Reviews Sight For Glock Mos

Ade RD3-012-G-MOS Green Dot Reflex Sight for Glock MOS 17 19 34 35 40 41 Pistol Handgun

  • This is RD3-012G is GREEN DOT model, there is also a RD3-012 Red dot. The sight has multi brightness level with TWO adjustment button. One to turn....
  • Fits Glock MOS System such as Gen4 17,19,34,40,41,35 and Gen4 17,19,34. It also fits Non-Mos model that using a mounting plate to replace rear sight..
  • This GREEN dot fits directly on Glock MOS system with the #1 mount that comes with MOS without needing to remove the rear sight..
  • Promotes rapid target acquisition while providing a precise point of aim.
  • getting shots down range and on target fast. Top load System, no need to....
  • GREEN dot has multi brightness level with one adjustment button. Every time you turn on the dot it stays the same brightness level last time it was....
Check Stock

Optic Mounting Plate for Glock(Non-MOS/Aftermarket Slide),Taurus GX4,G3C,Canik TP9SA-Compatible with ADE Stingray,Riton X3 Tactix PRD,Trijicon RMR/SRO,Swampox Kingslayer/Liberty/Justice red dot Sight

  • This is a optic mounting plate for Glock that replaces the factory rear sight dovetail of all Non-MOS Glocks from Glock 17 to Glock 43 to glock “100”. Does NOT fit Glock with AFTERMARKET slide. Installing this optic plate requires a qualitied Gunsmith.
  • The included Glock plate fit some other Pistols such as Canik TP9SF(does not fit SFX, COMBAT, SA). This Glock plate also fits Taurus GX4, G3C & G3 with factory steel sights (does not fit any other Taurus models such as G2/G2C/G3 without factory steel sight/Tx22/PT111) because those pistols made the rear sight dovetail based on the Glock rear sight dovetail specifications..
  • This optic dovetail plate made by ADE only fits genuine/standard glock that has a standard factory rear sight. It does NOT for MOS(optics ready) glock. It does NOT fit glock with AFTERMARKET slide..
  • Compatible with RD3-020 Raptor, RD3-023 Valkyrie, RD3-019 Stingray and Trijicon RMR/SRO(Screws provided for Trijicon and ADE). Also compatible with other red dots that shares the similar footprint, but provided screws may NOT work, such as Holosun HS407C/HS507C/HS508T, Riton X3 Tactix PRD, Trijicon RMR/SRO, Swampox Kingslayer/Liberty/Justice red dot sight. We recommend get the right size screws from a local hardware store..
Check Stock

Picatinny Rail Mount plate for Glock 17 19 22 Taurus G3C-Work with All railed red dot such as Vortex Venom, Doctor, Trijicon RMR, comes with builtin screw hole for Sig Romeo Zero, Holosun 407k/507k

  • This is a PICATINNY optic mounting plate for Glock that replaces the factory rear sight dovetail of all Non-MOS Glocks from Glock 17 to Glock 43 to glock “100”. Does NOT fit Glock with AFTERMARKET slide. Installing the aftermarket red dot plate is not simply “plug and play”. We recommend having a qualified gunsmith to install.
  • This picatinny plate for Glock pistol fit some other Pistols such as Canik TP9SF(does not fit SFX, COMBAT, SA). This Glock plate also fits Taurus GX4, G3C & G3 with factory steel sights (does not fit any other Taurus models such as G2/G2C/G3 without factory steel sight/Tx22/PT111) because those pistols made the rear sight dovetail based on the Glock rear sight dovetail specifications..
  • This optic dovetail plate made by ADE only fits genuine/standard glock that has a standard factory rear sight. It does NOT for MOS(optics ready) glock. It does NOT fit glock with AFTERMARKET slide..
  • This picatinny mount provides 2 rail slots. Any red dot optic that equipped with a picatinny plate, is able to attach to this picatinny rail mount on a Glock pistol. Some red dots such as Vortex Venom, Burris Fastfire and ADE RD3 come with a picatinny mount with the red dot purchase, user can use the red dot provided picatinny mount to ....
Check Stock

Kingslayer [Explicit]

  • ...tible with regular glock 43x/48 that are not MOS), Springfield Hellcat OSP, S&W Shield 2.0 Optics Ready, S&W MP9 EZ, S&W M&P shield plus performance center, Walther PPS M2 Optics Ready, Girsan MC1911SC Ultimate or any pistol/mounting plate/slide with RMS/RMSC screw pattern/footprint..
  • EASE OF USE: Cyelee CAT red dot sight is always powered on with shake awake function.After four minutes without motion, illumination shuts off. Even the smallest tap or tilt will wake it up to the previous brightness setting..
  • RUNTIME: Operates with a single CR2032 3v battery. With our advanced technology the sight only draws approximate 200 microampere powers to give a very long battery life.It is perfect for daily carry..
  • RELIABLE:Reliable Design，a concealed carry optic must be ultra- dependable, because you are literally betting your life that it will be ready when called upon. CAT is waterproof and shockproof. The integrated co-witness notch provides an added sense of security in critical situations and allows for multiple aiming options..
  • DURABLE: Constructed from aerospace grade aluminum with recessed optic lens for added protection – IPX6 water resistant.
  • DIMENSIONS:CAT is really small. About an inch tall, an inch wide, and 1.6 inches long. Shoehorned into this ti....
Check Stock

Ade RD3-013-MOS Red Dot Reflex Sight for Glock MOS 17 19 34 35 40 41 Pistol Handgun

  • Fits Glock MOS System such as Gen4 17,19,34,40,41,35 and Gen4 17,19,34.
  • This Red dot fits directly on Glock MOS system with the #1 mount that comes with MOS without needing to remove the rear sight..
  • Promotes rapid target acquisition while providing a precise point of aim.
  • getting shots down range and on target fast. Top load System, no need to Remove the sight to change the Battery.
  • New advanced battery technology gives up to 2000 hours on bright setting and up to 30k hours on Low setting with a 1632 Battery(Included). Come with a mounting plate for picatinny rail..
  • 4 MOA dot.Red dot DOES NOT auto power off. It stays on til use manually power off. It has multi brightness level with one adjustment button..
Check Stock

SAWKE Glock Sight Mount Plate - Glock 17 19 22 23 26 27 34 Mounting Plate Mini Red Dot Sight,Glock Mount Plate Red dot Burris Sightmark Vortex

  • CAUTION: Not fit for RMR, RMS, DOCTOR and Glock m.o.s. system. NOT fit Glock 19 mos..
  • Glock red dot base plate fits Glock 17 19 22 23 26 27 31 34 35..
  • This glock red dot mount fits Ade Advanced Optics rd3-001, rd3-02, rd3-009, rd3-006a and Sightmark mini shot reflex sight..
  • Fits Vortex/Viper/Venom, Burris Fastfire micro red dot sight..
  • Attaches firmly to your pistol for excellent performance in tactical situations Replace the rear sight slot with mini red dot base plate..
Check Stock

Cyelee CAT Shake Awake Micro Green Dot Sight, 3.5 MOA Reflex Sight for RMS/RMSC Footprint Optics Ready Pistol

  • Micro red dot sight fit Canik Elite TP9 SC, Canik METE SFX, Canik METE SFT, Sig P365XL/P365X, Ruger Max-9, Glock 43X MOS/48 MOS(not compatible with regular glock 43x/48 that are not MOS), Springfield Hellcat OSP, S&W Shield 2.0 Optics Ready, S&W MP9 EZ, S&W M&P shield plus performance center, S&W Equalizer, SCCY DVG-1 RDR, Walther PPS M2 Optics Ready, Girsan MC1911SC Ultimate or any pistol/mounting plate/slide with RMS/RMSC screw pattern/footprint..
  • EASE OF USE: Cyelee CAT Green Dot Sight is always powered on with shake awake function. After four minutes without motion, illumination shuts off. Even the smallest tap or tilt will wake it up to the previous brightness setting..
  • RUNTIME: Operates with a single CR2032 3v battery. With our advanced technology the sight only draws approximate 200 microampere powers to give a very long battery life.It is perfect for daily carry..
  • RELIABLE:Reliable Design, a concealed carry optic must be ultra- dependable, because you are literally betting your life that it will be ready when called upon. CAT Green Dot Sight is waterproof and shockproof. The integrated co-witness notch provides an added sense of security in critical situations and allows for multiple aiming options..
  • DURABLE: Constructed from aerospace grade alum....
Check Stock

Ade RD3-009-MOS Red Dot Reflex Sight for Glock MOS 17 19 34 35 40 41 Pistol Handgun

  • Fits Optics Ready Pistol such as Glock MOS System such as Gen4 17,19,34,35,40,41,43,43x and also fit Springfield OSP(non-hellcat), Canik TP9 SFX/Elite Combat(non elite sc), Walter PPQ Q5 Match, FNX 45 Tactical, IWI Masada handguns that come with mounting plates that marked for DOCTOR/VORTEX VENOM type red dot.
  • All mentioned above pistols must to be OPTICS READY model that comes with MOUNTING PLATE marked for DOCTOR/VORTEX. If not, user has to purchase after market mounting plate(not included with this red dot sight purchase) to replace the rear sight. For Non-MOS(non-optics ready) glock, search part number B01L9734Y6 on amazon for optic plate..
  • This red dot does NOT fits glock with AFTERMARKET/Non-Genuine Glock slide with custom optic cut for RMR because the footprint is different. 5 MOA. 5 Illumination Settings. Powered by a lithium CR2032 battery(Included).
  • Comes with an Picatinny mounting plate. It does not comes with any other red dot mounting plate for a specific handgun, user need to purchase the plate separately for the plate made for the specific handgun..
  • Waterproof for 30mm under 3ft water. Shock/Fog Resistant.
Check Stock

Ade RD3-012 Red Dot Reflex Sight for Glock MOS 17 19 34 35 40 41 Pistol Handgun

  • Fits Glock MOS System such as Gen4 17,19,34,40,41,35 and Gen4 17,19,34.
  • This Red dot fits directly on Glock MOS system with the #1 mount that comes with MOS without needing to remove the rear sight..
  • Promotes rapid target acquisition while providing a precise point of aim.
  • getting shots down range and on target fast. Top load System, no need to....
  • 6 MOA dot. Come with Protected Cover, Adjustment wrench, Adjustment dailing plate, User Manual and Picatinny mounting plate..
  • 1.75" length x1.25" width x1.15" height. Shockproof, Fogproof and waterproof for 30 minutes under 4ft water.Feature 1 M.O.A wind age and elevation....
Check Stock

Ade RD3-012-MOS Red Dot Reflex Sight for Glock MOS 17 19 34 35 40 41 Pistol Handgun

  • Fits Glock MOS System such as Gen4 17,19,34,40,41,35 and Gen4 17,19,34.
  • This Red dot fits directly on Glock MOS system with the #1 mount that comes with MOS without needing to remove the rear sight..
  • Promotes rapid target acquisition while providing a precise point of aim.
  • getting shots down range and on target fast. Top load System, no need to....
  • 6 MOA dot. Come with Protected Cover, Adjustment wrench, Adjustment dailing plate, User Manual and Picatinny mounting plate..
  • 1.75" length x1.25" width x1.15" height. Shockproof, Fogproof and waterproof for 30 minutes under 4ft water.Feature 1 M.O.A wind age and elevation....
Check Stock

Ade Advanced Optics NUWA (RD3-021) Micro Red Dot Sight for Canik TP9 Elite SC, Canik Mete SFT, Sig Sauer 365XL, Ruger Max9 and Springfield Hellcat OSP/PRO

  • ..., Girsan MC1911SC Ultimate or any pistol/mounting plate/slide with RMS/RMSC screw pattern/footprint..
  • Hard coated aircraft aluminum and multi-coated glass. Not plastic body with polymer lens..
  • ADE NUWA is the first(and the only)red dot with RMS/RMSc footprint that has TOP BATTERY LOADING system, no need to Remove the sight to change the Battery that requires re-sight in and waste ammo. Battery life approximately 500-800 depends on the brightness setting. 2MOA Red Dot. Weight approximately 15.5 grames(0.55oz), (Length)1.5" x (Width)..88" x (Height).89".
  • Comes with screws for several Optics Ready handguns. Does not comes with any mounting plate such as picatinny mount or plate made for a specific handgun..
  • Ade Nuwa created an iron sight curve at the end of the body, and also added two white dots on the curve. For the rear of part of the red dot to become a back up iron sight. With the ultra short design, the red dot provides a distance/gap on some full size optics ready pistols, to give enough distance to be a Co-Witness back up sight, in addition to the LED dot and pistol equipped iron sight.
Check Stock

Kingslayer

  • This listing comes with ADE red dot, a picatinny mounting plate(pre-assembled) and a pistol mounting plate for Glock that replaces the factory rear sight dovetail of all Non-MOS Glocks from Glock 17 to Glock 43 to glock “100”. Does NOT fit Glock with AFTERMARKET slide with optic cut..
  • The included Glock plate also fit some other Pistols such as Canik TP9SF(does not fit SFX, COMBAT, SA). This Glock plate also fits Taurus GX4, G3C & G3 with factory steel sights (does not fit any other Taurus models such as G2/G2C/G3 without factory steel sight/Tx22/PT111) because those pistols made the rear sight dovetail based on the Glock rear sight dovetail specifications. While it is possible to install this mount without the use of a Gunsmith, we recommend hiring a professional gunsmith.
  • We have made several improvements since it’s initial release in 2015. We have made it more durable to withstand various recoil and improved the ability to hold zero. Designed in Oregon. The on/off switch is located at the front of the sight, it is so much easier to press than the Red dots has the switches on the side..
  • Shock/Fog Proof. It is rain resistant, but not waterproof. Lenses are precision ground and Polished to exacting geometries to virtually eliminate Parallax a....
Check Stock

Kingslayer [Blu-ray]

  • This listing comes with ADE red dot, a picatinny mounting plate(pre-assembled) and a pistol mounting plate for Glock that replaces the factory rear sight dovetail of all Non-MOS Glocks from Glock 17 to Glock 43 to glock “100”. Does NOT fit Glock with AFTERMARKET slide with optic cut..
  • The included Glock plate also fit some other Pistols such as Canik TP9SF(does not fit SFX, COMBAT, SA). This Glock plate also fits Taurus GX4, G3C & G3 with factory steel sights (does not fit any other Taurus models such as G2/G2C/G3 without factory steel sight/Tx22/PT111) because those pistols made the rear sight dovetail based on the Glock rear sight dovetail specifications. While it is possible to install this mount without the use of a Gunsmith, we recommend hiring a professional gunsmith.
  • We have made several improvements since it’s initial release in 2015. We have made it more durable to withstand various recoil and improved the ability to hold zero. Designed in Oregon. The on/off switch is located at the front of the sight, it is so much easier to press than the Red dots has the switches on the side..
  • Shock/Fog Proof. It is rain resistant, but not waterproof. Lenses are precision ground and Polished to exacting geometries to virtually eliminate Parallax a....
Check Stock