Reviews Shocks For Lowered Trucks

Godspeed LS-TS-SN-0003 Traction-S Performance Lowering Springs Improve Overall Handling And Steering Response

  • Compatible With Scion tC (AT20) 2011, 2012, 2013, 2014, 2015, 2016 All Models.
  • Spring Rate(Front/Rear): 5.01 kg/mm/4.5 kg/mm.
  • Enhances on-road vehicle performance quicker turn-in, enhanced steering response and improved cornering..
  • Multi Heat Treated SAE 9254 Wire, Cold Wound....
  • Designed To Work With OEM Shocks, Better With Aftermarket High Performance Shocks.
  • Engineered to ensure against rattling, clunking or rubbing even when pushed to the limit..
  • Lifetime Limited Warranty On Material Defect And....
Check Stock

ALDAN AMERICAN FRONT & REAR COILOVER KIT,ADJUSTABLE,FOR 68-72 A-BODY,GTO,CUTLASS,SBC

  • Brand New Aldan American Adjustable Coilover Kit for the Front and the Rear of the vehicles listed below (Front Part #AB2FMS and Rear Part #ABRMS)..
  • Fits: 1968-1972 A-Body with a Small Block Chevy engine.
  • Features: Single adjustable coilovers | Adjustable ride height: Front: from 0.0" to 2.0" lowered & Rear: from 0.5" to 3.0" lowered | Spring Rate: Front: 450 lbs/in & Rear: 140 lbs/in | Provides full adjustment of shocks, springs, and shock damping | Gas charged | 6 front and 11 rear adjustable valving selections.
  • Convert your front and rear suspension to coil-overs. Aldan Phantom Series, single adjustable coil-overs deliver superior handling & ride quality for a drastic improvement over stock suspension..
  • Aldan High tensile, high travel coil-springs provide greater consistency over stock springs. Aldan coil-over kits are ride-height adjustable allowing you to properly lower your ride-height. Great for street & autocross applications..
Check Stock

Godspeed LS-TS-SN-0003 Traction-S Performance Lowering Springs Reduce Body Roll Improved Handling Set of 4 compatible with Scion tC AT20 2011-16

  • Compatible With Scion tC (AT20) 2011, 2012, 2013, 2014, 2015, 2016 All Models.
  • Spring Rate(Front/Rear): 5.01 kg/mm/4.5 kg/mm.
  • Enhances on-road vehicle performance quicker turn-in, enhanced steering response and improved cornering..
  • Multi Heat Treated SAE 9254 Wire, Cold Wound....
  • Designed To Work With OEM Shocks, Better With Aftermarket High Performance Shocks.
  • Engineered to ensure against rattling, clunking or rubbing even when pushed to the limit..
  • Lifetime Limited Warranty On Material Defect And....
Check Stock

Godspeed LS-TS-FD-0006-C Traction-S Performance Lowering Springs, Reduce Body Roll, Improved Handling, Set of 4, compatible with Ford Mustang Coupe 1999-04

  • Compatible With Ford Mustang 1999, 2000, 2001, 2002, 2003, 2004.
  • Excludes COBRA with Rear Independent Suspensions.
  • Spring Rate(Front/Rear): 5KG kg/mm/4.11 kg/mm.
  • Enhances on-road vehicle performance quicker turn-in, enhanced steering response and improved cornering..
  • Multi Heat Treated SAE 9254 Wire, Cold Wound To Prevent Sag Overtime.
  • Powder Coat Finished For Corrosion Protection.
  • Designed To Work With OEM Shocks, Better With Aftermarket High Performance Shocks.
  • Engineered to ensure against rattling, clunking or rubbing even when pushed to the limit..
  • Lifetime Limited Warranty On Material Defect And Craftsmanship.
Check Stock

Hobbyfire Shocks Aluminum Threaded Absorber Damper Upgrades Parts Accessories for 1/10 Traxxas Slash 2WD 4×4 Rustler 4X4 VXL Stampede 4X4 Hoss 4X4 Replace 5862 (Light Blue)

  • These RC shocks are Perfect Compatible with 1/10 Traxxas Slash 2WD&4×4/Stampede 2WD&4×4/Rustler 2WD&4×4 VXL/Hoss 4X4 VXL/Ford F-150/Bandit RC Trucks..
  • High-quality materials—–The slash shocks is made of lightweight Aluminum alloy material, which is durable and improves the performance of the rc trucks.(These Shocks come without pre oiled so make sure you get some before installing).
  • Excellent quality—–CNC machined for precision.
  • Heavy duty good for big jumps. high protection and long durability.which provide the car ultimate reliability and performance.
  • 4 RC Shock Absorber set—–2x Alloy Front Shock Absorber (Total length:approx 100mm) & 2x Alloy Rear Shock Absorber (Total length:approx 115mm),with Screws. Replacement of 5862 Big Bore Shock Set with Springs.
  • Novel appearance and exquisite workmanship. Hobbyfire Quality Guarantee- 100% warrenty.
Check Stock

YHTAUTO Driver Side Truck Bed Storage Tool Box 33 LBS Lockable Replacement for Toyota Tacoma 2005-2021, Will fit 2019-2021 with storage box

  • YHTAUTO Truck Bed Tool Box Designed Specifically for Pickup Trucks, It Comes With a Number of Practical Features That Make It Ideal for Storing and Organizing Your Tools.
  • Each of Truck Toolbox Holds Up to 33 lbs of Tools and Gear or Other Things, for Security, This Tool Box Features One Built-In Lock for Safe and Secure Storage.
  • Replacement for 2005-2021 Toyota Tacoma Pickup Trucks.
  • The Swing Truck Toolboxes Mounted on the Driver Side of the Trucks.
  • Pull the Latch and the Swing Box Truck Toolboxes Pivot Nearly 180º Over Your Lowered Tailgate.
  • Please Double Check Your Vehicle Fits Our Compatibility Chart Before Buying. Do Not Hesitate to Contact us if You Have any Doubts or Queries.
Check Stock

Hobbyfire Shocks Aluminum Threaded Absorber Damper Upgrades Parts Accessories for 1/10 Traxxas Slash 2WD 4x4 Rustler 4X4 VXL Stampede 4X4 Hoss 4X4 Replace 5862 (Navy Blue)

  • These RC shocks are Perfect Compatible with 1/10 Traxxas Slash 2WD&4x4/Stampede 2WD&4x4/Rustler 2WD&4x4 VXL/Hoss 4X4 VXL/Ford F-150/Bandit RC Trucks..
  • High-quality materials-----The slash shocks is made of lightweight Aluminum alloy material, which is durable and improves the performance of the rc trucks.(These Shocks come without pre oiled so make sure you get some before installing).
  • Excellent quality-----CNC machined for precision.
  • Heavy duty good for big jumps. high protection and long durability.which provide the car ultimate reliability and performance.
  • 4 RC Shock Absorber set-----2x Alloy Front Shock Absorber (Total length:approx 100mm) & 2x Alloy Rear Shock Absorber (Total length:approx 115mm),with Screws. Replacement of 5862 Big Bore Shock Set with Springs.
  • Novel appearance and exquisite workmanship. Hobbyfire Quality Guarantee- 100% warrenty.
Check Stock

GLOBACT 4PCS Aluminum Front & Rear RC Shocks for 1/10 RC Truck Traxxas Slash 2WD/4×4 shocks Rustler 4X4 Stampede 4X4 Hoss 4X4 RC Car Replace 5862 (Red)

  • Perfect compatibility—–The RC shocks is Perfect Compatible with:1/10 Traxxas Slash 2WD&4×4/Stampede 2WD&4×4/Rustler 2WD&4×4 VXL/Hoss 2WD&4X4 VXL/Ford F-150/Bandit RC Trucks..
  • High-quality materials—The slash shocks is made of lightweight Aluminum alloy material, which is durable and improves the performance of the rc trucks.(These Shocks come without pre oiled so make sure you get some before installing).
  • 4 RC shocks Absorber set—2x Alloy Front Shock Absorber (Total length:approx 100mm) & 2x Alloy Rear Shock Absorber (Total length:approx 115mm),with Screws.
  • Excellent quality—CNC machined for precision.
  • Heavy duty good for big jumps. high protection and long durability.which gives the car ultimate reliability and performance.
  • Note—There is a small amount of lubricating oil inside the shock absorber. In order to better exert the shock absorption performance, it is recommended to add a small amount of shock absorption oil as needed before use. Do not use a large amount of lubricating oil to prevent leakage and soiling of the car. Please note that the spring diameter of the 4×4 diagonal shock absorber is 22mm when installed. You need to use long screws and washers to assist in installation (hole spacing 3mm).
Check Stock

GLOBACT 4PCS Aluminum Front & Rear RC Shocks for 1/10 RC Truck Traxxas Slash 2WD/4x4 shocks Rustler 4X4 shocks Stampede 4X4 shocks Hoss 4X4 Replace 5862 (Blue)

  • Perfect compatibility-----The RC shocks is Perfect Compatible with:1/10 Traxxas Slash 2WD&4x4/Stampede 2WD&4x4/Rustler 2WD&4x4 VXL/Hoss 2WD&4X4 VXL/Ford F-150/Bandit RC Trucks..
  • High-quality materials-----The slash shocks is made of lightweight Aluminum alloy material, which is durable and improves the performance of the rc trucks.(These Shocks come without pre oiled so make sure you get some before installing).
  • 4 RC shocks Absorber set-----2x Alloy Front Shock Absorber (Total length:approx 100mm) & 2x Alloy Rear Shock Absorber (Total length:approx 115mm),with Screws.
  • Excellent quality-----CNC machined for precision.
  • Heavy duty good for big jumps. high protection and long durability.which gives the car ultimate reliability and performance.
  • Note-----There is a small amount of lubricating oil inside the shock absorber. In order to better exert the shock absorption performance, it is recommended to add a small amount of shock absorption oil as needed before use. Do not use a large amount of lubricating oil to prevent leakage and soiling of the car. Please note that the spring diameter of the 4x4 diagonal shock absorber is 22mm when installed. You need to use long screws and washers to assist in installation (hole spacing 3mm).
Check Stock

EPINON for 1/10 Traxxas Slash Shocks Stampede Rustler Bandit Hoss All Aluminum Front & Rear Shocks Upgrade Parts RC Truck Replace Traxxas 5862 (4Pcs Blue)

  • ✔️【Compatibility】Compatible with 1/10 Traxxas Slash shocks 2WD & 4x4/Stampede shocks 4×4 & 2WD/Rustler shocks 4×4 & 2WD/Hoss shocks 4×4 & 2WD/Bandit shocks 4×4 & 2WD..
  • ✔️【Excellent Quality】CNC machined for precision, assembled with widened TIN shafts and springs to provide optimal bump and jump control for your Traxxas model, a built-in sealing ring can effectively prevent oil leakage..
  • ✔️【High-quality Material】Made of lightweight aluminum alloy material, which is durable and improves the performance of the RC trucks, Unique colors make your car unique..
  • ✔️【Shock Size】RC shocks Absorber set-----2×Alloy front shock absorber (Total length:100mm/3.9") & 2×Alloy rear shock absorber (Total length:115mm/ 4.5”)..
  • ✔️【What You Get】2×Front shock, 2×Rear shock, 8×Screws, 4×Washers. (This set contains a small amount of lubricating oil, which can be used directly without adding oil)..
Check Stock

EPINON All Aluminum Front & Rear Shocks for 1/10 Traxxas Slash 2WD/4x4 Stampede Rustler Bandit Hoss Upgrade Parts RC Truck Replace Traxxas 5862 (4PCS Green)

  • ✔️【Compatibility】Compatible with 1/10 Traxxas Slash shocks 2WD & 4x4/Stampede shocks 4×4 & 2WD/Rustler shocks 4×4 & 2WD/Hoss shocks 4×4 & 2WD/Bandit shocks 4×4 & 2WD..
  • ✔️【Excellent Quality】CNC machined for precision, assembled with widened TiN shafts and springs to provide optimal bump and jump control for your Traxxas model, a built-in sealing ring can effectively prevent oil leakage..
  • ✔️【High-quality Material】Made of lightweight aluminum alloy material, which is durable and improves the performance of the RC trucks, Unique colors make your car unique..
  • ✔️【Shock Size】RC shocks Absorber set-----2x Alloy front shock absorber (Total length:100mm/3.9") & 2x Alloy rear shock absorber (Total length:115mm/ 4.5”)..
  • ✔️【What You Get】2×front shock, 2×rear shock, 8×screws, 4×washers. (This set contains a small amount of lubricating oil, which can be used directly without adding oil)..
Check Stock

GLOBACT 4PCS Aluminum Front & Rear RC Shocks for 1/10 RC Truck Traxxas Slash 2WD/4x4 Shocks Rustler 4X4 Stampede 4X4 Hoss 4X4 Upgrade Parts RC Car Replace 5862 (Titanium Color)

  • Perfect compatibility-----The RC shocks is Perfect Compatible with:1/10 Traxxas Slash 2WD&4x4/Stampede 2WD&4x4/Rustler 2WD&4x4 VXL/Hoss 2WD&4X4 VXL/Ford F-150/Bandit RC Trucks..
  • High-quality materials-----The slash shocks is made of lightweight Aluminum alloy material, which is durable and improves the performance of the rc trucks.(These Shocks come without pre oiled so make sure you get some before installing).
  • 4 RC shocks Absorber set-----2x Alloy Front Shock Absorber (Total length:approx 100mm) & 2x Alloy Rear Shock Absorber (Total length:approx 115mm),with Screws.
  • Excellent quality-----CNC machined for precision.
  • Heavy duty good for big jumps. high protection and long durability.which gives the car ultimate reliability and performance.
  • Note-----There is a small amount of lubricating oil inside the shock absorber. In order to better exert the shock absorption performance, it is recommended to add a small amount of shock absorption oil as needed before use. Do not use a large amount of lubricating oil to prevent leakage and soiling of the car. Please note that the spring diameter of the 4x4 diagonal shock absorber is 22mm when installed. You need to use long screws and washers to assist in installation (hole spacing 3mm).
Check Stock

EPINON All Aluminum Front & Rear Shocks for 1/10 Traxxas Slash 2WD/4x4 Stampede Rustler Bandit Hoss Upgrade Parts RC Truck Replace Traxxas 5862 (4PCS Blue)

  • ✔️【Compatibility】Compatible with 1/10 Traxxas Slash shocks 2WD & 4x4/Stampede shocks 4×4 & 2WD/Rustler shocks 4×4 & 2WD/Hoss shocks 4×4 & 2WD/Bandit shocks 4×4 & 2WD..
  • ✔️【Excellent Quality】CNC machined for precision, assembled with widened TiN shafts and springs to provide optimal bump and jump control for your Traxxas model, a built-in sealing ring can effectively prevent oil leakage..
  • ✔️【High-quality Material】Made of lightweight aluminum alloy material, which is durable and improves the performance of the RC trucks, Unique colors make your car unique..
  • ✔️【Shock Size】RC shocks Absorber set-----2x Alloy front shock absorber (Total length:100mm/3.9") & 2x Alloy rear shock absorber (Total length:115mm/ 4.5”)..
  • ✔️【What You Get】2×front shock, 2×rear shock, 8×screws, 4×washers. (This set contains a small amount of lubricating oil, which can be used directly without adding oil)..
Check Stock