Reviews Silicone Nitride

MCAMPAS Universal Silicon Nitride Hot Rod Ignitor.120 Volt Nitride Igniter Replacement For Silicon Carbide Igniters of The Gas-Fired Forced-Air Furnaces, Water Heaters, Boilers

  • 120 volt nitride furnace igniter Replaces hot surface ignitor for gas-fired furnace, boiler, and water heater.
  • How to tell if your igniter is working， if the igniter has continuity your multimeter should read anywhere from 9 to17 Ohms,if there is no reading on the multimeter or very little change, then there is no continuity and you will have to replace the nitride furnace igniter.
  • 1.97" Nitride heating element, 1.18"Ceramic insulator body nonglazed 95% alumina- polished finish, 15-3/4 inch temperature rating 250℃ cable- 20 AWG/ UL 10362 specification.
  • It works compatible with Cook Top, Cook Top and Range, Furnace and Warm Air Movement, Gas Ignition, Hot Surface Igniters, Infrared light source, Pool Heater and Boilers, Process Machinery, Special FX, Water, and Parking Heaters Nitride heating element.
  • Power rating:150 W. Temperature at 120v ± 0.5v .60HZ at 17 sec ≧1180 ℃.This is a very versatile product, very robust with long cycle life. Silicon nitride is extremely rugged and can be handled without fear of breakage or contamination..
Check Stock

IRWIN Drill Bit Set, Titanium Nitride Coated, 29-Piece (3018003)

  • Titanium Nitride Coated-coated nitride drill bits last longer and feature a cutting edge that stays sharp.
  • 135° split-point tip starts drilling immediately and helps eliminate walking.
  • IRWIN drill bits are great for repetitive metal drilling with portable drills and for use in stationary drill presses.
  • Includes 1/16" through 1/2" drill bit sizes in 1/64" increments.
  • Titanium Nitride drill bits last longer and feature a cutting edge that stays sharp.
Check Stock

Upgraded Replacement fits Goodman Furnace Flame Sensor B11726-06

  • Model specific. NOT universal. Alternate part numbers include AP4420263, 201657035, 201657-03S, 20165702, 20165703, 41602, and 767A-378..
  • This is a single silicone nitride hot surface ignitor measuring approximately 8 x 1.25 x 0.75 inches. It can be used in HVAC gas ignition controls..
  • It is important to disconnect your appliance from the power and gas supply before servicing..
  • Supplying Demand replacement parts are compatible with Major Brands, but you should always verify fitment with your specific model..
  • SD products come in Supplying Demand packaging that includes helpful information should you have any issues..
Check Stock

Riedell UPTOWN 120 BR Mens Rhythm Skates 2009 - Size 5

  • TOP QUALITY CRAFTSMANSHIP - These precision bearings come equipped with hardened Swiss chromium steel alloy balls that can endure long-lasting use..
  • OPTIMIZED DURABILITY - The KwiK Swiss Nitride bearings use a Titanium Nitride coating. This coating does not chip, flake, or degrade during prolonged rough use..
  • CORROSION RESISTANT DESIGN - The KwiK bearings' Titanium Nitride-coated races resist corrosion. They also provide strength and smoothness to create a performance with the greatest roll..
  • FRICTION RESISTANT RETAINERS - These bearings come equipped with friction resistant Delrin retainers that are pre-spun with high-performance oil..
  • SLEEK & LUXURIOUS DESIGN - The 8mm skate bearings come with a metallic gold finish, a design that is worthy of its performance. This product is not a children's product and is not designed or intended for use by children 12 years of age or younger..
Check Stock

DEWALT DW1308-1/8-Inch Titanium Nitride Split Point Twist Drill Bit,Gold

  • The product is 1/8" Titanium Nitride Drill Bit.
  • Titanium Nitride coating for maximum life.
Check Stock

RealSlim Framelock RS7931

  • Precision knife with number 11 fine point blade for exact cuts.
  • Sharp and durable zirconium nitride coated blade.
  • Lightweight aluminum handle is easy to maneuver.
  • Easily cuts paper, fabric, thin metal, and plastic.
  • Safety cap for storage and portability. Zirconium nitride coating for durability.
Check Stock

Buck Knives 417 Budgie Folding Pocket Knife with Clip, Lanyard Hole, 2' S35VN Stainless Steel Blade (Green)

  • Rugged natural G10 handle with a black flash nitride coated lanyard loop.
  • Black flash nitride pocket clip and lanyard hole for easy carry.
Check Stock

USB C Wall Charger Spigen 40W Dual USB C Charger [GaN Fast] 30W Max Each Port Foldable Fast Charger for iPhone 14 13 Plus Pro Max Mini iPhone 12 SE 2022 iPad Pro MacBook Air Galaxy S22 MagSafe Duo

  • Dual USB C PD Charging Port: Up to 30 Watt Power Delivery Output with single USB C port loaded / Total 40 Watt Max(20 Watt for each port) when both....
  • Extended Compatibility: From mobile phones to laptop, 30W Output is compatible with Macbook Air / iPad Air / iPad Pro / Pixel 6 Pro / Pixel 6 and more....
  • High-End Tech: Gallium Nitride (GaN) Technology, unlike Silicon Chipset, Navitas Gallium Nitride (GaN) Chipset allows the ArcStation to be smaller....
  • Reducing damage to your devices: Unlike other fast charging products, with GaN(Gallium Nitride) Chip embedded and IntelligentSafety Technology, it....
  • What You Get: Spigen 40W USB C GaN Charger, welcome guide, 24-Month Warranty, friendly customer service (Cable Not Included)..
Check Stock

USB C Charger Spigen [GaN Fast] 45W Super Fast Charger PPS Charging Type C Charger for Galaxy S21 FE Ultra Plus Z Fold 3 Flip 3 S20 FE Note 20 Pixel 6 Pro Tab S7 iPad Cable Included/Foldable Plug

  • Up to 45W Super Fast Charging: With USB C PD PPS(Programmable Power Supply) protocol, it provides 45W Super Fast Charging for Galaxy S20 Ultra / Note....
  • Gallium Nitride (GaN) Tech: Unlike Silicon Chipset, Navitas Gallium Nitride (GaN) Chipset allows the ArcStation to be smaller than the genuine....
  • Wide Compatibililty: From mobile phones to Laptop, 45W ouput is compatible with Galaxy S21 / S20 / Note 20/ Note 10 / Pixel 6 Pro / Pixel 6 / Pixel 5....
  • Reducing damage to your devices: Unlike other fast charging products, with GaN(Gallium Nitride) Chip embedded and IntelligentSafety Technology, it....
  • What You Get: Spigen 45W USB C GaN Charger x 1 / USB C to USB C (1m/3.3ft) / USB Cable organizer / 24-Month Warranty.
Check Stock

SUOFEILAIMU Abec-11 608 Ceramic Ball Bearing Roller Skates Inline Speed Skating Inline Skate Shoes 7 Ball Ceramic Skate Bearing (Color : 16pcs Bearing 608)

  • Specification: 608Z (single sided metal seal).
  • Bearing material: silicon nitride black ceramic ball + special grade steel inner and outer ring.
  • Number of balls: 7 silicon nitride black ceramic balls.
Check Stock

Spyderco - White Silver - DoubleStuff Sharpening Stone - Fine Ceramic Stone and Cubic Boron Nitride - 303FCBN2

  • Knife Sharpeners - All Spyderco Knife Sharperners share the same key qualities.
  • they are quick and easy to use, do not require oil, water, or complicated clamps and fixtures, and do not need electricity..
  • CUBIC BORON NITRIDE - Cubic Boron Nitride is a superabrasive that is second in hardness to diamond. It offers greater abrasion resistance and thermal conductivity, making it the preferred abrasive in many advanced industrial grinding applications..
  • Specifications - Overall Length (Inches): 5, Materials: CBN & Fine Ceramic Stone.
Check Stock

Nitecore P23i Tactical Flashlight, 3000 Lumen USB-C Rechargeable Long Throw Super Bright with Lumentac Organizer

  • LONG THROW TACTICAL FLASHLIGHT - The Nitecore P23i is super bright, emitting up to 3000 lumens with a throw of 512 yards. Compact enough for EDC yet strong enough as duty lights..
  • USB-C RECHARGEABLE - fast charging waterproof USB-C port. High capacity battery supports a max runtime of 45 hours on low. A battery status indicator reminds you it’s time to recharge..
  • SINGLE HAND OPERATION - Dual switch tail cap to power the flashlight, change the brightness, and access the strobe. Guided button for tail stand capability, accidental activation prevention, and lanyard holes..
  • READY FOR ACTION - Rated IP68 waterproof to use safely in any climate, Impact resistant up to 2 meters. A stainless steel bezel with three silicone nitride inlays for glass breaking..
  • Nitecore P23i Flashlight, USB-C Charging Cable, battery, Holster, Lanyard, Clip and LumenTac Organizer.
Check Stock

Universal Ignitor, 120V Silicon Nitride Hot Rod Ignitor Replacement for Silicon Carbide Igniters of Gas-Fired Forced-air Furnaces, Water Heater and Boiler, Nitride Heater Igniter

  • Compatible Models: This silicon nitride igniter compatible with Cook Top and Range, Cook Top, Furnace, Gas Ignition, Hot Surface Igniters, Infrared light source, Warm Air Movement, Pool Heaters and Boilers, Process Machinery, Special FX, Water and Parking Heaters, etc..
  • Function: When your stove won't light, igniter not glowing, cracked, burned out, cracked, damp, etc., or the igniter has no continuity, the multimeter is not reading or changing small(if the igniter has continuity, then your multimeter should read between 9 - 17 ohms), and you have to replace the nitride igniter.
  • Materials: Consists of stainless steel 304 bright finish bracket, 1.97" nitride heating element, 1.18" ceramic insulator body, non-glazed 95% aluminia polished finish, 15-3/4" 20AWG/ UL 10362 specification 250°C temperature-resistance cable.
  • Hot Side Ignitor/Igniter Specification: Rated voltage: AC 120V +/- 10%-15%, 50/60HZ, Cold resistance: 9-17Ω, Rated power: 150W, Temperature at 120v ± 0.5v. 60HZ at 17 sec ≧1180 ℃, Anti-overvoltage ability: igniter energized for 1 minute -132V. Igniter current not allowed to increa....
Check Stock