Reviews Silicone Hose Clamp

8 Size Heavy Duty Ratcheting Hose Clamp 6.1-26.1mm Adjustable Speedy Double Snap Grip Nylon Plastic Hose Clamp 68PCS Black

  • ... to clamp it to the hose tail, and then engage teeth initially by hands. You could adjust the size (radius) of the hose clips to the size you need.
  • 【Widely Application】This hose clamps set total include 68pcs 8 size black double gripping hose clamps, Perfectly used for air hose, water pipe, automotive fuel line, silicone hose, etc. which are edges smooth will not hurt the pipe, perfect for various silicone/ vinyl tube/ hydrofarm hose fittings..
Check Stock

BorgWarner 13009097049 Super Core Assembly (Super Core Assembly SX-E S300SX-E 9180 (66mm Ind. / 91mm Exd.)), 1 Pack

  • 4-Ply Reinforced High Temperature Silicone Coupler and The hose material is high quality silicone Reinforcement is stronger made with Silicone fluorine polyester or Silicone fluorine nomex.
  • Min temperature: -60 C/-140 F. Max temperature: 260 C/500 F. work pressure: 0.3 to 0.9 MPA. Bursting Pressure: 2MPA. Size tolerance: +/- 0.5MM.
  • 4-Ply Hose for the most demanding applications and is able to withstand high boost pressure. Perfect for use with Turbocharger, Supercharger, Intake, and Intercooler system applications. NOTE: Silicone hose is NOT compatible with fuel or oil.
  • Inner Diameter: 3". Length: 6'' (152mm). Wall Thickness: 5mm. Polyester or Nomex layers to enable high temp and pressure than original rubber hose dose. .It is excellent resistance to Ultraviolet radiation,water,ozone and oxygen.
  • High quality T bolt clamp with Nylon insert locknut performance-engineered for long-term durability. T bolt Clamp provides leak-proof connections in a wide variety applications of Industrial, Automotive and Special Equipment. LTI Provided 12 months warranty from the date of purchased and Free return within 30 days NO QUESTION ASK..
Check Stock

Builder's Best 010155 Venting. Offset Elbow, Dryer, 4-1/2 In, 1 Cubic Centimeters

  • ...ing Tube Fitting, DIY Simple Dryer Ventilation Connection Kit with 1* 90 elbow, 1* drying hose clamp, 1* plastic drying hose..
  • ☑ WHAT IT IS: Dryer Vent Hose 4" Duct Vent Hose is a flexible vent hose made of high quality flame retardant aluminum that measures 4" (diameter) x 8 feet (length) when fully unfolded. The silicone seal in the STV-90 gives you a sealed dryer connection, making your dryer more efficient while consuming less energy and saving on electricity bills. With our newest STV-90 dryer duct connector design, you can install any 4" vent pipe or 4" flexible dryer hose, curved or straight to match..
  • ☑EASY INSTALLATION: Step 1: Tightly combine the drying hose clamp with the Dryer Vent Hoseto prevent the drying hose clamp from falling off the dryer vent hose.Step 2: Combine the protruding part of the dryer vent elbow with what you just finished in step 1, so that they keep a tight connection.Step 3: Insert the sealing ring into the other interface of the dryer exhaust elbow and finally connect it with the dryer vent.You can also find repair videos on YouTube and follow them to install..
  • ☑PLACE OF USE:Aluminum foil duct dryer ventilation hose is mainly used for duct fan systems of various air circulation and ventilation projects, including ....
Check Stock

10X 2 Inch 57mm - 65mm Stainless Steel T-Bolt Clamps Turbo Intake Intercooler Clamp (10Pcs 2 inch)

  • ▶Our T Bolt clamps are made from heavy duty 301 stainless steel and zinc coated nuts with rounded band edges to protect soft hose materials from cuts..
  • ▶These high quality T-bolt clamps offer high tensile strength, durability and corrosion resistance..
  • ▶Universal application,Perfect for DIY Turbo, Intercooler, Intake, Turbo Charger Projects.
  • ▶Clamp Range: 57 mm-65 mm or 2.24"-2.56".
  • ▶This T-Bolt Clamp fits for 2" or 51 mm inner diameter silicone hose fit for 2.4" or 61 mm outer diameter silicone hose..
Check Stock

AKIHISA T-Bolt Hose Clamps,304 Stainless Steel Heavy Duty Adjustable Tube Clamps (23-25mm 4pack)

  • ...Flanging Design] Stainless steel t-bolt clamp is designed to provide a leak-free connection, round arc flanging process of steel belt edge, it could prevent the sharp edges from cutting the pipeline, can protect your tubes better..
  • [Easy to Install] Removable installation, silicone hose clamps can be installed without disconnecting the pipe. High hardness and it is not easy to deform, stainless steel screws, large torque..
  • [Wide Applications] high pressure hose clamp can be used in a wide variety applications of industrial, automotive and special equipment. Fit for fastening various oil, water, gas hose and various hose interfaces..
Check Stock

Non-Stripping 1 inch Hose Clamp Size#10 Wide Higher Torque Heavy Duty 5/8 to 1-1/16 Adjustable Worm Gear Hose Clamps Stainless Steel 304 Pipe Tubing Clamps Heater Hose Clamps 3/4 and 5/8 20Pack

  • ...uckle bottom is welded into one-piece housing for higher tensile strength. These heavy duty hose clamps can provide superior clamping force for solid & safe seal!.
  • Rolled Band Edge Protection: As our 3rd picture, the rolled-up band is effective to prevent the metal edge cutting into the soft hoses, no matter for silicone, pvc or rubber hose. This is an important and safe design for worm drive hose clamps to eliminate the damage to hoses during installation and final torquing, especially for heater silicone hose and automotive applications..
  • Non-Perforated Band Stronger: Compared with perforated band, our non-perforated solid band is virtually impervious to over-tightening, deformed and stripping. The thicker metal is less vulnerable to stress cracking, so the life of screw clamps can last longer. The embossed band also protects the soft hoses from shearing or extruding (like "cheese-grater" making you hard to remove the tubing clamps out of the hoses)..
  • British inch Size: Compared with other metric size metal clamps, our 1 inch worm clamps were engraved clear 5/8 to 1-1/16 inch on band for easy and fast identification when using..
  • All 304 SS: The housing, screws and band of our tubing clamps are all made of high quality 304 stainless steel. The neutr....
Check Stock

AKIHISA 4 Pack 26-28mm ID Range T-Bolt Hose Clamps 304 Stainless Steel Heavy Duty Adjustable Tube Clamp1 to 1.1 Inch

  • [Clamps Size] T bolt clamp adjustable work range 1.02-1.1" (26mm to 28mm).
  • the screw bolt M6*40mm. to save you time, please carefully check and measure your hose OD to fit working range before purchasing our products..
  • [Premium Material] T bolt hose clamp (including the band, housing and screw) is made of high quality stainless steel-304 with fine polishing treatment, salt resistant, anti rust, anti-corrosion, waterproof, oil-proof, resistant to acid, heat and cold. Makes it more durable, wear - resistant and secure ducting tightly..
  • [Flanging Design] Stainless steel t-bolt clamp is designed to provide a leak-free connection, round arc flanging process of steel belt edge, it could prevent the sharp edges from cutting the pipeline, can protect your tubes better..
  • [Easy to Install] Removable installation, silicone hose clamps can be installed without disconnecting the pipe. High hardness and it is not easy to deform, stainless steel screws, large torque..
  • [Wide Applications] high pressure hose clamp can be used in a wide variety applications of industrial, automotive and special equipment. Fit for fastening various oil, water, gas hose and various hose interfaces..
Check Stock

TICONN PEX Clinch Clamps Crimping Tool for 304 Stainless Steel PEX Clamp Rings, PEX Pipe Tubing Connection (Tool only)

  • ...h pliers and easily lower it onto the tube, fast and convenient.
  • It also can be applied repeatedly for many times, saving expenditure.
  • Multiple uses: these water pipe clamp are a first choice for every handy person and home mechanic, which are suitable for fuel pipes/ vacuum hoses/ gas pipes/ air hoses/ water pipes/ silicone soft.
  • It is also the nice choice for pipes, garages, boats, motorcycles, lawns and car engine connections.
Check Stock

Motcoda Flexible Hose Clamp Pliers Tool 24\ Long Reach Locking Clamp Plier For Automotive Radiator Fuel Water 18mm-54mm Hose Clamps

  • 【Flexible hose pliers with long line design】This flexible hose clamp pliers is a 24 inch pliers, designed with 24in flexible wire rope, allowing you to operate flat hose clamps in areas that are usually hard to touch, the flexible hose can be bent to any position, it is An easy-to-operate long-distance remote pliers, remote hose pliers, cable hose clamp pliers.
  • 【Flex pliers with locking function】This flexible pliers, has a ratchet locking mechanism, this locking mechanism keeps the engine hose pliers in the open size position, and holds the cable hose clamp pliers in place, this radiator clamp remover is one-handed Can be operated.
  • is a cooler clamp pliers, radiator hose spring clamp pliers that help you to remove and install easily.
  • 【Widely used long reach clamp pliers】This flexible hose clamp tool can loosen hose clamps on cars, remove factory spring hose clamps, factory GM clamps, machine coolant or radiator hoses.
  • let this flexible hose clamp clamp plyers, can be your radiator hose clamp removal tool, cable clamp plier, heater hose clamp pliers, brake hose clamp pliers, remote hose clamp pliers.
  • 【Multi-Compatible with spring clamp tool】This radiator hose clamp pliers has a maximum opening of 1-1/2" and a long distance of 2 feet.
Check Stock

TEHAUX 32pcs R- shaped Hose Pipe Clamps Air Clamps Rubber Cable Clamp Assortment Kit

  • Application: For automotive fuel lines, small engines, air hose, silicone vacuum hose etc..
  • Rubber cushioned clamp pipes, can be maintained hoses and cables without chafing or damaging the surface of the component being clamped..
  • Made of premium material for durable and practical use..
  • Widely used for hose air hose, water pipe, automotive fuel line, silicone hose, etc.
  • Rubber lining absorbs vibrations and jolts, flexible clamps adapt to fit snugly, reducing wear and tear on cable and hoses..
Check Stock

Best in Rest - CPAP Hose Lift and Hose Support! No Assembly Required! Flexible to fit into Any Space!

  • ... the shape of the space needed for the users convenience and comfort. This extendible rod can be extended and retracted allowing the user to adjust the height of the hose lift with ease..
  • GRIPS on to surfaces with ease with our grip on clamp. The Best in Rest Hose Lift has a sleek and sturdy base with thick non-slip silicone lining to ensure a secure firm grip. The clamp can be adjusted to clamp on to surfaces from 0.25 to 3.25..
  • SIMPLE & EASY TO USE The Best in Rest Hose Lift comes fully assembled, simply adjust to your ideal size and position. Quick disassembly allows for easy and convenient storage..
Check Stock

Cenipar Dryer Vent Hose-4 inch Ducting Vent Hose(4 inch 10 feet) with 2 Clamps and STV-90 Dryer Duct Connector Dryer Hose Snap fit 4in vent ducting

  • ...ng Tube Fitting, DIY Simple Dryer Ventilation Connection Kit with 1* 90 elbow, 1* drying hose clamp, 1* plastic drying hose..
  • ☑ WHAT IT IS: Dryer Vent Hose 4" Duct Vent Hose is a flexible vent hose made of high quality flame retardant aluminum that measures 4" (diameter) x 10 feet (length) when fully unfolded. The silicone seal in the STV-90 gives you a sealed dryer connection, making your dryer more efficient while consuming less energy and saving on electricity bills. With our newest STV-90 dryer duct connector design, you can install any 4" vent pipe or 4" flexible dryer hose, curved or straight to match..
  • ☑EASY INSTALLATION: Step 1: Tightly combine the drying hose clamp with the Dryer Vent Hoseto prevent the drying hose clamp from falling off the dryer vent hose.Step 2: Combine the protruding part of the dryer vent elbow with what you just finished in step 1, so that they keep a tight connection.Step 3: Insert the sealing ring into the other interface of the dryer exhaust elbow and finally connect it with the dryer vent.You can also find repair videos on YouTube and follow them to install..
  • ☑PLACE OF USE:Aluminum foil duct dryer ventilation hose is mainly used for duct fan systems of various air circulation and ventilation projects, including ....
Check Stock

Cenipar Dryer Vent Hose-4 inch Ducting Vent Hose(4 inch 8 feet) with 2 Clamps and STV-90 Dryer Duct Connector Dryer Hose Snap Fit 4in Vent Ducting

  • ...ing Tube Fitting, DIY Simple Dryer Ventilation Connection Kit with 1* 90 elbow, 1* drying hose clamp, 1* plastic drying hose..
  • ☑ WHAT IT IS: Dryer Vent Hose 4" Duct Vent Hose is a flexible vent hose made of high quality flame retardant aluminum that measures 4" (diameter) x 8 feet (length) when fully unfolded. The silicone seal in the STV-90 gives you a sealed dryer connection, making your dryer more efficient while consuming less energy and saving on electricity bills. With our newest STV-90 dryer duct connector design, you can install any 4" vent pipe or 4" flexible dryer hose, curved or straight to match..
  • ☑EASY INSTALLATION: Step 1: Tightly combine the drying hose clamp with the Dryer Vent Hoseto prevent the drying hose clamp from falling off the dryer vent hose.Step 2: Combine the protruding part of the dryer vent elbow with what you just finished in step 1, so that they keep a tight connection.Step 3: Insert the sealing ring into the other interface of the dryer exhaust elbow and finally connect it with the dryer vent.You can also find repair videos on YouTube and follow them to install..
  • ☑PLACE OF USE:Aluminum foil duct dryer ventilation hose is mainly used for duct fan systems of various air circulation and ventilation projects, including ....
Check Stock