Reviews Signal Control Cable

Infrared Remote Extender Cable -ir Extender for Cable Box Hidden IR Repeater System with 1 Emitters 1 Receiver (20FT)

  • {IR REMOTE CONTROL} cable extends the signal to a video source like a Blu-ray player so it can be controlled from your HDTV.
  • Red LED in IR Receiver bulb verifies the signal transmission，Operating range:20-60HZ.
  • {HOME THEATER ACCESSORY} repeats the IR signal to a DVD player, STB box, Receiver or other A/V source with an infrared sensor.
  • Route the cable out of sight with a wall mounted HDTV.
  • Install the IR Transmitter end in a concealed equipment closet to hide a CATV box and control it remotely.
  • {SIMPLE INSTALLATION} of this lightweight IR cable.
  • Locate the IR Blaster near the source sensor to repeat the signal to the source.
  • Place the IR Receiver in a convenient location with line of sight of your hand-held remote.
  • IR Tx and Rx cables have adhesive circles on the back for mounting.
  • {UNIVERSAL COMPATIBILITY} with most A/V equipment with infrared sensors (not RF).
  • 180 degree IR Receiver angle provides plenty of leeway to get the right angle with your remote.Remote control signal receiving real-time response to fast forward without delay.
  • {USB POWERED IR }extension cable has an integrated 6 foot Y-cable to receive 5V USB power.
  • Connect to an HDTV USB port or to a USB wall charger(Tip: Devices that need remote control must be placed in a place where y....
Check Stock

Cable Matters Infrared Remote Extender Cable, IR Repeater Cable - 10 Feet

  • IR remote control cable extends the signal to a video source like a Blu-ray player so it can be controlled from your TV.
  • Blue LED in IR Receiver bulb verifies the signal transmission.
  • Home theater accessory repeats the IR signal to a DVD player, STB box, Receiver or other A/V source with an IR sensor.
  • Route the infrared remote control extender cable out of sight with a wall mounted TV.
  • Install the IR Transmitter end in a concealed equipment closet to hide a CATV box and control it remotely.
  • Simple installation of this lightweight IR cable.
  • Locate the IR Blaster near the source sensor to repeat the signal to the source.
  • Place the IR Receiver in a convenient location with line of sight of your hand-held remote.
  • IR Tx and Rx cables have adhesive circles on the back for mounting.
  • USB powered IR extension cable has an integrated 6 foot Y-cable to receive 5V USB power.
  • USB cable on the IR remote extender cable connects to a TV USB power port or to a USB wall charger.
  • Universal compatibility of IR extender cable with most A/V equipment with infrared sensors (not RF).
  • 30 degree IR Receiver angle provides plenty of leeway to get the right angle with your remote.
Check Stock

Professional RF Cable TV Signal Amplifier with High 40dB Gain

  • ...gain and slope adjustments for a professional installation..
  • High-power amplification to compensate for the attenuations of the passive TV distribution components like cable, taps, splitters and cable outlets. Advanced CATV hybrid circuitry providing extremely low-noise figure and minimum distortion. Adjustable gain control and tilt control allows for easy system balancing..
  • Solution in solving the problems of noise, interference and weakness after distribution. Boost RF coax signal with ease for more than 1700FT or 500m if RF TV source signal has fair 70/75dB strength to start with. Boosts the existing CATV or antenna signal strength for greater distance with minimum loss for more TV distribution..
  • Adjustable gain/attenuation to reduce overdriving. Adjustable tilt compensation to allow large CATV systems to be properly balanced and mixed with other CATV or existing RF distribution system. Supports full TV frequency range from 40MHz to 860MHz for analog/digital cable TV, UHF and VHF channels. Anti-Interference module design with advanced noise filer built in..
  • -20 dB Output/Input Test Port is provided for easy trouble shooting. Thunder bolt protection with internal AC fuse built in for high voltage surge events. Aluminum chassis provides excellent heat d....
Check Stock

Xbox One IR Extender Emitter Blaster Cable (4 Head, 10 Foot)

  • Hidden Infrared Repeater System comes with 1 Receiver, 4 Emitters as well as an Adapter for power supply. You can control up to 4 different devices or A/V components such as cable box, Blu ray/DVD player, amplifer and etc even they are placed inside of your cabinet with door closed and even behind the wall..
  • Receiver comes with LED confirmation indicator, picks up signal sending from remote control. You should place the receiver pointing straight to where you use remote control..
  • Emitter sends signal from your remote control to other devices placed behind the door or wall..
  • The receiver cable comes with a USB plug and the package comes with a 5V adapter. You may either take power from devices with USB port or directly from power point with the use of 5V adapter..
  • Compatible with all devices within 34 to 60 kHz. Extra Long cable: 6 Feet for Receiver Cable and 9 Feet for Emitter Cable.
Check Stock

Cubilux AM-2 Gameplay Audio & Voice Chat Mixing Cable, Compatible with Xbox One/360 PS4/PS5 Switch, Mixer Cord to Combine Gaming Sound(Console/Controller) & Chat(Phone/PC) into One Headset/Headphones

  • [Mixing Gaming Audio & Chatting] The cable allows you to talk with your friend through computer or smartphone while playing video games on your Switch, Xbox or PlayStation, giving you better gaming experience and talking quality..
  • [No Audio Interference for Your On-Line Partner] The cable transmits gaming audio signal and chatting signal to your headset and splits MIC-input signal to your friend, so you can hear gaming audio and voice chat at the same time while your friend can only hear your voice..
  • [Superior Audio Quality] Made with 24K gold-plated connector and OFC wires, this cable could minimize signal transmission loss and maximize the intensity of the sound for optimal listening experience..
  • [Support Volume Control and Mute] The cable allows you to easily adjust volume, make handsfree chatting and mute the microphone through the in-line button control of your headphones. Please note that the remote control is only functional on the device with TRRS connector (with chat icon) plugged in..
  • [4 Feet Braided Cable] The long, braided, tangle-free cable gives you more freedom to move around..
Check Stock

QWinOut 8CH Receiver PWM to PPM Sbus Dbus S-Bus Encoder Signal Converter Module Compatible for DJI Phantom 2 Xaircraft Minix Superx V2

  • Effective Picture Only, Product Do Not Include The Receiver!.
  • With This Signal Converter, You Can Be in Average ELF With Ordinary Remote Receiver and Remote Control, and Don't Have to Use Average of Original Remote Control.
  • With This Signal Converter, You Can Put The Average ELF Remote Control Used in The Ordinary Plane (ELF SBUS For The Remote Control Receiver Signal is Converted Into Common PWM Signal Available To Ordinary Electric Harmonic Steering Gear).
  • With This Signal Converter, You Can Put The Ordinary Ppm Signal Of The Remote Control Interface (Coach) Into PMW Signal (The Equivalent of a Cable Receiver, Converted To Ordinary PWM Signal Available to Ordinary Electric Harmonic Steering Gear).
  • Compatibility:  compatible for DJI S.Bus Flight Control and Gimbal, Xaircraft Minix or Superx V2.
Check Stock

Cable Matters 2-Pack 3 Way 4 Pin PWM Fan Splitter Cable - 12 Inches

  • 4 pin fan splitter cable connects 3 computer case fans to a single motherboard fan header.
  • PWM splitter cable connects an additional fan to increase airflow in your computer case.
  • Fan speed label on the 4 pin fan master connector of the fan header splitter is wired to receive the PWM control signal and share it to the slave fans.
  • PC fan splitter connects to the 4-Pin header on the motherboard and splits the signal to 3 PWM fans.
  • PWM fans can spin at the same speed using software from a motherboard equipped with PWM control.
  • CPU fan splitter has a 4 pin fan connector a wire that sends the RPM signal to the motherboard connector for synchronizing the fan speed with the other 2 fans.
  • 3 pin fan connector omits the RPM signal pin for tandem fan speeds with all 3 fans when supported by your computer and fans.
  • Cost-effective 2-pack of computer fan splitter cables provides a spare cable for a adding a fan to increase cooling in your computer.
  • Sleeved and wrapped black 12-inch case fan splitter cable provides a tidy look in an open computer case.
  • 3-pin & 4-pin fan compatible with computer case fans such as the Cooler Master Hyper 212 EVO 120mm, a 200mm case fan such as the Cooler Master MegaFlow 200mm, and 230mm case fans.
  • Add more cooling to your computer with t....
Check Stock

E-outstanding 25dB HDTV TV Antenna Light Amplifie 1PC High Gain Low Noise Amplifier Kit TV HDTV Antenna Signal Booster Gain with USB Power Cable

  • ...gain and slope adjustments for a professional installation..
  • High-power amplification to compensate for the attenuations of the passive TV distribution components like cable, taps, splitters and cable outlets. Advanced CATV hybrid circuitry providing extremely low-noise figure and minimum distortion. Adjustable gain control and tilt control allows for easy system balancing..
  • Solution in solving the problems of noise, interference and weakness after distribution. Boost RF coax signal with ease for more than 2100FT or 650m if RF TV source signal has fair 70/75dB strength to start with. Boosts the existing CATV or antenna signal strength for greater distance with minimum loss for more TV distribution..
  • Adjustable gain/attenuation to reduce overdriving. Adjustable tilt compensation to allow large CATV systems to be properly balanced and mixed with other CATV or existing RF distribution system. Supports full TV frequency range from 40MHz to 860MHz for analog/digital cable TV, UHF and VHF channels..
  • Anti-Interference module design with advanced noise filer built in. -20 dB Output/Input Test Port is provided for easy trouble shooting. Thunder bolt protection with internal AC fuse built in for high voltage surge events. Aluminum chassis provides excellent heat d....
Check Stock

Digital HD Antenna

  • Supports 1080P and 4K - You’ll enjoy great HD picture quality with this digital antenna as long as your TV supports it. By picking up most broadcasting signals in your area, you don’t have to worry about monthly expensive cable plans.
  • Portable Pole Design: Suitable for indoor use, this HDTV antenna ensures portability and with 360 degree reception, you can be sure of strong signal strength.Magnetic base to keep your new digital antenna for smart TVs stealthily tucked away.
  • Up To 300 Miles Range : Updated Amplifier Signal Booster, 300 Miles signal reception range, equip with new type switch control amplifier booster. Below 35 miles, Turn to the short range side! Above 35 miles, Turn the green light on.
  • 10FT Easiest To Install: Setup is a breeze — no assembly required, you can easily install it in less than 3 minutes and 10FT long cable makes it easy to place the antenna in the best reception spot in your home.
  • Reliable Satellite and Cable TV Alternative - Stay connected with the latest in TV technology with this digital antenna. Experience over-the-air broadcasts transmitted in uncompressed full HD. Enjoy watching your smart TV anytime, even when the satellite signal or cable connection is weak or unavailable.
Check Stock

Rockville 6-Zone Amplifier+(14) 8' 2-Way Black Ceiling Speakers for Restaurant

  • ...active, and 1 passive that gets powered through the active via included 1/4″ cable). (2) Rugged Tr. Speaker Stands. (1) Wired Microphone. (1) Mic Clip. (1) XLR to XLR Cable for the Microphone. (1) 19 Ft. 1/4″ Cable for Active to Passive Speaker Connection. (1) Power Cable for Active Speaker. (1) Wireless Remote Control. Owner’s Manual. Warranty Card..
  • Includes of RWM1203VH: 2 wireless handheld microphones. 1 receiver unit. User manual. Batteries. Transfer Cable. Features: Rockville RWM1203VH VHF Dual Channel Handheld Wireless Microphone System. Large display on receiver + digital display on each mic. Each mic is large and solid with a nice weighted feel. Improved high performance wireless handheld microphone capsule. Includes transmitter with two handheld, high sensitivity, unidirectional, wireless cardioid microphones..
  • Features of RNRMR10: Rockville RNRMR10 3.5mm 1/8″ TRS to Dual RCA Cable. Nickel-Plated Plugs for Rugged Durability and Efficient Signal Transfer. 100% Copper Conductors for Enhanced Signal Clarity. OFC Spiral Shields for Effective EMI and RFI Rejection and Flexibility. Length: 10 Ft.
  • Features of RCDR10B: Rockville RCDR10B Black Dual Mono Right Angle RCA to Straight RCA Patch Cable. Dual RCA to Dual RCA. Nickel-Plated for Rugged ....
Check Stock

RockvilIe Dual 12" Android/lphone/lpad/Laptop/TV YouTube Karaoke Machine/System

  • ... (1 active, and 1 passive that gets powered through the active via included 1/4" cable). (2) Rugged Tr. Speaker Stands. (1) Wired Microphone. (1) Mic Clip. (1) XLR to XLR Cable for the Microphone. (1) 19 Ft. 1/4" Cable for Active to Passive Speaker Connection. (1) Power Cable for Active Speaker. (1) Wireless Remote Control. Owner's Manual. Warranty Card..
  • Rockville Power GIG RPG122K (2) 12" DJ/PA Speakers with Stands, Microphone, and Cables . 1000 Watts Peak / 250 Watts RMS / 500 Watts Program Power. High Power 12" Long-throw Woofer with 2" aluminum voice coil for clear sound reproduction and awesome bass response. 25mm Piezo Compression Horn Tweeter For Clear Highs. Bluetooth Built In. TWS linking of 2 systems together wirelessly through Bluetooth..
  • Features of RCDR10B: Rockville RCDR10B Black Dual Mono Right Angle RCA to Straight RCA Patch Cable. Dual RCA to Dual RCA. Nickel-Plated for Rugged Durability and Efficient Signal Transfer. 100% Copper Conductors for Enhanced Signal Clarity. OFC Spiral Shields for Effective EMI and RFI Rejection and Flexibility. Length: 10 Ft. Color: Black.
  • Features of RNRMR10: Rockville RNRMR10 3.5mm 1/8" TRS to Dual RCA Cable. Nickel-Plated Plugs for Rugged Durability and Efficient Signal Transfer. 100% Copper Conductors f....
Check Stock

SZJJX 3.6V 250mah USB Charging Cable for RC Car

  • ¡¾4X4 RC OFF-ROAD ROCK CRAWLER¡¿The 4 wheels drive rc car equipped with high-quality PVC shell, the trim knob to direction control, dual motors....
  • ¡¾2 Rechargeable Batteries Extended Playing Time¡¿The remote control cars equipped with TWO 4.8V/700mAh high-quality rechargeable batteries, you....
  • ¡¾2.4Ghz Independent Signal NO Interference¡¿Monster trucks with 2.4GHz frequency remote control, offer a stable and non-interference signal. It....
  • ¡¾Excellent Anti-Crash Anti-Slip¡¿The four wheels are all packed with anti-slip tires and shock absorbers which gives support to unexpected....
  • ¡¾Convenient & Safe¡¿USB charging cable gives great convenience for charging the monster truck toys. The USB charging cable has several functions....
Check Stock

Monoprice 104784 3' Premier Series XLR Female to RCA Male 16AWG Cable

  • An XLR to RCA cable converts a balanced audio signal into an unbalanced signal. This is good for sending audio signals from an XLR source to an RCA input, or vice versa. Regardless of direction, the result will be an unbalanced signal..
  • This is a premium quality cable with gold plated connectors at each end. The cable is made with two 16 AWG oxygen-free copper conductors, in a twisted-pair arrangement, and is shielded along the full length with copper braid with 97.5% coverage..
  • This cable uses the standard pinout with pins 1 and 3 of the XLR connector wired to the shield of the RCA plug and pin 2 of the XLR connector wired to the tip of the RCA plug..
  • Quality at a Fair Price: Monoprice's rugged design and rigid quality control standards deliver high quality products at fair prices.
Check Stock