charging Indicator Solar Power Supply DIY

  • Module Properties: non-isolated step-down constant current , constant voltage module (CC CV) charging module.
  • Output voltage :DC 1.2-35V continuously adjustable.
  • Output Current: 8A ( when power tube's temperature exceeds 65 degrees, please add cooling fan ).
  • Constant current range :0.2-8A ( adjustable ).
  • Input 24V Output 12V 5A ripple around 50mV ( excluding noise ).
  • Application: High-power LED constant current driver, rechargeable lithium batteries (including ferroelectric), 4V, 6V, 12V, 14V, 24V rechargeable batteries, nickel-cadmium nickel-metal hydride batteries (battery pack) charging, solar panels, wind turbines.
Check Stock

Honeywell LYNX Touch 5210 4.3\ All-in-One Wireless Home and Business Alarm Control System

  • WiFi & ZWAVE Compatible (SOLD SEPARATELY - NOT INCLUDED).
  • L5210 All-In-One Home and Business Control System.
  • Integrated Z-Wave Support via L5100-ZWAVE Z-Wave Control Module for L5210 (SOLD SEPARATELY - NOT INCLUDED)    Up to three thermostats (HVAC system or battery powered) with 1°F and 0.5°C set points Four door locks – Jammed locks reported to Honeywell Total Connect Remote Services 40 devices such as lights, switches and lamp modules 20 scenes 20 rules or event-based actions 20 schedules or time-based actions Sunrise/sunset lighting control Randomized lighting control.
  • Wi-Fi via L5100-WIFI Wi-Fi IP Communication Module for L5210 (SOLD SEPARATELY - NOT INCLUDED)    IEEE 802.11 B/G/N radio Supports alarm reporting Supports two-way voice LYNX Connect app supports up to four mobile iOS and Android devices.
  • Honeywell 3GL Communications GSM radio (SOLD SEPARATELY - NOT INCLUDED) – protocol supports AT&T and Rogers networks ADEMCO Contact ID Reporting (four or ten digit account numbers) SIA Format Reporting Internet central station communication with L5100-WIFI or ILP5 module GSM cellular central station communication with internal GSM radio Selection for primary communication path when using dual paths Touch activated radio registration GSM....
Check Stock

DGZZI 50pcs Blue 5mm Pitch PCB Mount Screw Terminal Block Connector for Arduino (20pcs 2 Pin + 15pcs 3 Pin + 15pcs 4 Pin)

  • Application: crystal oscillator, IC socket, DIY PCB universal board, Dupont wire, digital tube, buzzer, Arduino UNO board, PIC programming unit, AVR ATMEL programming unit, connector suite, USB TO TLL module, power module, LCD module, RS232 TO TLL module..
  • Package includes: 20 x 2 Pin Screw Terminal Block + 15 x 3 Pin Screw Terminal Block + 15 x 4 Pin Screw Terminal Block.
Check Stock

Weber # 66836 Igniter Button w/Battery

  • Weber # 66836 igniter button with battery and retention nut.
  • Fits Genesis 300 series gas grills (2011-2013).
  • Replaces Weber ignition button #40277202.
Check Stock

X10 LM465 Lamp Control Module

  • Enables X10 remote control for a plug-in light.
  • Requires TM751 Transmitter. Lamp plugs into the module.
Check Stock