Reviews Sharp Distance Sensor Arduino

Mxzzand 3in Industrial Robot Parts Accessories Omnidirectional Wheel Metal 2Pcs for Industry Production with 10pcs Driven Roller

  • ...dge Connectors, 3 Cube Connectors, 1 L Connector, 1 U Connector. 2 Snap Connector Caps, 2 3" Rectangle Connectors, 2 4" Rectangle Connectors, 2 5" Rectangle Connectors, 2 T Connectors, 8 Colored Foam Cubes, various screws and nuts.
  • 2 Arduino-Uno-Compatible Boards, 1 USB A-B Cable, 1 Joystick, 1 RGB LED, 1 Ultrasonic Distance Sensor, 8 Red LEDs, 8 Green LEDs, 8 Blue LEDs, 8 Yellow LEDs, 2 7-Color LEDs, 2 GRB LEDs, 12 220 Ohm Resistors, 12 10k Ohm Resistors, 1 LDR VT90N2 Photoresistor, jumper wires, 3 10k Potentiometers, 1 Fullsize Breadboard, 6 Push Buttons.
  • 1 9V Battery Holder, 1 Mini Breadboard, 1 Linkbot-Arduino Cable, 1 2-in-1 Dual Phillips/Slotted Screwdriver, 3 Snap Connectors, 1 Cube Connector, 1 L Connector, 3 Mounting Plates, 2 Sensor Bracket, 1 Li-ion Rechargeable Battery,.
  • 1 Color Sensor, 2 Short Distance IR Distance Sensors,1 RGB LED Module with Common Positive Lead (Common Anode), 2 RGB LED Module with Common Negative Lead (Common Cathode), 2 Ultrasonic Range Sensors, 1 IR Range Sensor, 1 Cable for IR Range Sensor, 2 Light Sensors, 3 Line Following Sensors, 2 Touch Sensors, 4 Sensor Brackets, 4 Sensor Inserts, 1 Universal Pan-Tilt, 3 Pan-Tilt Mounts, PDF file for textbook "Learning Physical Computing with Arduino for the Absolute Beginner".
Check Stock

10PCS/LOT GP2Y0A21YK0F 100% New 2Y0A21 10-80cm Infrared Distance Sensor Including Wires

  • GP2Y0A21YK0F IR Analog Distance Sensor Module Distance Measurment Sensor Range for Arduino 10CM-80CM Cable.
Check Stock

Kiro&Seeu 2PCS Microwave Doppler Radar Motion Detector Sensor RCWL-0516 Module Board Switch Compatible with Ar-duino Raspberry PI,Human Rat Cat Detector, (CWL-0516-MD-2P)

  • This RCWL-0516 module has the characteristics of high sensitivity, high induction distance, high reliability, large induction angle, wide power supply voltage range, etc. it is widely used in various kinds of human body induction lighting and alarm and so on..
  • The RCWL-0516 microwave radar sensor module can detect inert object at the condition that it has enough density, volume and it is in motion..
  • Microwave radar sensor will sense motion through most anything. The more shielding there is, the less detection range you get. I can detect motion through glass, drywall walls, ceilings and floors. It is very sensitive. You might have to filter the power supply. Tutorials contact us..
  • It can work with (for) arduino/nodemcu/wemos etc..
  • It can detect human, cat, rat, water. Works with Arduino and Nodemcu Document link, please contact us..
  • high sensitivity, high induction distance, high reliability, large induction angle, wide power supply voltage range ,it is widely used in various kinds of human body induction lighting and alarm and so on.
Check Stock

DollaTek GY-30 BH1750FVI Digital Light Intensity Sensor Module I2C Raspberry Pi

  • ANMBEST Pulsesensor Pulse Heart Rate Sensor is a plug-and-play heart-rate sensor for Arduino and Arduino compatibles..
  • Pulse Sensor adds amplification and noise cancellation circuitry to the hardware. It's noticeably faster and easier to get reliable pulse readings. The Pulse Sensor works with either a 3V or 5V Arduino..
  • The sensor can be worn on the finger or earlobe..
  • Supported development boards are Uno R3, mega2560, leonardo, 51 series, msp430 series, KL25Z. s..
  • NOTE: This product is NOT a professional medical device and should not be used to diagnose or treat medical conditions..
Check Stock

ACEIRMC VL6180 VL6180X Range Finder Optical Ranging Light Sensor Module Gesture Recognition Sensor I2C Interface 3.3V 5V Emitter Ambient Light Sensor for Arduino I2C (4)

  • VL6180 VL6180X Range Finder Optical Ranging Sensor Module Gesture Recognition Sensor.
  • VL6180 is a time-of-flight ranging sensor. The sensor contains a very small laser source and a matching sensor..
  • I2C interface for device control and data, two programmable GPIOs..
  • VL6180X can detect the "time of flight" or the time required for the laser to recover the sensor to calculate the distance..
  • VL6180 VL6180X Range Finder Optical Ranging Sensor Module for Arduino I2C Interface 3.3V 5V gesture recognition.
Check Stock

Adafruit (PID 3316 VL6180X Time of Flight Distance Ranging Sensor (VL6180)

  • On Board 5V regulator and level shifting.
  • Works with Arduino and other micro controller projects.
Check Stock

Hailege 5pcs HY-SRF05 Ultrasonic Sensor Module DC 5V HY-SRF05 Distance Measure Sensor for Arduino Raspberry Pi

  • Output signal: Electric frequency signal, high level 5V, low level 0V. Sensor angle: Not more than 15 degrees..
Check Stock

CQRobot Ocean: VL53L1X Time-of-Flight (ToF) Long Distance Ranging Sensor, Compatible with Raspberry Pi/Arduino/STM32 Board, I2C Interface. for Mobile Robot, UAV, Detection Mode, Camera, Smart Home.

  • VL53L1X Time-of-Flight (ToF) Long Distance Ranging Sensor, 4 meters Accuracy, 50Hz Ranging Frequency. The VL53L1X uses ST's latest ToF technology, which integrates physical infrared filters and optical components to provide distance measurement and immunity to interference regardless of target color and reflectivity..
  • The FlightSense sensor directly measures the distance between the object and the sensor based on the photon round-trip flight time. The measurement accuracy is not affected by the surface characteristics of the measured object, making the low-power high-precision ranging and proximity detection function suitable for a wider range of applications..
  • Used in Mobile Robot, UAV, Detection Mode, Camera, Architecture and Lighting, Smart Home, Inventory Management..
  • I2C Communication Interface, Control the module on/off via IO pins..
  • Onboard level conversion circuit, compatible with 3.3V and 5V working levels, Compatible with Arduino Motherboard, Raspberry Pi Motherboard and STM32 Motherboard..
Check Stock

KEYESTUDIO 48 Sensors Modules Starter Kit for Arduino with LCD, 5v Relay, IR Receiver, LED Modules, Servo Motor, Temperture, Gas Sensor, Programming for Beginners Adults Learning

  • This electronic sensor kit contains 48 pieces most popular and mainstream sensors and modules, allow you to do a lot devices, robots and other interactive device with the best price. This kit Not contains arduino controller board..
  • Compatible with various micro-controllers and Raspberry Pi, such as mega 2560, r3 development board, pro micro, leonardo, etc. Note we only offer arduino instructions..
  • We provide detailed projects for each sensor based on development board, including wiring method, test code, etc. Download the arduino tutorial from wiki website..
  • This is high quality sensor kit with exquisite packaging. It's a perfect present for junior high and high school inventors, hackers, designers, and tinkerers of all levels..
  • The tutorial shows wiring for the Arduino and gives example code. All of this makes getting started with sensors quite easy. The professional support team is ready to answer any questions..
Check Stock

AOICRIE Sensors Assortment Kit, 16 in 1 Sensor Starter Kit for Arduino Raspberry Project Super Starter Kits for R3 Mega2560 Mega328 Nano for Raspberry Pi 4b 3 2 Model B

  • For the beginner, 16 in 1 Modules Sensor Learning Package includes most projects design for those beginners and who want to know more about for Arduino, R3 Mega2560 Mega328 Nano for Raspberry Pi 3 2 Model B K62..
  • Those sensors will often being used in the beginner's project. It is included sound and obstacle avoidance sensor, obstacle avoidance sensor, temperature and humidity sensor, ultrasonic, a path tracing module and infrared human body induction sensor..
  • 16 Sensors Assortment Kit in One Starter Kit, This has 16 sensors modules and delicately selected sensors to detect temperature..
  • The highest cost performance kit for electronic hobbyist and advanced learners to expand for Raspberry Pi and for Arduino programming.Infrared sensor receiver module..
  • A great Kit for Arduino experiments or as a basis for a larger project.You will never have to worry about having the parts to complete your project with the most common modules being present in this package..
Check Stock

KEYESTUDIO MEGA Sensor Shield V1 for Arduino MEGA R3 2560 Prototype Board Projects

  • Nice Sensor shield of MEGA Rev3, Easy prototyping and Very convenient especially for 3PIN (G V S) connections. There are tons of ground and VCC headers making really it easy to connect various Arduino modules and sensors with DuPont style cables..
  • This sensor shield board really simplify the circuit and easily connect commonly used sensors.The board is having digital and analog interface, Bluetooth module communication interface, SD Card module communication interface, APC 220 radio frequency module interface, etc..
  • This sensor shield allows ease development and prototyping and makes convenient way to connect many external devices/sensors..
  • This board works well for prototyping or certain permanent applications and a very handy companion to an Mega Rev3 or compatible board..
  • 100% Compatible with the programming software for Arduino. Excellent shield board in good quality and packaged in a nice box! Great for all kinds of scientific experiment research for Arduino.
Check Stock

DWEII 12PCS RCWL-0516 Motion Detection Sensor, Microwave Radar Sensor, Switch Module, for Arduino ESP8266 Nodemcu Wemos, for Raspberry PI, for Human Rat Cat Detector, Detection Distance 5-7m

  • This RCWL-0516 module has the characteristics of high sensitivity, high induction distance, high reliability, large induction angle, wide power supply voltage range, etc. it is widely used in various kinds of human body induction lighting and alarm and so on..
  • Compatible with Arduino Raspberry PI,Human Rat Cat Detector for nodemcu for wemos etc..
  • It also can detect human, cat, rat, water.
  • Wide operating voltage range: 4.0-28.0V, output 3.3V power supply.
  • RCWL-0516 RCWL 0516 Microwave Radar Sensor Human Sensor Body Sensor Module.
  • What you will get: 12pcs RCWL-0516 Module, 40 pins header.
Check Stock

kuman Compatible For Arduino Raspberry pi Sensor kit 37 in 1 Robot Projects Starter Kits with Tutorials Compatible for Arduino RPi 3 2 Model B B+ K5

  • Professional 37-in-1 Sensor Module Kit, NOT ONLY compatible for ARDUINO, BUT ALSO compatible for raspberry pi RPi 3 2 Model B A A+ B+.
  • Complete Update and common models for arduino Mega 2560 starter kit.
  • Great sensor kit with tutorials compatible for Arduino and raspberry pi..
  • Standard interface can be controlled directly by microcontroller ( 8051, AVR, PIC, DSP, ARM, ARM, MSP430, TTL logic).
  • Detailed tutorials including project introduction and source code CAN BE PROVIDED..
Check Stock