Reviews Shelf Roller Track

DIYHD SLD-10FT Sliding Hardware Rolling Library Kit(No Ladder), 10ft, Stainless Steel

  • Ladder and Floor roller are NOT included.
  • 10FT is 2pcs 5ft track with a connector,Only top sliding hardware,not including ladder and floor roller.
  • Roller is 10° bent to make it sutable for ladder.
  • Track had been pre-drilled holes for track&wall connector("+" across screw tight on the wall/cabinet).
  • Package's including:Roller*2,Stop*2,5ft track*2,joint-in track connector*1,track&wall connector*8,thick spacer*8,end cap*2.
Check Stock

DIYHD SLD-8FT Sliding Hardware Rolling Library Kit(No Ladder), 8ft, Stainless Steel

  • Only hardware,not including ladder and floor roller.
  • Roller is 10° bent to make it sutable for ladder.
  • Track had been pre-drilled holes for track&wall connector("+" across screw tight on the wall/cabinet).
  • Package's including:Roller*2,Stop*2,4ft track*2,track connector*1,track&wall connector*6,thick spacer*6,end cap*2.
Check Stock

DIYHD 4FT Home Office Rolling Library Ladder Hardware,Black Sliding Rail Kit for Bookshelf

  • Only hardware,not including ladder,not including floor roller.
  • Roller is 10° bent to make it sutable for ladder.
  • Track had been pre-drilled holes for track&wall connector("+" across screw tight on the wall/cabinet).
  • Package's including:Roller*2,Stop*2,4FT track*1,track&wall connector*2,end cap*2.
Check Stock

KINMADE Serene Rolling Ladder Hardware Library Sliding Ladder Hardware Kit with 39'' (1000mm) Round Track/Rail

  • Sometimes a shelf is so high that you hardly use the upper storage room because it is not convenient to reach. While a normal ladder might be a little bit too heavy for a teenager or a lady, these easy gliding rollers designed for ladders help you glide the ladder left or right with minimal effort..
  • Creatively designed and devotedly manufactured, this KINMADE SERENE roller is able to reduce the noise of rolling by an incredible amount. Additionally, each roller actually consists of two rollers, the design of which keeps the ladder from derailing, minimizing the risk of falling..
  • BOTTOM rollers are included in the kit.The position and angle to install the bottom roller can be adjusted to your most comfortable and satisfactory. It can even make up for the little shortness of the ladder (just to install the bottom roller lower). You could remove the bottom roller if you think it is dangerous to have rollers on both ends..
  • A standard SERENE rolling library ladder hardware kit includes: a 39 3/4'' (1000mm) track, a pair of SERENE rollers, a pair of bottom rollers, two stoppers, two end caps and all necessary screws..
  • *Ladder NOT included. Hardware ONLY. *Assembly Required..
Check Stock

Step2 Farther & Faster Coaster Track Expansion Pack, Second Edition | Extra Track for Roller Coaster Toys

  • Now their favorite roller coaster ride-on toy can grow with your child for tons of fun..
  • Track expansion pack adds 5 inches to the roller coaster toy loading platform and 4 feet of roller coaster toy track..
  • Continue to challenge kids’ motor skills and build confidence with the larger roller coaster toy configuration..
  • Made EverTough, the Farther and Faster Coaster Track Expansion Pack, Second Edition is uniquely indestructible, ready to outlast hours of playtime fun ride after ride..
  • Track expansion pack is compatible with our award-winning Step2 Unicorn Up and Down Roller Coaster (4937), Step2 Up and Down Roller Coaster Rapid Ride and Hide (4051), Step2 Thomas the Tank Engine Up and Down Coaster (7366) and the Step2 Paw Patrol Adventure Coaster (4139). Other Step2 coasters may require a different expansion pack..
Check Stock

The ROP Shop | 2\ Nylon Garage Door Roller with 4\ Stem & 11-Ball 6200ZZ Precision Bearing

  • The ROP Shop replacement 2" White Nylon Roller with 6200ZZ Bearing Offer Softer, Quieter Garage Door Use.
  • Specs - Roller Diameter: 1 13/16" for a 2" track. Roller Thickness: 1/2". Stem Length: 4 1/8" (3.5" from bevel). Stem Diameter: 7/16". Single Load: 150lbs. Bearing Type: 6200ZZ Precision. Roller Material: Nylon. Roller Color: White. Refer to images 2 & 3 for more information.
  • Rollers are constructed from nylon that is softer and quieter than plastic or metal rollers and smoother than original equipment rollers. Features a reinforced dual-wall bearing cage, sealed 6200ZZ ball bearing plus double plating thickness on stem designed for max performance and ultra-life weather protection. Garage door roller can reuse 100,000 cycles.
  • Installation Tips - Method 1: Slightly bend track at the seam to remove, replace roller and move the door to do the next roller (repeat on other side). Method 2: Remove screws that attach brackets to your door, secure cable before releasing the bottom brackets that are under the cable spring tension, then clamp the cable to the track, slide out old rollers, place new rollers in their place and screw in backers.
Check Stock

The ROP Shop | (Pack of 2) 2\ Nylon Rollers with 6200ZZ Bearing Offer Quieter Garage Door Use

  • The ROP Shop replacement 2" Nylon Roller with 11-Ball Bearing for Residential & Commercial Garage Door.
  • Specs - Roller Diameter: 1 13/16" for a 2" track. Roller Thickness: 1/2". Stem Length: 4 1/8" (3.5" from bevel). Stem Diameter: 7/16". Single Load: 150lbs. Bearing Type: 6200ZZ Precision. Roller Material: Nylon. Roller Color: White. Refer to images 2 & 3 for more information.
  • Rollers are constructed from nylon that is softer and quieter than plastic or metal rollers and smoother than original equipment rollers. Features a reinforced dual-wall bearing cage, sealed 6200ZZ ball bearing plus double plating thickness on stem designed for max performance and ultra-life weather protection. Garage door roller can reuse 100,000 cycles.
  • Installation Tips - Method 1: Slightly bend track at the seam to remove, replace roller and move the door to do the next roller (repeat on other side). Method 2: Remove screws that attach brackets to your door, secure cable before releasing the bottom brackets that are under the cable spring tension, then clamp the cable to the track, slide out old rollers, place new rollers in their place and screw in backers.
Check Stock

(12) Garage Door 2\ Nylon Roller 4\ Stem 11 Ball Bearing Smooth Quiet Heavy Duty by The ROP Shop

  • The ROP Shop replacement 2" Nylon Garage Door Roller with 4" Stem & 11-Ball 6200ZZ Precision Bearing.
  • Specs - Roller Diameter: 1 13/16" for a 2" track. Roller Thickness: 1/2". Stem Length: 4 1/8" (3.5" from bevel). Stem Diameter: 7/16". Single Load: 150lbs. Bearing Type: 6200ZZ Precision. Roller Material: Nylon. Roller Color: White. Refer to images 2 & 3 for more information.
  • Rollers are constructed from nylon that is softer and quieter than plastic or metal rollers and smoother than original equipment rollers. Features a reinforced dual-wall bearing cage, sealed 6200ZZ ball bearing plus double plating thickness on stem designed for max performance and ultra-life weather protection. Garage door roller can reuse 100,000 cycles.
  • Installation Tips - Method 1: Slightly bend track at the seam to remove, replace roller and move the door to do the next roller (repeat on other side). Method 2: Remove screws that attach brackets to your door, secure cable before releasing the bottom brackets that are under the cable spring tension, then clamp the cable to the track, slide out old rollers, place new rollers in their place and screw in backers.
Check Stock

(6) Garage Door 2\ NYLON ROLLER Wheel w/ Cap 7\ Shaft 13 Ball Bearing Sealed by The ROP Shop

  • Specs - Roller Diameter: 1 13/16" for a 2" track. Stem Length: 4" (3.75" from bevel). Stem Diameter: 7/16". Single Load: 75 lbs. Ball Bearings: 13. Roller Material: Nylon. Roller Color: White. Refer to images 2 & 3 for more information.
  • Includes - (1) Sealed Nylon Garage Door Roller.
  • Rollers are constructed from nylon that is softer and quieter than plastic or metal rollers and smoother than original equipment rollers. Features a reinforced dual-wall bearing cage, sealed precision ball bearing with backside protective dust shield. Plus double plating thickness on stem is designed for max performance and ultra-life weather protection. Garage door roller rated for up to 20,000 cycles on a 12' door.
  • Installation Tips - Method 1: Slightly bend track at the seam to remove, replace roller and move the door to do the next roller (repeat on other side). Method 2: Remove screws that attach brackets to your door, secure cable before releasing the bottom brackets that are under the cable spring tension, then clamp the cable to the track, slide out old rollers, place new rollers in their place and screw in backers.
Check Stock

(10) Garage Door 2\ Nylon Rollers w/Cap 7\ Stem 13 Ball Bearing Heavy Duty by The ROP Shop

  • The ROP Shop replacement (Pack of 12) 2" Nylon Garage Door Rollers with 4" Stem & 11-Ball 6200ZZ Bearing.
  • Specs - Roller Diameter: 1 13/16" for a 2" track. Roller Thickness: 1/2". Stem Length: 4 1/8" (3.5" from bevel). Stem Diameter: 7/16". Single Load: 150lbs. Bearing Type: 6200ZZ Precision. Roller Material: Nylon. Roller Color: White. Refer to images 2 & 3 for more information.
  • Rollers are constructed from nylon that is softer and quieter than plastic or metal rollers and smoother than original equipment rollers. Features a reinforced dual-wall bearing cage, sealed 6200ZZ ball bearing plus double plating thickness on stem designed for max performance and ultra-life weather protection. Garage door roller can reuse 100,000 cycles.
  • Installation Tips - Method 1: Slightly bend track at the seam to remove, replace roller and move the door to do the next roller (repeat on other side). Method 2: Remove screws that attach brackets to your door, secure cable before releasing the bottom brackets that are under the cable spring tension, then clamp the cable to the track, slide out old rollers, place new rollers in their place and screw in backers.
Check Stock

(10) Garage Door 2\ Nylon Roller Wheels w/Cap 7\ Shaft 13 Ball Bearing Sealed by The ROP Shop

  • The ROP Shop replacement (Pack of 6) 2" Nylon Garage Door Rollers with 4" Stem & 11-Ball 6200ZZ Bearing.
  • Specs - Roller Diameter: 1 13/16" for a 2" track. Roller Thickness: 1/2". Stem Length: 4 1/8" (3.5" from bevel). Stem Diameter: 7/16". Single Load: 150lbs. Bearing Type: 6200ZZ Precision. Roller Material: Nylon. Roller Color: White. Refer to images 2 & 3 for more information.
  • Rollers are constructed from nylon that is softer and quieter than plastic or metal rollers and smoother than original equipment rollers. Features a reinforced dual-wall bearing cage, sealed 6200ZZ ball bearing plus double plating thickness on stem designed for max performance and ultra-life weather protection. Garage door roller can reuse 100,000 cycles.
  • Installation Tips - Method 1: Slightly bend track at the seam to remove, replace roller and move the door to do the next roller (repeat on other side). Method 2: Remove screws that attach brackets to your door, secure cable before releasing the bottom brackets that are under the cable spring tension, then clamp the cable to the track, slide out old rollers, place new rollers in their place and screw in backers.
Check Stock

(12) Garage Door 2\ NYLON ROLLERS w/ Cap 7\ Stem 13 Ball Bearing Heavy Duty by The ROP Shop

  • The ROP Shop replacement (Pack of 10) 2" Nylon Garage Door Rollers with 4" Stem & 11-Ball 6200ZZ Bearing.
  • Specs - Roller Diameter: 1 13/16" for a 2" track. Roller Thickness: 1/2". Stem Length: 4 1/8" (3.5" from bevel). Stem Diameter: 7/16". Single Load: 150lbs. Bearing Type: 6200ZZ Precision. Roller Material: Nylon. Roller Color: White. Refer to images 2 & 3 for more information.
  • Rollers are constructed from nylon that is softer and quieter than plastic or metal rollers and smoother than original equipment rollers. Features a reinforced dual-wall bearing cage, sealed 6200ZZ ball bearing plus double plating thickness on stem designed for max performance and ultra-life weather protection. Garage door roller can reuse 100,000 cycles.
  • Installation Tips - Method 1: Slightly bend track at the seam to remove, replace roller and move the door to do the next roller (repeat on other side). Method 2: Remove screws that attach brackets to your door, secure cable before releasing the bottom brackets that are under the cable spring tension, then clamp the cable to the track, slide out old rollers, place new rollers in their place and screw in backers.
Check Stock

Garage Door 2\ NYLON ROLLER w/ Cap 7\ Stem 13 Ball Bearing Heavy Duty Smooth by The ROP Shop

  • The ROP Shop replacement (Pack of 2) 2" Nylon Rollers with 6200ZZ Bearing Offer Quieter Garage Door Use.
  • Specs - Roller Diameter: 1 13/16" for a 2" track. Roller Thickness: 1/2". Stem Length: 4 1/8" (3.5" from bevel). Stem Diameter: 7/16". Single Load: 150lbs. Bearing Type: 6200ZZ Precision. Roller Material: Nylon. Roller Color: White. Refer to images 2 & 3 for more information.
  • Rollers are constructed from nylon that is softer and quieter than plastic or metal rollers and smoother than original equipment rollers. Features a reinforced dual-wall bearing cage, sealed 6200ZZ ball bearing plus double plating thickness on stem designed for max performance and ultra-life weather protection. Garage door roller can reuse 100,000 cycles.
  • Installation Tips - Method 1: Slightly bend track at the seam to remove, replace roller and move the door to do the next roller (repeat on other side). Method 2: Remove screws that attach brackets to your door, secure cable before releasing the bottom brackets that are under the cable spring tension, then clamp the cable to the track, slide out old rollers, place new rollers in their place and screw in backers.
Check Stock