Reviews Signal Isolated

RioRand DMX512 LED Signal Splitter Amplifier Distributor 1 Way in 8-Channel 3-Pin Output with Signal Indicator

  • DMX512 signal amplification function and prolong the DMX signal transmission distance.
  • DMX512 signal distribution function, multi-level sharing after a DMX control system.
  • Separate inductors power cable, independent DMX signal ground, the standard DMX independent distribution amplifier.
  • Eight independent isolated output function, to avoid the system after the class DMX signal interference and sabotageOne input, eight independent DMX signal amplifier output.
Check Stock

Boquite CNC Motion Controller, DDCSV3.1 4 Axle Off-Line Controller with Emergency Stop Function Handwheel Kit

  • 16 opto isolated digital inputs,3 opto isolated digital outputs. Upgrade algorithm,support soft interpolation,fixed arc interpolation bug of the old version.
  • Analog spindle control 0-10V spindle control (can be modified as PWM output). 4 axle motor control differential Pulse and direction output signal,maximum.500Khz per axle.
  • ARM9 main control chip,FPGA core algorithm chip. 5 inches TFT screen, resolution ratio: 480x272,17 operation keys.
  • Applications: CNC machine tools, printing machinery and other 0 correction and signal segmentation.
  • After-sale Service. We are confident in our products and stand behind them 100%. Just reach to us with any questions or concerns and we will be happy to help in less than 24 hours!.
Check Stock

Taidacent Ohm Meter Resistance Tester Ohmmeter Digital DC Resistance Measuring Instrument Fixture Resistance Measure Panel Meter (200K Ohm, DC5V with Cover)

  • Power supply: DC5V/DC12V optional (current consumption is less than 50mA).
  • This ohmmeter is a common ground instrument, non-isolated, it is recommended to use a separate power supply, that is, the power supply is not related to the signal.
  • The resistance meter cannot be measured with electricity, otherwise the meter will be burnt out.
  • Select a suitable range, if the range is selected too much, the small resistance cannot be recognized or the measurement is inaccurate.
  • The meter head is a common ground instrument (that is, the negative pole of the power supply and the negative pole of the signal are connected), it is recommended to use a separate, independent, and isolated power supply (that is, the power supply and the measurement terminal are not related).
Check Stock

CNC Motion Controller - DDCSV3.1 4 Axle Off-Line Controller with Emergency Stop Function Handwheel Kit

  • 16 opto isolated digital inputs,3 opto isolated digital outputs.
  • ARM9 main control chip,FPGA core algorithm chip.
  • USB flash disk support for G code file input,no size limited of the G-code file.
  • 4 axle motor Control.Differential Pulse and direction output signal,maximum.500Khz per axle.
  • Upgrade algorithm,support soft interpolation,fixed arc interpolation bug of the old version.
Check Stock

Off-Line Controller,DDCSV3.1 3 Axle Off-Line Controller with Emergency Stop Function Handwheel Kit,Strong Anti-Interference Ability, Long-Distance Transmission

  • [SMART]Support the origin and Limit share the same Input ports.The controller only support NPN type limited switch.Support the operation of quickly specify the running position and ''Power Cut'' recovery. Data is automatically saved..
  • [PROFESSIONAL ] 16 opto isolated digital inputs,3 opto isolated digital outputs.3axle motor Control.Differential Pulse and direction output signal,maximum.500Khz per axle..
  • [EASY TO USE]ARM9 main control chip,FPGA core algorithm chip.5 inches TFT screen, resolution ratio: 480x272,17 operation keys. Analog spindle control 0-10V spindle control (can be modified as PWM output)..
  • [HIGH QUALITY ]Upgrade algorithm,support soft interpolation,fixed arc interpolation bug of the old version..
  • [WIDELY USED] Applications: CNC machine tools, printing machinery and other zero correction and signal segmentation..
Check Stock

DDCSV3.1 3 Axis Offline CNC Motion Controller Handwheel G Code PLC Control System Electronic Handwheel with Emergency Stop Function

  • Upgrade algorithm,support soft interpolation,fixed arc interpolation bug of the old version. ARM9 main control chip,FPGA core algorithm chip. 16 opto isolated digital inputs,3 opto isolated digital outputs..
  • 3 axle motor Control.Differential Pulse and direction output signal,maximum.500Khz per axle. Analog spindle control 0-10V spindle control (can be modified as PWM output). Jog function for each axle (continuous, step, defined distance). 24VDC power input, minimum Current is 0.5A..
  • 5 inches TFT screen, resolution ratio: 480x272,17 operation keys. USB flash disk support for G code file input,no size limited of the G-code file. 1GB internal memory and support standard MPG..
  • Support the operation of quickly specify the running position and ''Power Cut'' recovery. Data is automatically saved. Support the origin and Limit share the same Input ports.The controller only support NPN type limited switch..
  • Drive output type, strong anti-interference ability, long-distance transmission. Applications: CNC machine tools, printing machinery and other zero correction and signal segmentation..
Check Stock

PAC SNI-1 RCA Ground Loop Signal Isolator Car Accessories

  • Line out converter for factory radios with 2 to 30-watts per channel.
  • Accepts speaker level input and provides stereo RCA output signal for adding an aftermarket amplified audio system.
  • Linear 20 to 20,000Hz output based on input signal.
  • Transformer isolated for optimal sound and performance.
Check Stock

DDCSV3.1 Standalone Motion Controller off-line 100 Pulse MPG Handwheel Emergency Stop for CNC Router Engraving Machine (3-Axis with MPG)

  • 16 opto isolated digital inputs,3 opto isolated digital outputs.Analog spindle control 0-10V spindle control (can be modified as PWM output).Drive output type, strong anti-interference ability, long-distance transmission..
  • Upgrade algorithm,support soft interpolation,fixed arc interpolation bug of the old version.5 inches TFT screen, resolution ratio: 480x272,17 operation keys..
  • 4 axle motor Control.Differential Pulse and direction output signal,maximum.500Khz per axle.24VDC power input, minimum current is 0.5A. Support the origin and Limit share the same Input ports.The controller only support NPN type limited switch..
  • ARM9 main control chip,FPGA core algorithm chip.1GB internal memory and support standard MPG.Jog function for each axle (continuous, step, defined distance)..
  • USB flash disk support for G code file input,no size limited of the G-code file.Support the operation of quickly specify the running position and ''Power Cut'' recovery. Data is automatically saved.Applications: CNC machine tools, printing machinery and other 0 correction and signal segmentation..
Check Stock

CNC Motion Controller, DDCSV3.1 3 Axle Off-Line Controller with Emergency Stop Function Handwheel Kit for CNC Machine Tools, Printing Machinery

  • 1GB internal memory and support standard MPG..
  • 16 opto isolated digital inputs,3 opto isolated digital outputs..
  • 3 axle motor Control.Differential and direction output signal,maximum.500Khz per axle..
  • USB flash disk support for G code file input,no size limited of the G-code file..
  • Upgrade algorithm,support soft interpolation,fixed arc interpolation bug of the old version..
Check Stock

Handwheel Off-Line Controller, DDCSV3.1 4 Axle Off-Line Controller with Emergency Stop Function Handwheel Kit for CNC Control

  • 16 opto isolated digital inputs,3 opto isolated digital outputs. ARM9 main control chip,FPGA core algorithm chip..
  • Upgrade algorithm,support soft interpolation,fixed arc interpolation bug of the old version..
  • 4 axle motor Control.Differential Pulse and direction output signal,maximum.500Khz per axle..
  • Handwheel Three Output:Voltage, Single-Ended, Differential.
  • USB flash disk support for G code file input,no size limited of the G-code file..
Check Stock

Handwheel Off-Line Controller, DDCSV3.1 4 Axle Off-Line Controller with Emergency Stop Function Handwheel Kit with Flash Disk Connection Cord

  • 16 opto isolated digital inputs,3 opto isolated digital outputs..
  • ARM9 main control chip,FPGA core algorithm chip..
  • 4 axle motor Control.Differential and direction output signal,maximum.500Khz per axle..
  • Upgrade algorithm,support soft interpolation,fixed arc interpolation bug of the old version..
  • USB flash disk support for G code file input,no size limited of the G-code file..
Check Stock

Intona 7055-C USB 3.0 SuperSpeed Isolator 1kVrms 20kV ESD Protection Supports Full Speed 12Mbps,High Speed hi-Speed 480Mbps and SuperSpeed 5Gbps

  • No external power supply required, up to 500mA current on isolated side. External power can be connected to supply up to 2000mA current on isolated....
  • Galvanic isolation to the USB bus, supports SuperSpeed 5Gbps, hi-speed 480Mbps, full speed 12Mbps and Low speed 12Mbps.
  • 5kVrms signal and power isolation, Advanced ESD protection (20kV).
  • Ultra-quiet power rail isolation for less noise in highly sensitive applications (LT3045).
Check Stock

Juried Engineering CD4016BE CD4016 4016 100-pA 20-V 1 1 SPST 4-Channel Analog Switch Breadboard-Friendly IC DIP-14 Pack of 10

  • Example Applications: Analog signal switching/multiplexing: Signal gating, Squelch control, Chopper, Modulator, Demodulator, Commutating switch, Digital signal switching/multiplexing, CMOS logic implementation, Analog-to-digital & digital-to-analog conversion, Digital control of frequency, impedance, phase, and analog-signal gain.
Check Stock