Reviews Shrinkable Insulation Tube
5 Feet 1/2 Inch Heat Shrink Tubing 3:1 Adhesive-Lined Heat Shrinkable Tube Waterproof Insulation Sealing DIY by Purple-fox Black Dia(12.7mm (1/2\))
- Safety and Environmental Protection: Purple-fox heat-shrinkable tubes are UL and CSA certified, RoHS compliant, free of formaldehyde (HCHO), heavy metals and other harmful substances protecting you and your family from toxins.
- Versatile and DIY Helper: High-quality heat shrink tubing, they can be used for solder joint protection, group of lines marking, resistance electric capacity reason protection etc. Note: Make sure temperature of your heat gun is up to 212℉(Fahrenheit), then glue inside will soften and seal the connection..
- Great Advantages : Our heat-shrinkable tube are with glue lined which has the advantages of good electrical insulation, good sealing, corrosion resistance and high temperature resistance. Anti-aging, tough, not easy to break..
- Easy and fast: It is 3:1 heat shrink ratio, and will shrink up to 1/3 of original, only use a lighter heating if the tube is small or hair dryer heating or heat gun for large one..
- Widely Applications: Heat-shrinkable tubes are mainly used for wire links, anti-rust and anti-corrosion protection of solder joints, and audio and electrical DIY. Wire ends, harnesses, electronics protection and insulation treatment. Fitness equipment parts and steel structure surface protection and so on..
Check Stock720 PCS Heat Shrink Tubing Kit, Heat Shrink Tubes Wire Wrap, KOOWIN Ratio 2:1 Electrical Cable Wire Kit Sleeve Assortment with Box Set Insulation Protection (8 Sizes Assorted, Polyolefin Black)
- ...y Shrinkage Ratio: 2:1(will shrink to 1/2 its supplied diameter), Operating Temperature: -55°C to 125°C, Shrink Temperature: 84℃-120℃, Withstand Voltage: 600V.
- 【Complete Variety】Comes with 720 pcs black heat shrink tube assorted in plastic box, 8 Specifications , satisfied for your different need, The heat shrinkable tube with a length of 1-9/16 inch has a diameter of Φ3/64" (1MM) 160 PCS, Φ5/64" (2MM) 120 PCS, Φ1/8" (3MM) 120 PCS, Φ5/32" (4MM) 90 PCS, Φ13/64" (5MM) 60 PCS, Φ15/64" (6MM) 50 PCS, Φ5/16" (8MM) 60 PCS, Φ25/64" (10MM) 60 PCS..
- 【Multifunctional & DIY assistant】There are many sizes of high-quality heat shrinkable tubes for you to choose, they can be used for solder joint protection, wire group marking, resistance and capacitance cause protection, etc..
- 【Easy to Use】 This heat shrinkable tube has good electrical insulation, corrosion resistance and high temperature resistance. Soft and soft wire shrink sleeve, low shrink temperature-minimum shrink temperature: 84°C, fast shrinkage, easy to use heat gun.
- 【30-Day Refund】All customers enjoy 30-day refund & one-year warranty service. If the customer is not satisfied with the purchase for any reason, the product can be returned or refunded..
Check Stock530Pcs 18650 Insulator Ring and 500Pcs (29.5mm10 Colors)18650 FlatFire Retardant PVC Battery Wrap Heat Shrink Tube for 18650 Batterie
- 1. High quality PVC heat shrinkable tube of battery has excellent environmental protection, heat insulation, stable performance and rapid shrinkage. 5 mm, shrinkage temperature: 80 ℃, shrinkage rate: ≥ 48 ± 5%.
- 2、 Length 72.5MM/2.85inch and width29.5MM/1.16in Round diameter: Φ18.7mm/0.74in 500个 PVC heat shrinkable tubes in 10 different colors, 50 in each color. Note: please put the product in a cool and dry place to avoid deformation caused by high temperature.
- 3.Good insulation,corrosion resistance,tear resistance and wear resistance it have waterproof function.
- 4.Safe and stable,better protection to avoid battery shorts,easy to peel and paste.
- 5.Insulating ring Outer ring diameter: Φ18mm. Inner ring diameter: Φ10mm the thickness is 0.18MM.
Check Stockuxcell Battery Wrap PVC Heat Shrink Tubing 50mm Flat for 18650 Power Supply 5m Blue
- This PVC heat shrink tube is a great items for protecting and repairing the cover..
- Shrinking Rate: 48%(cross section)and 5%(longitudinal).
- Insulation, stable performance and fast shrinkage..
Check Stockuxcell 2Meters 85mm Width PVC Heat Shrink Wrap Tube Blue for 18650 Battery Pack
- This PVC heat shrink tube is a great items for protecting and repairing the cover..
- Shrinking Rate: 48%(cross section)and 5%(longitudinal).
- Insulation, stable performance and fast shrinkage..
Check Stock5Pcs 3mm Heat Shrink Tubing Kit, Diameter 3mm Heat Shrink Tubing Shrinkable Tube 16ft
- ♥This pack of brand-new and high-quality heat shrink tube is suitable for fishing tackle, electrical insulation, wire bundling, cable joints and repairs and mechanical protection.
- ♥Diameter 3mm Heat Shrink Tubing Shrinkable Tube 5 Meter.
Check StockOCR Flat PVC Heat Shrink Tubing Battery Wrap for 1x 18650 Battery 300PCS 29.5mm *12 Colors
- High quality PVC heat shrink tube for 18650 batteries..
- Excellent environmental protection, insulation, stable performance and fast shrinkage..
- Shrinkable Temperature:80℃,Shrinking Rate:≥48±5%.
- Package includes 12 different colors 300pcs PVC heat shrink tube,each color 25pcs..
- Note:Please place this product in a cool place to avoid deformation due to high temperature.
Check Stockuxcell 20pcs Battery Wrap PVC Heat Shrink Tubing 29.5mm Flat Width for 18650 Power Supplies 5m Length Blue
- This PVC heat shrink tube is a great items for protecting and repairing the cover..
- Shrinking Rate: 48%(cross section)and 5%(longitudinal).
- Insulation, stable performance and fast shrinkage..
Check StockXHF 164 FT 1/4\ Heat Shrink Tubing Roll 2:1,Electrical Industrial Shrink Tube for Wire Insulation Black
- [Safety and environmental protection] XHF 2:1 heat shrink tube are CSA certified, RoHS compliant, free of formaldehyde (HCHO), heavy metals and other harmful substances. Don't worry about it hurting your body and environment..
- [A wide range of applications] Shrink tube are mainly used for industrial, ship, wire links, anti-rust and anti-corrosion protection of solder joints, and audio and electrical DIY. Wire ends, harnesses, electronics protection and insulation treatment, fitness equipment parts and steel structure surface protection and so on..
- [Good shrinkage performance] XHF heat-shrinkable tube has the advantages of good electrical insulation, good sealing, corrosion resistance and high temperature resistance. Anti-aging, tough, not easy to break..
- [Easy and fast] You only need to heat it evenly with a hot air blower or a candle to make it shrink. It is a 2:1 heat shrink ratio and will shrink to the original 1/2..
- [Diversity] We have three kinds of shrinkage (2:1, 3:1, 4:1) heat shrink tubes for you to choose from..
Check StockXHF 164 FT 1/16' Heat Shrink Tubing Roll 2:1,Electrical Industrial Shrink Tube for Wire Insulation Black
- [Safety and environmental protection] XHF 2:1 heat shrink tube are CSA certified, RoHS compliant, free of formaldehyde (HCHO), heavy metals and other harmful substances. Don't worry about it hurting your body and environment..
- [A wide range of applications] Shrink tube are mainly used for industrial, ship, wire links, anti-rust and anti-corrosion protection of solder joints, and audio and electrical DIY. Wire ends, harnesses, electronics protection and insulation treatment, fitness equipment parts and steel structure surface protection and so on..
- [The rubber liner has good sealing performance] XHF heat-shrinkable tube has the advantages of good electrical insulation, good sealing, corrosion resistance and high temperature resistance. Anti-aging, tough, not easy to break..
- [Easy and fast] You only need to heat it evenly with a hot air blower or a candle to make it shrink. It is a 2:1 heat shrink ratio and will shrink to the original 1/2..
- [Diversity] We have three kinds of shrinkage (2:1, 3:1, 4:1) heat shrink tubes for you to choose from..
Check Stock200pcs 18650 Battery PVC Heat Shrink Wrap Tube (30mm) and 200pcs 18650 Battery Insulator Ring for 18650 Batterie Insulation Protection
- Material: PVC Heat Shrinkable and Highland Barley Paper.
- Size: PVC Heat Shrink Tube: Wide 30mm(1.18in) , Length 72mm(2.83in) , Thick 0.08mm.
- Insulating Ring: Diameter 18mm, Inner Diameter 10mm Thick 0.2mm.
- Shrinkage Rate: 48% (cross-section), 5% (longitudinal).
- Advantages: Insulation Protection, Fast Shrinkage, Multiple Applications.
- Application: Used for 18650 Lithium Battery DIY, Battery Refurbishment, and Enhanced Electrical Insulation..
Check StockCable Lug Crimping Tool with 170pcs Copper Wire Lugs, Wire Crimping Tool for AWG 10-1/0 Electrical Lug Crimper, with Cable Cutter, 210pcs Dual Wall Adhesive Heat Shrink Tubing
- 【Complete Kit】- You will get a battery cable wire lug crimping tool, a cable cutter, 170pcs copper ring terminal block, 210pcs heat shrinkable tube, the size and quantity are complete to meet your various needs..
- 【10-1/0 Lug Crimper】- Professional cable terminal crimping tools are 6mm²/10mm²/16mm²/25mm²/35mm²/50mm² (similar to AWG 10, 8, 5, 3, 2, 0). It uses high-precision jaws to ensure a tight connection after crimping..
- 【Electrolytic Grade Copper】- All ring terminals are made of electrolytic grade copper to achieve maximum conductivity. The heat shrinkable tube is made of high-quality polyethylene material, which is thick and durable..
- 【Labor-saving Crimping】- The handle of the crimping device is up to 10" long and is wrapped with soft rubber. The ergonomic lever structure design can increase friction and make you more labor-saving when crimping..
- 【Heat Shrinkable Tube】- The heat shrinkable tube is made of high-quality polyethylene material, which is thick and durable..
Check StockXHF 1 Inch (25mm) 3:1 Waterproof Heat Shrink Tubing Marine Grade Wire Cable Adhesive Lined Tube Insulation Seal Against Moisture Corrosion and Air Leakage, 4 Ft Black
- [Better protection]: double wall heat shrink tube and lined with glue can better act on the wrapped objects..
- [A wide range of applications] Shrink tube are mainly used for industrial, ship, wire links, anti-rust and anti-corrosion protection of solder joints, and audio and electrical DIY. Wire ends, harnesses, electronics protection and insulation treatment, fitness equipment parts and steel structure surface protection and so on..
- [The rubber liner has good sealing performance] XHF heat-shrinkable tube has the advantages of good electrical insulation, good sealing, corrosion resistance and high temperature resistance. Anti-aging, tough, not easy to break..
- [Easy and fast] You only need to heat it evenly with a hot air blower or a candle to make it shrink. It is a 3:1 heat shrink ratio and will shrink to the original 1/3..
- [Diversity] We have three kinds of shrinkage (2:1, 3:1, 4:1) heat shrink tubes for you to choose from..
Check Stock