Reviews Shotgun Saddle Shell Holder

Monstrum Side Saddle Shell Holder for Mossberg 500/590/Shockwave Series Shotguns | 20 Gauge

  • Built for use with Mossberg 500, 590, and Shockwave Series shotgun models.
  • Not intended for use with other shotguns models.
  • Shell holder available in two sizes - 12 gauge saddle accomodating up to six 12 gauge shells and 20 gauge saddle accomodating up to seven 20 gauge shells.
  • Unit installs into the factory mounting holes of Mossberg 500 / 590 / and 590 Shockwave Series shotgun models with no additional gunsmithing required.
  • All Monstrum accessory products come with a lifetime guarantee.
Check Stock

Rifle Shell Holder Buttstock Holder Rifle Cartridge Shotgun Ammo Carrier Side Saddle Carrier Nylon for 12/20Ga 2 Packs

  • Size: 5 rounds in 4.7" (L) x 2"(W) or 6 rounds in 6"(L) x 2"(W) . Please Note: Ammo are NOT included..
  • The buttstock shell holder is made of sturdy 1000D elastic nylon webbing, which is durable, sturdy and lightweight to carry. Package includes 2....
  • The shell holder comes with sticky back loop to place it on the side of the gun ,buttstock . This way you can easily install and keep your shells in a....
  • The shotgun side saddle loops are tight enough to make it have strong friction, which ensures that the bullet will not fall due to recoil during....
  • The shotgun shell holder works great for quick replacing, it can attach to MOLLE system, any belt, backpack or other molle gear with magic tape. If....
Check Stock

Kosibate Shotgun Shell Holder Ammo Pouch fits for 12G 20 Gauge 10 Round Tactical Molle Shotshell Carrier Black

  • Built for use with Mossberg 500, 590, and Shockwave Series shotgun models.
  • Not intended for use with other shotguns models.
  • Shell holder available in two sizes - 12 gauge saddle accomodating up to six 12 gauge shells and 20 gauge saddle accomodating up to seven 20 gauge....
  • Unit installs into the factory mounting holes of Mossberg 500 / 590 / and 590 Shockwave Series shotgun models with no additional gunsmithing required.
  • All Monstrum accessory products come with a lifetime guarantee.
Check Stock

Monstrum Side Saddle 12 Gauge Shotgun Shell Holder | Compatible with Remington 870/TAC-14/1100 Series Shotguns

  • Side saddle shell holder for use with Remington 870/TAC-14/1100 Series shotgun platforms.
  • Unit installs into the pin holes on the side of the receiver with no additional gunsmithing required.
  • Accomodates up to six 12 gauge shotgun shells.
  • Not compatible with other shotgun models.
  • All Monstrum mount and accessory products are backed by a lifetime warranty.
Check Stock

Monstrum Side Saddle 12 Gauge Shotgun Shell Holder | Compatible with Maverick 88/Mossberg 500/590/Shockwave Series Shotguns

  • Side saddle shell holder for use with Mossberg 500/590/Shockwave/Maverick 88 Series shotgun platforms.
  • Unit installs into the pin holes on the side of the receiver with no additional gunsmithing required.
  • Accomodates up to six 12 gauge shotgun shells.
  • Not compatible with other shotgun models.
  • All Monstrum mount and accessory products are backed by a lifetime warranty.
Check Stock

Buttstock Holder Rifle Cartridge Shotgun Ammo Carrier Adhesive Side Saddle for 12Ga (6 Rounds- 4 Pack)

  • Made of sturdy 1000D elastic nylon webbing. Package includes 2 Holders for 12GA..
  • The holder comes with sticky back loop to place the shell holder on the side of the gun or buttstock..
  • Shells are held securely in place, out of the way. Ergonomically designed with tactical experience in mind, this shell holder drastically cuts reloading time..
  • The holders fit perfectly into a shotgun pouch for quick replacement of an empty side saddle after a tactical reload..
  • Size: 5.9" (L) x 2.3"(W). Note: Ammo are NOT included..
Check Stock

JINJULI Buttstock Holder Rifle Cartridge Shotgun Ammo Carrier Adhesive Side Saddle Nylon for 12Ga 5 Rounds - 2 Pack

  • Made of sturdy 1000D elastic nylon webbing. Package includes 2 Holders for 12GA..
  • The holder comes with sticky back loop to place the shell holder on the side of the gun or buttstock..
  • Shells are held securely in place, out of the way. Ergonomically designed with tactical experience in mind, this shell holder drastically cuts....
  • The holders fit perfectly into a shotgun pouch for quick replacement of an empty side saddle after a tactical reload..
  • Size: 6.1" (L) x 2.2"(W). Note: Ammo are NOT included..
Check Stock

XS SIGHTS Big Dot Shotgun Sights, Tritium and Ember Glow Front Sights, Fits Remington 870 and Mossberg 500/590 & Plain Barrels (Tritium White, Mossberg 500/590 & Plain Barrels)

  • Built for use with Mossberg 500, 590, and Shockwave Series shotgun models.
  • Not intended for use with other shotguns models.
  • Shell holder available in two sizes - 12 gauge saddle accomodating up to six 12 gauge shells and 20 gauge saddle accomodating up to seven 20 gauge shells.
  • Unit installs into the factory mounting holes of Mossberg 500 / 590 / and 590 Shockwave Series shotgun models with no additional gunsmithing required.
  • Rail mount allows for the mounting of Picatinny or Weaver standard scopes, red dots, or other optics.
  • All Monstrum accessory products come with a lifetime guarantee.
Check Stock

Nylon Buttstock Holder Rifle Cartridge Shotgun Ammo Carrier with Adhesive Side Saddle Backing Strip 5 Rounds - 4 Pack 5 Rounds - 4 Pack

  • The holder comes with sticky back loop to place the shell holder on the side of the gun or buttstock..
  • Shells are held securely in place, out of the way. Ergonomically designed with tactical experience in mind, this shell holder drastically cuts....
  • The holders fit perfectly into a shotgun pouch for quick replacement of an empty side saddle after a tactical reload..
  • Size: 4.92x1.96 inch (12.5x5 cm). Note: Ammo are NOT included and other models..
Check Stock

FUNANASUN Buttstock Holder Rifle Cartridge Shotgun Ammo Carrier Adhesive Side Saddle Nylon for 12Ga 5 Rounds- 2 Pack

  • Made of sturdy 1000D elastic nylon webbing. Package includes 2 Holders for 12GA. (If you have any questions, Please contact us for free, we will....
  • The holder comes with sticky back loop to place the shell holder on the side of the gun or buttstock..
  • Shells are held securely in place, out of the way. Ergonomically designed with tactical experience in mind, this shell holder drastically cuts....
  • The holders fit perfectly into a shotgun pouch for quick replacement of an empty side saddle after a tactical reload..
  • Size: 5.9" (L) x 2.3"(W). Note: Ammo are NOT included..
Check Stock

DeSantis Kurz Shotgun Case, Convenient Case for Carrying Gun and Shells, Must-Have Shotgun Accessories, Made of Premium Full-Grain Saddle Leather, Ambidextrous, Tan

  • Kurz Shotgun Case: A new take on the traditional shotgun scabbard, DeSantis Kurz Shotgun Case is designed around the popular 14” pump action firearms in 12, 20, and 0.410 gauge. The carrying case effectively safeguards your shotgun and ammunition.
  • Saddle Leather: Crafted from premium center-cut cowhide and trimmed in full-grain saddle leather, the Kurz shotgun case is a perfect example of durability and functionality. Our lightweight and sturdy shotgun case is suitable for both men and women.
  • Ideal Carrying Case: As an ideal shotgun accessory, our carrying case allows easy and safe transport of your shotgun and shells. The ambidextrously configurable shotgun case has a snap closure to keep your gun safe and intact while carrying.
  • Easy to Carry: With an attached shoulder strap and top handle, you can carry our nice tan-colored shotgun case in whichever way you like. Either carry it as a handbag or let the case rest on your back with its non-slip and durable shoulder strap.
  • Reinforced with a Shell Attachment: Our versatile shotgun case will carry not only your shotgun but also your....
Check Stock

Coolrunner 8 Round Shotgun Shell Holder Buttstock Holder for 12/20 Gauge Ammo Tactical Shotgun Holder for Hunting

  • Design Idea: The shotgun shell 12 gauge ammo is aimed to carry a few shells for a quick reload or to switch from slugs to buckshot when hunting or practicing.
  • Well Made & Sturdy： The shotgun shell holder, made of high-density elastic material, can fit perfectly for your gun.
  • Easy to Use: You just slide the buttstock shell holder down the stock and then insert your shell into the shotgun shell holder.
  • Size: The length is 15cm and the width is 9 cm, the size of the shell holder hole is 5*2.5cm which can hold a 12/20 gauge shell, in total hold an extra eight shells(left 2, right 6).
  • Wide Application: The tactical Cheek Rest Pad is suitable for most guns whose shells are 12/20 gauge, such as Mossberg 500, Remington 870, Maverick 88….
Check Stock

wrumava Rifle Hunting Buttstock Shotgun Shell Holder - Tactical Pouches 8 Butt Cartridges Pouch Bag Stock Cases Fits Most Shotguns

  • Material: shotgun shell holder be made of sturdy 600D elastic nylon Durable construction will hold up to years of use..
  • Design: 8 Shotgun 12 Gauge Ammo Holder ( 6 Shells On One Side, 2 On the Other Side) - Lengt.
  • Easy to use: Easy to slip on,and holds 8 shells perfectly and stays in place while skeet shooting all.
  • shotgun shell stock holder Fit for: fit rememington's and H&R Pardner's shotguns,stevens 350 12 gauge with pistol grip w/stock. And hold 12g.
  • After sale：shotgun shell holder buttstock purchased from our company are guarantee to keep in good repair for 90 days..
Check Stock